GE IC694DSM324 Motion Controller Module High Quality

Overview

The IC694DSM324 is a four-axis motion control module for the PACSystems RX3i platform. It delivers high-performance motion control for industrial applications such as packaging, robotics, and material handling. The module supports standard and follower control modes, ensuring flexible and precise operation. It communicates with the host controller via RS232/RS485, Modbus, and Ethernet. Users can program up to 10 programs and 40 subroutines stored in non-volatile flash memory. The module also provides electronic CAM, position control, velocity control, and homing routines.

Technical Specifications

• Product Type: Motion Controller Module
• System Platform: PACSystems RX3i
• Control Modes: Standard Mode, Follower Mode
• Supported Servo Systems: GE Fanuc αi, βHVi, αHVi series
• Number of Motion Axes: 1 to 4 axes
• Memory Type: Non-volatile flash memory
• Memory Capacity: Stores up to 10 programs and 40 subroutines
• Block Processing Time: Less than 5 milliseconds
• Analog Output Resolution: 13-bit
• Switch Inputs: Dedicated inputs for each servo axis
• LED Indicators: STATUS, CONFIG, FSSB, Axis (4)
• Communication Ports:
  • 24 VDC I/O: 36-pin D-shell
  • 5 VDC I/O: 36-pin D-shell
  • COM Port: RJ45
  • FSSB port
• Power Requirements: 806 mA @ 5 VDC; Additional 500 mA for external encoder if used
• Backplane Current Draw: 860 mA @ 5 VDC
• Mounting Location: Main rack, expansion or remote baseplate
• Hot Swapping: Supported
• Multi-Axis Control: Supported
• Electronic CAM: Supported
• Compatible CPUs: RX3i CPUs Version 2.8 or later
• Compatible Power Supplies: PWR040, PWR321, PWR330, PWR331
• Module Limits:
  • Up to 5 modules on main rack with PWR040
  • Up to 6 modules on expansion/remote backplane with PWR330/PWR331
• Weight: 0.65 lbs
• Slot Width: Single slot
• Product Lifecycle Status: Active