
وقتی این محصول در دسترس قرار گرفت، از طریق ایمیل اطلاعرسانی شود
- توضیحات
- Reviews
- ارسال و پرداخت
The Schneider BMXCPS2010 is an isolated 24 VDC power supply module for the Modicon X80 platform, providing power to the I/O modules and processor through the rack backplane. It delivers 16.8 W at 24 VDC and 8.3 W at 3.3 VDC for the I/O logic supply. The module includes secondary-circuit overload, overvoltage and short-circuit protection, along with a rack voltage status LED and a RESET button for cold restart.
Power Supply Function
The BMXCPS2010 converts an external isolated 24 VDC input into the secondary supply rails required by the Modicon X80 rack. Its outputs serve different functions: the 24 VDC rail supplies the I/O modules and processor, while the 3.3 VDC rail supplies I/O module logic.
The module provides 0.7 A at 24 VDC and 2.5 A at 3.3 VDC. These separate output ratings should be considered when checking the total power requirements of the installed rack configuration.
Protection and Status Indication
The secondary circuits include overload, overvoltage and short-circuit protection for the 24 VDC sensor supply. The primary-circuit internal fuse is not accessible. A green LED indicates that rack voltage is OK, allowing maintenance personnel to check the power supply status locally.
A RESET button provides a cold-start reset function. The module also has a two-pin alarm relay connector for the alarm circuit.
Electrical Connections and Installation
The module uses a five-pin connector for the supply input, protective earth and 24 VDC input sensor connection. It must be installed in a compatible module rack and secured with two screws.
The specified maximum cable distances depend on the copper conductor cross-section:
- 20 m with 1.5 mm2 copper power supply cable.
- 30 m with 2.5 mm2 copper power supply cable.
The specified power interruption immunity is 1 ms. Primary-to-earth and primary-to-secondary insulation resistance are both at least 10 MOhm.
Parameter Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS2010 |
| Brand | Schneider Electric |
| Product Type | Modicon X80 Power Supply Module |
| Series | Modicon X80 |
| Primary Voltage | 24 VDC, isolated |
| Primary Voltage Range | 18-31.2 VDC |
| Input Current | 1 A at 24 VDC |
| Inrush Current | 30 A at 24 VDC |
| Secondary Power | 16.8 W at 24 VDC; 8.3 W at 3.3 VDC |
| Secondary Current | 0.7 A at 24 VDC; 2.5 A at 3.3 VDC |
| Maximum Power Dissipation | 8.5 W |
| Power Interruption Immunity | 1 ms |
| Protection | Secondary overload, overvoltage and short-circuit protection |
| Status Indicator | 1 green LED, rack voltage OK |
| Reset Function | Cold-start RESET button |
| Electrical Connections | 2-pin alarm relay connector; 5-pin power supply connector |
| Maximum Cable Distance | 20 m with 1.5 mm2 copper cable; 30 m with 2.5 mm2 copper cable |
| Insulation Resistance | At least 10 MOhm, primary/earth and primary/secondary |
| Dielectric Strength | 1500 V, primary/earth and primary/secondary |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Coating | TC |
| Operating Altitude | 0-2000 m; derating required from 2000 to 5000 m |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 gn |
| MTBF | 4,886,000 h |
| Weight | 0.29 kg |
| EAN | 3595863909005 |
| Total Lifecycle Carbon Footprint | 456 kg CO2 eq. |
Backplane Compatibility
The BMXCPS2010 is designed for Modicon X80 module racks used in Modicon M340 and Modicon M580 automation architectures. However, it is explicitly listed as not compatible with BMEXBP..02 backplanes. Rack selection should therefore be checked against the exact backplane reference before installation.
The module is specified for IP20 protection and compliance with EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201. Listed approvals include CE, RCM, Merchant Navy, CSA, EAC and UL.
Frequently Asked Questions
Q: Can the BMXCPS2010 operate with a 24 VDC input below 24 V?
A: Yes. Its specified primary voltage range is 18-31.2 VDC. The input supply should remain within this range under normal operating and load conditions.
Q: Is the BMXCPS2010 compatible with all Modicon X80 backplanes?
A: No. Although it is specified for Modicon X80 racks, it is explicitly excluded from BMEXBP..02 backplanes. Check the exact rack reference before selecting this power supply.
Q: What is the difference between the 24 VDC and 3.3 VDC outputs?
A: The 24 VDC output supplies the I/O modules and processor, while the 3.3 VDC output supplies I/O module logic. Both output power ratings must be considered when checking the rack power budget.
پرداخت: حواله بانکی، وسترن یونیون.
بندر حمل: شیامن.
زمان آمادهسازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).
تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام میشود.
پرسشهای متداول
پرسشهای متداول درباره قیمتها، ارسال، گارانتی و مرجوعیدر صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.
اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده میشوند. بیشتر سفارشها از انبار ما در چین ارسال میشوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.
بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه ارسال و زمان حملونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.
ما معمولاً از خدمات پیک بینالمللی DHL، FedEx، UPS و سایر شرکتها استفاده میکنیم. شرکت حملونقل را میتوان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.
محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابلاعمال و دستورالعملهای بازگشت را تأیید کنید.
ممکن است اینها را هم بپسندید
پستهای وبلاگ
اخبار اتوماسیون صنعتی، راهنماهای فنی و بهروزرسانیهای محصولات.
