پرش به اطلاعات محصول
1 از 3

Schneider BMXDAI1615 Modicon X80 Discrete Input Module

18 موجود است
  • Manufacturer: Schneider
  • Product No.: BMXDAI1615
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Input Module
  • Condition: کاملاً نو
  • Payment: حواله تلگرافی، وسترن یونیون
  • Weight: 0.157 kg
  • Shipping port: شیامن
  • Warranty: ۱۲ ماه
  • توضیحات
  • Reviews
  • ارسال و پرداخت

The Schneider Electric BMXDAI1615 is a 16-channel isolated AC discrete input module in the Modicon X80 range. It accepts 200-240 V AC field signals and transfers their status to the PLC through the X80 backplane. Capacitive input circuits, individual channel diagnostics and 10 ms activation response make it suitable for monitoring AC switching signals and compatible two-wire proximity sensors.

Input Configuration and Signal Characteristics

The BMXDAI1615 provides 16 electrically isolated input channels for AC signal acquisition. Its capacitive input design supports two-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 1.

The input thresholds distinguish valid ON and OFF states:

  • State 1: at least 164 V AC and 3 mA.
  • State 0: no more than 40 V AC and 2 mA.
  • Input impedance: 28 kOhm.
  • Input frequency: 47-63 Hz.
  • Sensor supply range: 170-264 V.
  • Maximum channel input voltage: 264 Vrms at 63 Hz.

The sensor voltage monitoring function identifies a sensor supply condition below 80 V AC as a fault and above 170 V AC as OK. These thresholds provide additional information for diagnosing field supply conditions.

Response Time and Electrical Isolation

The AC input response time is 10 ms for activation and 20 ms for deactivation. These values define the delay between a field signal transition and its recognition by the input module.

Channel-to-channel and channel-to-bus isolation are rated at 1780 Vrms for one minute. Insulation resistance is greater than 10 MOhm at 500 V DC. The module has a power dissipation of 5 W and a typical current consumption of 76 mA at 3.3 V DC.

Status Indication and Diagnostics

The module provides local LED indications for operating status and channel-level diagnostics:

  • RUN (green): Module operating status.
  • Channel LEDs (green): Individual input channel diagnostics.
  • ERR (red): Module error indication.
  • I/O (red): Module I/O fault indication.

Individual channel indicators help maintenance personnel identify input-related problems without relying exclusively on PLC application diagnostics.

Technical Specifications

Parameter Specification
Model BMXDAI1615
Brand Schneider Electric
Product Range Modicon X80
Product Type Discrete Input Module
Number of Inputs 16
Input Type Capacitive, isolated
Input Voltage 200-240 V AC
Input Current 3 mA
Input Frequency 50/60 Hz
Frequency Limits 47-63 Hz
Input Compatibility 2-wire proximity sensors
Input Logic IEC 61131-2 Type 1
Guaranteed State 1 Voltage >= 164 V
Guaranteed State 0 Voltage = 3 mA
Guaranteed State 0 Current 10 MOhm at 500 V DC
Channel-to-Channel Isolation 1780 Vrms for 1 minute
Channel-to-Bus Isolation 1780 Vrms for 1 minute
Typical Current Consumption 76 mA at 3.3 V DC
Maximum Current Consumption 126 mA at 3.3 V DC
Power Dissipation 5 W
MTBF 3,700,000 hours
Protection Rating IP20
Protective Treatment Standard version
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95%, non-condensing
Operating Altitude 0-2000 m; 2000-5000 m with derating
Pollution Degree 2
Vibration Resistance 3 gn
Shock Resistance 30 gn
Dimensions (H x W x D) 134.6 x 32 x 86 mm
Net Weight 0.157 kg
Dielectric Strength 1780 V AC, 50/60 Hz, 1 minute
Standards IEC 61131-2
Certifications and Markings CE, UKCA, cULus, EAC, RCM

Installation and System Configuration

The BMXDAI1615 is designed for installation in a Modicon X80 rack. It is identified as compatible with Modicon M340 and M580 PLC architectures, including local and remote I/O configurations.

The module uses a 40-way removable terminal block with caged or spring-type connections. It must be secured to the rack with two screws. The field wiring arrangement and terminal assignments should be checked against the applicable connection diagram before commissioning.

The maximum channel input voltage is 264 Vrms at 63 Hz. Applying a voltage above this limit can damage the input module.

Frequently Asked Questions

Q: How many AC input signals can the BMXDAI1615 monitor?

A: It supports 16 isolated AC input channels. Each channel monitors a 200-240 V AC field signal, subject to the specified input thresholds and electrical limits.

Q: Can the BMXDAI1615 connect to two-wire proximity sensors?

A: Yes. It supports two-wire AC proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 1. Sensor voltage and current characteristics must meet the module's input requirements.

Q: Which PLC platforms support the BMXDAI1615?

A: The module is specified for Modicon M340 and M580 PLC architectures, including local and remote I/O configurations. The rack and terminal block arrangement must match the module installation requirements.

پرداخت: حواله بانکی، وسترن یونیون.

بندر حمل: شیامن.

زمان آماده‌سازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).

تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال می‌کنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام می‌شود.

پرسش‌های متداول

پرسش‌های متداول درباره قیمت‌ها، ارسال، گارانتی و مرجوعی

در صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.

اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده می‌شوند. بیشتر سفارش‌ها از انبار ما در چین ارسال می‌شوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.

بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال می‌کنیم. هزینه ارسال و زمان حمل‌ونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.

ما معمولاً از خدمات پیک بین‌المللی DHL، FedEx، UPS و سایر شرکت‌ها استفاده می‌کنیم. شرکت حمل‌ونقل را می‌توان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.

محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابل‌اعمال و دستورالعمل‌های بازگشت را تأیید کنید.

Products FAQs

ممکن است این‌ها را هم بپسندید