
وقتی این محصول در دسترس قرار گرفت، از طریق ایمیل اطلاعرسانی شود
- توضیحات
- Reviews
- ارسال و پرداخت
The BMXDDM16025 is a mixed digital input/output module in Schneider Electric's Modicon X80 platform. It combines 24 VDC discrete input channels with relay output channels for interfacing field signals and switching external loads. The module provides 8 relay outputs rated for switching AC or DC circuits, with a 20-pin removable terminal block connection option and IP20 protection.
Functional Overview
The BMXDDM16025 handles discrete signal acquisition and relay-based output switching within a Modicon automation system. Its input circuits monitor 24 VDC field signals, while the relay outputs provide electrically switched contacts for controlling external devices.
The relay output arrangement allows the controller to switch loads supplied from separate external circuits rather than limiting output operation to the module's 24 VDC input supply. Output supply voltage and load conditions must be checked against the applicable relay ratings.
Digital Inputs and Relay Outputs
The input section uses 24 VDC discrete signal circuits with an input impedance of 6,800 Ohm. The input voltage detection thresholds distinguish sensor states: below 14 VDC is identified as a sensor fault, while above 18 VDC is identified as sensor OK.
The output section uses electromechanical relays. Its response time is specified as no more than 10 ms for activation and 8 ms for deactivation. The maximum switching voltage is specified as 264 VAC or 125 VDC. These switching limits should be considered separately from the field supply voltage and the permitted load current.
Signal Protection and Electrical Isolation
The module specifies an input protection arrangement with one external 0.5 A fast-acting fuse per input channel group. Separate external fast-acting fuse protection is specified for output channels or channel groups.
Electrical isolation specifications include more than 10 MOhm insulation resistance at 500 VDC. Dielectric strength is specified at 1,500 VAC for 1 minute between primary and secondary circuits, 2,830 VAC for 1 minute across relay outputs, and 500 VDC for 1 minute between I/O groups.
Modicon X80 Platform Integration
The BMXDDM16025 belongs to the Modicon X80 I/O platform, which provides a common hardware environment for Modicon M340 and M580 automation architectures. The module is specified for local or remote I/O configurations, subject to the applicable PLC, rack and hardware configuration.
The module is installed on a compatible module carrier and secured with two screws. A 20-pin cage-clamp, screw-clamp or removable spring-clamp terminal block is specified as the connection option. Verify the terminal block reference and rack configuration before installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM16025 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Mixed Digital I/O Relay Module |
| Digital Input Voltage | 24 VDC |
| Digital Input Impedance | 6,800 Ohm |
| Digital Input Channels | 8 channels (product page listing; see editorial note) |
| Digital Output Channels | 8 |
| Digital Output Type | Relay |
| Output Switching Voltage | 24-240 VAC (product designation) |
| Maximum Switching Voltage | 264 VAC / 125 VDC |
| Minimum Switching Current | 1 mA at 5 VDC |
| Output Response Time | 18 VDC: sensor OK |
| Insulation Resistance | > 10 MOhm at 500 VDC |
| Input Protection | One external 0.5 A fast-acting fuse per input channel group |
| Output Protection | External fast-acting fuse per output channel or channel group |
| Dielectric Strength | 1,500 VAC, 50/60 Hz, 1 min, primary/secondary |
| Relay Output Dielectric Strength | 2,830 VAC, 50/60 Hz, 1 min |
| I/O Group Isolation | 500 VDC, 1 min |
| Mounting | Modicon X80 module carrier, secured with 2 screws |
| Connection | 20-pin removable terminal block |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Climatic Treatment | TC |
| MTBF | Approximately 940,000 hours |
| Protective Coating | Standard version |
| Weight | 0.135 kg |
| EAN | 3595863910612 |
| Lifecycle Carbon Footprint | 27 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between the BMXDDM16025 and a transistor output module?
A: The BMXDDM16025 uses relay contacts for its discrete outputs, whereas transistor output modules use semiconductor switching. Relay outputs support specified AC and DC switching circuits, but their mechanical switching frequency and response characteristics differ from solid-state outputs.
Q: Can the relay outputs switch AC and DC loads?
A: Yes. The specified maximum switching voltages are 264 VAC and 125 VDC. The actual permissible load current depends on the applicable relay load ratings and operating conditions; the maximum voltage alone does not establish a 3 A rating for every load type.
Q: What should be checked before replacing an existing BMXDDM16025?
A: Verify the input channel count, relay output configuration, terminal block arrangement, external supply requirements and rack compatibility. Also check the controller's local or remote I/O configuration to ensure that the replacement matches the existing installation.
پرداخت: حواله بانکی، وسترن یونیون.
بندر حمل: شیامن.
زمان آمادهسازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).
تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام میشود.
پرسشهای متداول
پرسشهای متداول درباره قیمتها، ارسال، گارانتی و مرجوعیدر صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.
اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده میشوند. بیشتر سفارشها از انبار ما در چین ارسال میشوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.
بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه ارسال و زمان حملونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.
ما معمولاً از خدمات پیک بینالمللی DHL، FedEx، UPS و سایر شرکتها استفاده میکنیم. شرکت حملونقل را میتوان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.
محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابلاعمال و دستورالعملهای بازگشت را تأیید کنید.
ممکن است اینها را هم بپسندید
پستهای وبلاگ
اخبار اتوماسیون صنعتی، راهنماهای فنی و بهروزرسانیهای محصولات.
