
وقتی این محصول در دسترس قرار گرفت، از طریق ایمیل اطلاعرسانی شود
- توضیحات
- Reviews
- ارسال و پرداخت
The Schneider Electric BMXDRA0805 is an 8-channel discrete relay output module for the Modicon M340 automation platform. Part of the Modicon X80 range, it provides relay-based switching for DC output circuits with a specified 12-24 VDC operating range. The module supports removable 20-pin screw or spring terminal connections and is designed for harsh-environment installations in its H-rated configuration.
Functional Description
The BMXDRA0805 provides eight relay output channels for switching external loads through discrete control signals. Relay contacts provide electrically isolated switching between the control electronics and the connected output circuits, subject to the module's specified contact and wiring limits.
The module has an output activation response time of 10 ms and a deactivation response time of less than 8 ms. These values are relevant when evaluating output timing in control sequences, particularly where relay switching response must be considered separately from PLC scan time.
Electrical and Connection Characteristics
The module uses a removable 20-pin terminal connection, available with screw or spring-clamp wiring arrangements. The connection type should be matched to the installed terminal block and cabinet wiring configuration.
The specified minimum switching current is 10 mA at 5 VDC. This is a minimum contact-load condition, not the module's rated maximum switching current. Maximum contact voltage, current and load ratings should be checked against the applicable product documentation before connecting field devices.
Output Protection and Electrical Isolation
The output circuits do not have built-in short-circuit or overload protection. Schneider specifies an external fast-blow fuse for each relay or protected group of channels. For inductive loads, additional suppression is required: a discharge diode for DC circuits and an RC circuit or ZNO surge limiter for AC circuits.
The module has an insulation resistance greater than 10 MOhm at 500 VDC and a dielectric withstand rating of 2000 VAC at 50/60 Hz for 1 minute. These specifications are relevant when checking electrical separation and the protection arrangements of connected field circuits.
Environmental and Mechanical Characteristics
The module has an IP20 protection rating and a product weight of 0.145 kg. Its specified relative humidity range is 5-95% at 55 deg C, with no condensation permitted.
The BMXDRA0805H is the harsh-environment variant identified by the H suffix. The supplied Schneider product information associates this variant with a temperature range of -25 to +70 deg C and protective coating. These conditions should not be attributed to the standard BMXDRA0805 without the H suffix.
Lifecycle and Replacement Information
Schneider Electric lists the BMXDRA0805 as discontinued on 30 June 2022, with service scheduled to end on 30 June 2030, according to the supplied regional product record. The recommended replacement is BMXDRA0815, an 8-channel relay output module with a different specified DC voltage range of 24-125 VDC and an AC range of 24-240 VAC.
The replacement should not be treated as an electrically identical substitute. Check field supply voltage, relay load ratings, terminal arrangements and application requirements before changing the installed module.
Schneider Electric Österreich+1
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRA0805 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 8 |
| Output Type | Relay, normally open |
| Output Voltage | 12-24 VDC; 24-240 VAC |
| DC Operating Voltage Range | 10-34 VDC |
| AC Operating Voltage Range | 19-264 VAC |
| Conventional Free-Air Thermal Current | 3 A |
| Minimum Switching Current | 10 mA at 5 VDC |
| Output Activation Time | Less than 10 ms |
| Output Deactivation Time | Less than 8 ms |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Dielectric Strength | 2000 VAC at 50/60 Hz for 1 min |
| Power Dissipation | 2.7 W |
| Typical Current Consumption | 79 mA at 3.3 VDC |
| MTBF | 2,119,902 hours |
| Connection | Removable 20-pin terminal block |
| Terminal Type | Screw or spring-clamp |
| Output Protection | External fast-blow fuse; external inductive-load suppression |
| Protection Rating | IP20 |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Product Weight | 0.145 kg |
| EAN | 3595863910650 |
| Recommended Replacement | BMXDRA0815 |
Frequently Asked Questions
Q: Can the BMXDRA0805 switch both AC and DC loads?
A: Yes. Its relay outputs support specified AC and DC switching circuits. The documented ranges are 19-264 VAC and 10-34 VDC. The actual load must also satisfy the applicable relay switching and electrical durability ratings.
Q: Does the BMXDRA0805 provide built-in short-circuit protection?
A: No. External fast-blow fuses are required for the relay output circuits. Inductive loads also require suitable external suppression, selected according to whether the switched circuit is AC or DC.
Q: What is the difference between BMXDRA0805 and BMXDRA0805H?
A: The H suffix identifies the harsh-environment version. The supplied product information specifies a -25 to +70 deg C operating range and protective coating for this version. These characteristics should not be assumed for the standard BMXDRA0805.
پرداخت: حواله بانکی، وسترن یونیون.
بندر حمل: شیامن.
زمان آمادهسازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).
تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام میشود.
پرسشهای متداول
پرسشهای متداول درباره قیمتها، ارسال، گارانتی و مرجوعیدر صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.
اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده میشوند. بیشتر سفارشها از انبار ما در چین ارسال میشوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.
بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه ارسال و زمان حملونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.
ما معمولاً از خدمات پیک بینالمللی DHL، FedEx، UPS و سایر شرکتها استفاده میکنیم. شرکت حملونقل را میتوان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.
محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابلاعمال و دستورالعملهای بازگشت را تأیید کنید.
ممکن است اینها را هم بپسندید
پستهای وبلاگ
اخبار اتوماسیون صنعتی، راهنماهای فنی و بهروزرسانیهای محصولات.
