پرش به اطلاعات محصول
1 از 3

Schneider BMXDRA0815 Modicon X80 Relay Output Module

18 موجود است
  • Manufacturer: Schneider
  • Product No.: BMXDRA0815
  • Country of origin: France
  • Product Type: Modicon X80 Relay Output Module
  • Condition: کاملاً نو
  • Payment: حواله تلگرافی، وسترن یونیون
  • Weight: 0.169 kg
  • Shipping port: شیامن
  • Warranty: ۱۲ ماه
  • توضیحات
  • Reviews
  • ارسال و پرداخت

The BMXDRA0815 is an 8-channel discrete relay output module in the Schneider Electric Modicon X80 range. It provides eight electrically isolated normally open (NO) relay outputs for switching AC or DC loads. The module supports rated load voltages of 24-240 V AC and 24-125 V DC, with positive output logic and a standard protective coating. It is designed for Modicon M340 and M580 automation platforms.

Output Configuration and Operation

The BMXDRA0815 uses electromechanical relay contacts to switch external loads. Each of its eight output channels operates as a normally open contact, closing when the corresponding output command is activated and opening when the command is removed.

The relay contacts support both AC and DC switching. Unlike transistor output modules, relay outputs can switch different voltage types without requiring the external load to use the same voltage as the PLC's internal logic supply. The eight outputs are electrically isolated, allowing separate load circuits within the limits of the module's electrical ratings.

Switching Characteristics and Load Protection

The module has an activation response time of 10 ms or less and a deactivation response time of 13 ms or less. These characteristics should be considered when selecting the module for applications involving frequent switching or time-sensitive output sequences.

The permissible switching load depends on voltage, load type, ambient temperature and electrical operating conditions. Inductive loads require particular attention because switching can generate voltage transients across relay contacts.

  • AC inductive loads require an appropriately rated RC circuit or ZNO-type surge limiter across each output channel.
  • DC inductive loads require a discharge diode on each output channel.
  • External fast-blow fuses are required for short-circuit and overload protection.

The minimum switching load is also relevant when controlling low-current signals. Contact operation should be checked against the manufacturer's specified minimum load rather than assuming that the rated voltage range guarantees reliable switching at every current level.

Modicon X80 Platform Integration

The BMXDRA0815 belongs to the Modicon X80 common I/O architecture, which provides a shared hardware environment for Modicon M340 and M580 PLC systems. It can be used in local or remote I/O configurations, subject to the selected PLC architecture and rack arrangement.

The module is installed in an appropriate X80 module rack and secured using two mounting screws. Its field connections use a compatible 20-pin connection arrangement, with cage-clamp, screw-clamp or removable spring-type terminal block options.

Technical Specifications

Parameter Specification
Model BMXDRA0815
Brand Schneider Electric
Product Series Modicon X80
Product Type Discrete Relay Output Module
Number of Outputs 8
Output Type Electromechanical Relay
Contact Configuration 8 Normally Open (NO)
Output Isolation Electrically isolated channels
Discrete Output Logic Positive
Rated AC Voltage 24-240 V AC
Rated DC Voltage 24-125 V DC
Minimum Switching Load 5 V DC / 10 mA
Output Activation Time 10 MOhm at 500 V DC
Dielectric Strength 1780 V AC at 50/60 Hz for 1 min
MTBF 3,200,000 h (product specification)
Operating Temperature 0 to 60 deg C
Relative Humidity 5-95% at 60 deg C, non-condensing
Protection Rating IP20
Protective Coating Standard version
Product Weight 0.169 kg
EAN 3606481275608
Lifecycle Carbon Footprint 157 kg CO2 eq.

Frequently Asked Questions

Q: How many relay outputs does the BMXDRA0815 provide?

A: It provides eight electrically isolated normally open relay outputs. Each channel can switch an external AC or DC load within its specified electrical switching limits.

Q: Can the BMXDRA0815 switch both AC and DC loads?

A: Yes. Its rated voltage ranges are 24-240 V AC and 24-125 V DC. However, permissible switching power and current depend on the load type and operating conditions. Inductive loads require appropriate external suppression components.

Q: Is the BMXDRA0815 compatible with Modicon M340 and M580 PLC systems?

A: Yes. It belongs to the Modicon X80 I/O family and is specified for Modicon M340 and M580 local or remote I/O configurations. The selected rack, connection block and system architecture must support the module.

پرداخت: حواله بانکی، وسترن یونیون.

بندر حمل: شیامن.

زمان آماده‌سازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).

تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال می‌کنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام می‌شود.

پرسش‌های متداول

پرسش‌های متداول درباره قیمت‌ها، ارسال، گارانتی و مرجوعی

در صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.

اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده می‌شوند. بیشتر سفارش‌ها از انبار ما در چین ارسال می‌شوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.

بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال می‌کنیم. هزینه ارسال و زمان حمل‌ونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.

ما معمولاً از خدمات پیک بین‌المللی DHL، FedEx، UPS و سایر شرکت‌ها استفاده می‌کنیم. شرکت حمل‌ونقل را می‌توان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.

محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابل‌اعمال و دستورالعمل‌های بازگشت را تأیید کنید.

Products FAQs

ممکن است این‌ها را هم بپسندید