
وقتی این محصول در دسترس قرار گرفت، از طریق ایمیل اطلاعرسانی شود
- توضیحات
- Reviews
- ارسال و پرداخت
The BMXDDI1602 is a 16-channel, 24 VDC discrete input module in the Schneider Electric Modicon X80 range. It receives signals from 2-wire or 3-wire DC sensors and transfers isolated input states to the PLC system. Positive logic (sink) input operation, channel-level LED indication, reverse-polarity protection and a 4 ms typical response time support its use in distributed and local I/O configurations.
Input Configuration and Signal Processing
The module provides 16 isolated digital input channels operating at 24 VDC. It supports both 2-wire and 3-wire sensor connections, with a nominal input current of 3.5 mA per channel at 24 VDC.
The input thresholds define the voltage levels recognized by the PLC:
- Guaranteed logic 1: at least 11 V.
- Guaranteed logic 0: 5 V or less.
- Guaranteed logic 1 current: 2 mA.
- Guaranteed logic 0 current: 1.5 mA.
The 6.8 kOhm input impedance determines the electrical load presented to connected sensors. Input parallelization is supported, and reverse-polarity protection helps protect the input circuitry against incorrect DC polarity.
Response Time and Diagnostics
The typical DC response time is 4 ms, with a maximum specified response time of 7 ms. These values are relevant when checking input timing against PLC scan requirements and the switching characteristics of connected field devices.
Local diagnostics include a green RUN LED for module operation, a green LED for each input channel, and red ERR and I/O indicators for module and I/O fault indication. The module also provides sensor supply voltage monitoring, with a sensor fault indication below 14 VDC and an OK indication above 18 VDC.
Modicon X80 Platform and Installation
The BMXDDI1602 belongs to the Modicon X80 common I/O platform used with Modicon M340 and M580 PLC architectures, including local and remote I/O configurations. Its 20-pin connection arrangement supports compatible removable screw-clamp, cage-clamp or spring-clamp terminal blocks.
The module is installed in an X80 module rack and secured with two screws. The supplied technical information specifies hot-swapping support. Confirm the applicable rack and system replacement procedures before exchanging a module in an operating installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDI1602 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Discrete Input Module |
| Number of Inputs | 16 isolated digital inputs |
| Input Voltage | 24 VDC |
| Input Logic | Positive logic (sink) |
| Input Current | 3.5 mA at 24 VDC |
| Sensor Supply Voltage | 19-30 VDC |
| Input Wiring | 2-wire or 3-wire |
| Input Impedance | 6,800 Ohm |
| Guaranteed Logic 1 Voltage | >= 11 V |
| Guaranteed Logic 0 Voltage | = 2 mA |
| Guaranteed Logic 0 Current | 10 MOhm at 500 VDC |
| Channel Isolation | 1,500 V for 1 minute |
| Power Dissipation | 2.5 W |
| Hot Swapping | Supported |
| Local Diagnostics | RUN, ERR, I/O and individual channel LEDs |
| Mounting | Modicon X80 module rack |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Operating Altitude | 0-2,000 m; derating required from 2,000 to 5,000 m |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 Gn |
| Dimensions (H x W x D) | 103.7 x 32 x 86 mm |
| Net Weight | 0.115 kg |
| EAN | 3595863910001 |
| Total Lifecycle Carbon Footprint | 32 kg CO2 eq. |
Frequently Asked Questions
Q: Which sensors can be connected to the BMXDDI1602?
A: The module supports 2-wire and 3-wire DC proximity sensors conforming to IEC 60947-5-2. The sensor supply voltage must be within 19-30 VDC, and the input signal must satisfy the specified logic thresholds.
Q: What is the difference between the typical and maximum response times?
A: The typical response time is 4 ms, while the maximum specified response time is 7 ms. The maximum value should be considered when evaluating input detection timing and PLC application requirements.
Q: Can the BMXDDI1602 be replaced while the PLC system is operating?
A: Hot-swapping support is specified for this module. Actual replacement procedures must follow the applicable Modicon X80 rack and controller configuration requirements.
پرداخت: حواله بانکی، وسترن یونیون.
بندر حمل: شیامن.
زمان آمادهسازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).
تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام میشود.
پرسشهای متداول
پرسشهای متداول درباره قیمتها، ارسال، گارانتی و مرجوعیدر صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.
اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده میشوند. بیشتر سفارشها از انبار ما در چین ارسال میشوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.
بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه ارسال و زمان حملونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.
ما معمولاً از خدمات پیک بینالمللی DHL، FedEx، UPS و سایر شرکتها استفاده میکنیم. شرکت حملونقل را میتوان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.
محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابلاعمال و دستورالعملهای بازگشت را تأیید کنید.
ممکن است اینها را هم بپسندید
پستهای وبلاگ
اخبار اتوماسیون صنعتی، راهنماهای فنی و بهروزرسانیهای محصولات.
