پرش به اطلاعات محصول
1 از 3

Schneider Electric BMXDDM16022 Modicon X80 Discrete I/O Module

18 موجود است
  • Manufacturer: Schneider
  • Product No.: BMXDDM16022
  • Country of origin: France
  • Product Type: Modicon X80 Discrete I/O Module
  • Condition: کاملاً نو
  • Payment: حواله تلگرافی، وسترن یونیون
  • Weight: 0.115 kg
  • Shipping port: شیامن
  • Warranty: ۱۲ ماه
  • توضیحات
  • Reviews
  • ارسال و پرداخت

The BMXDDM16022 is a mixed discrete input/output module from the Schneider Electric Modicon X80 platform, designed for Modicon M340 and Modicon M580 automation architectures. It integrates 8 discrete input channels and 8 solid-state discrete output channels operating on 24 VDC positive logic (sink/source). Built with standard non-conformal coating and TC all-climate treatment, the module supports direct rack installation and connects to field devices via a removable 20-pin terminal block.

Technical Specifications

Parameter Specification
Model BMXDDM16022
Brand Schneider Electric
Series Modicon X80
Product Type Discrete I/O Module
Discrete Inputs 8 channels, 24 VDC positive logic (EN 61131-2 Type 3)
Input Impedance 6800 Ohm
Input Voltage Thresholds Greater than 18 VDC (state 1 / sensor OK); less than 14 VDC (state 0 / fault)
Input Response Time 4 ms typical, 7 ms maximum
Discrete Outputs 8 channels, solid-state, 24 VDC positive logic
Output Current 0.5 A nominal, 0.625 A max per channel; 5 A max per module
Output Response Time 1.2 ms
Output Voltage Drop Less than 1.2 V at state 1
Resistive Load Impedance Greater than or equal to 48 Ohm
Output Paralleling Yes, maximum 2 outputs
Switching Frequency 0.5 / LI^2 Hz
Maximum Overload Time 15 ms
Current Consumption Less than or equal to 111 mA at 3.3 VDC; less than or equal to 67 mA at 24 VDC
Dielectric Strength 1500 VAC at 50/60 Hz for 1 min (output/ground, output/internal logic, primary/secondary); 500 VDC for 1 min (between input and output groups)
Insulation Resistance Greater than 10 MOhm at 500 VDC
Protection Features Reverse polarity protection (blocking diode) on input and output; output overvoltage protection; requires external 0.5 A fast-blow fuse per input channel group
Operating Temperature 0 deg C to 60 deg C (32 deg F to 140 deg F)
Relative Humidity 5 to 95 % at 55 deg C without condensation
Protection Rating IP20
Coating Standard version (non-conformal)
Environmental Treatment TC (treatment for all climates)
Weight 0.115 kg
Packaged Dimensions 5.5 cm x 11.0 cm x 11.7 cm
Certifications & Standards CE, UL, CSA, RCM, EAC, UKCA, Merchant Marine; EN 61000-6-5, EN 61850-3, EN 61131-2 Type 3
EAN 3595863910506

Signal Conditioning and Protection

The 8 input channels conform to EN 61131-2 Type 3 characteristics, switching reliably above 18 VDC and registering an off or fault state below 14 VDC. Reverse polarity protection via blocking diodes safeguards both input and output circuits against wiring errors, while input groups require an external 0.5 A fast-blow fuse.

On the output side, solid-state transistors deliver up to 0.5 A nominal (0.625 A maximum) per channel with built-in overvoltage protection. Up to two outputs can be wired in parallel to drive higher-current loads, provided total module load current stays within the 5 A limit.

Compatibility and Installation

The BMXDDM16022 operates across Modicon M340 and Modicon M580 PLC systems in both local and remote I/O racks. It mounts directly into a Modicon X80 backplane slot and is secured with two mounting screws.

Field wiring requires a separately ordered 20-pin removable terminal block—such as screw clamp (BMXFTB2000 / BMXFTB2010) or spring clamp (BMXFTB2020)—or pre-wired 20-way cable sets (BMXFTW301, BMXFTW501, BMXFTW1001).

Frequently Asked Questions

Q: Does the BMXDDM16022 include a terminal block in the box?A: No. The module requires a compatible 20-pin removable terminal block (such as BMXFTB2000, BMXFTB2010, or BMXFTB2020) or pre-wired cable harness, which must be ordered separately.

Q: What is the difference between the standard BMXDDM16022 and the conformal-coated version?A: The BMXDDM16022 is the standard non-conformal coated version rated for 0 deg C to 60 deg C with TC climate treatment. Applications requiring conformal coating for harsh or corrosive atmospheres use the hardened variant (BMXDDM16022H).

Q: Can outputs on the BMXDDM16022 be connected in parallel?A: Yes, up to 2 discrete output channels can be connected in parallel, provided the total current across all outputs on the module does not exceed 5 A.

پرداخت: حواله بانکی، وسترن یونیون.

بندر حمل: شیامن.

زمان آماده‌سازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).

تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال می‌کنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام می‌شود.

پرسش‌های متداول

پرسش‌های متداول درباره قیمت‌ها، ارسال، گارانتی و مرجوعی

در صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.

اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده می‌شوند. بیشتر سفارش‌ها از انبار ما در چین ارسال می‌شوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.

بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال می‌کنیم. هزینه ارسال و زمان حمل‌ونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.

ما معمولاً از خدمات پیک بین‌المللی DHL، FedEx، UPS و سایر شرکت‌ها استفاده می‌کنیم. شرکت حمل‌ونقل را می‌توان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.

محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابل‌اعمال و دستورالعمل‌های بازگشت را تأیید کنید.

Products FAQs

ممکن است این‌ها را هم بپسندید