
وقتی این محصول در دسترس قرار گرفت، از طریق ایمیل اطلاعرسانی شود
- توضیحات
- Reviews
- ارسال و پرداخت
The BMXDDM3202K is a 24 VDC discrete mixed input/output module in the Schneider Electric Modicon X80 platform. It combines 16 positive-logic (sink) discrete inputs and 16 positive-logic (source) solid-state outputs within a single rack slot, using a 40-pin front connector for high-density field wiring in Modicon M340 and M580 automation architectures.
Channel Configuration and Electrical Characteristics
The input section meets IEC/EN 61131-2 Type 3 requirements with a 9600 Ohm input impedance, a typical response time of 4 ms (7 ms maximum), and sensor voltage supervision that flags faults below 14 VDC and confirms normal status above 18 VDC.
The output section provides 16 solid-state channels rated at 0.1 A nominal per channel (0.125 A maximum per channel, 3.2 A maximum per module) with a 1.2 ms output response time and a maximum voltage drop below 1.5 V in State 1. Up to 3 outputs can be connected in parallel to drive higher-current loads, and each output channel integrates reverse polarity and overvoltage protection.
System Compatibility and Mounting
The module operates across Modicon M340 and Modicon M580 PLC systems in both local racks and remote I/O drops. It draws up to 166 mA from the 3.3 VDC backplane bus and up to 104 mA at 24 VDC.
This standard-version unit features IP20 ingress protection and TC (all-climate) treatment for operation from 0 deg C to 60 deg C. Field signals connect via a 40-pin removable terminal block or pre-wired cordsets such as the BMXFCW503 paired with Modicon ABE7 Telefast sub-bases. The module installs directly into a Modicon X80 rack and secures with two captive mounting screws.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM3202K |
| Brand | Schneider Electric |
| Series | Modicon X80 |
| Product Type | Discrete Mixed I/O Module |
| Discrete Inputs | 16 channels, 24 VDC, positive logic (IEC/EN 61131-2 Type 3) |
| Input Impedance | 9600 Ohm |
| Input Response Time | 4 ms typical, 7 ms maximum |
| Sensor Voltage Detection Threshold | Less than 14 VDC fault; greater than 18 VDC OK |
| Discrete Outputs | 16 channels, 24 VDC, positive logic solid-state |
| Rated Output Current | 0.1 A per channel (0.125 A max per channel, 3.2 A max per module) |
| Output Response Time | 1.2 ms |
| Output Voltage Drop | Less than 1.5 V in State 1 |
| Output Paralleling | Yes, maximum 3 outputs |
| Resistive Load Impedance | Less than or equal to 220 Ohm |
| Maximum Overload Time | 15 ms |
| Switching Frequency | 0.5 / LI^2 Hz |
| Protection Features | Reverse polarity protection (input and output), output overvoltage protection, external 0.5 A fast-blow fuse per input group |
| Current Consumption | Less than or equal to 104 mA at 24 VDC; less than or equal to 166 mA at 3.3 VDC |
| Dielectric Strength | 1500 VAC at 50/60 Hz for 1 min (output/ground, output/internal logic, primary/secondary); 500 VDC for 1 min (between input and output groups) |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Front Connector | 40-pin connector |
| Ambient Operating Temperature | 0 deg C to 60 deg C |
| Relative Humidity | 5% to 95% at 55 deg C, non-condensing |
| Degree of Protection | IP20 |
| Coating | Standard version (TC all-climate treatment) |
| MTBF | 429,248 hours (430,000 hours nominal) |
| Weight | 0.11 kg |
| Certifications and Standards | CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy; EN 61131-2 Type 3, EN 61000-6-5, EN 61850-3 |
Frequently Asked Questions
Q: How does the BMXDDM3202K differ from the BMXDDM3202KH?A: The BMXDDM3202K is the standard-coated version rated for 0 deg C to 60 deg C, whereas the "H" suffix variants in the Modicon X80 family add conformal coating and extended temperature ratings for harsh environments.
Q: Can outputs on the BMXDDM3202K be wired in parallel for higher load current?A: Yes, up to 3 output channels can be connected in parallel on this module to increase current capacity, provided the total module current does not exceed 3.2 A.
Q: What wiring accessories are required to connect field devices to this 40-pin module?A: The module uses a 40-pin front interface and requires a compatible 40-pin removable terminal block or pre-wired cordsets (such as BMXFCW503) connected to Modicon ABE7 Telefast wiring bases.
پرداخت: حواله بانکی، وسترن یونیون.
بندر حمل: شیامن.
زمان آمادهسازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).
تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام میشود.
پرسشهای متداول
پرسشهای متداول درباره قیمتها، ارسال، گارانتی و مرجوعیدر صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.
اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده میشوند. بیشتر سفارشها از انبار ما در چین ارسال میشوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.
بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال میکنیم. هزینه ارسال و زمان حملونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.
ما معمولاً از خدمات پیک بینالمللی DHL، FedEx، UPS و سایر شرکتها استفاده میکنیم. شرکت حملونقل را میتوان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.
محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابلاعمال و دستورالعملهای بازگشت را تأیید کنید.
ممکن است اینها را هم بپسندید
پستهای وبلاگ
اخبار اتوماسیون صنعتی، راهنماهای فنی و بهروزرسانیهای محصولات.
