پرش به اطلاعات محصول
1 از 3

Schneider Electric BMXDDO6402K Modicon X80 Discrete Output Module

18 موجود است
  • Manufacturer: Schneider
  • Product No.: BMXDDO6402K
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Output Module
  • Condition: کاملاً نو
  • Payment: حواله تلگرافی، وسترن یونیون
  • Weight: 0.15 kg
  • Shipping port: شیامن
  • Warranty: ۱۲ ماه
  • توضیحات
  • Reviews
  • ارسال و پرداخت

The Schneider Electric BMXDDO6402K is a 64-channel discrete transistor output module in the Modicon X80 range. It operates with a 24 VDC output supply and uses positive output logic. The module provides individual channel control, output status detection thresholds, and protection against reverse polarity, external short circuits, overloads, and overvoltage.

Output Configuration and Operation

The BMXDDO6402K provides 64 transistor output channels for controlling external actuators and other discrete loads. Its positive output logic determines the output switching arrangement. The specified output response time is 1.2 ms, which defines the delay between an output command and the corresponding output response.

The module supports output paralleling, with a maximum of three outputs. This configuration must follow the manufacturer's channel and load restrictions. The specified switching frequency is expressed as 0.5/LI² Hz, so the applicable load inductance and current conditions should be checked before selecting a switching rate.

Electrical Protection and Diagnostics

The output circuits include reverse-polarity, external short-circuit, overload, and overvoltage protection. An external fuse is also specified as part of the protection arrangement. These functions address electrical faults that can occur in field wiring and connected loads.

The module provides voltage detection thresholds for preactuator fault monitoring. A voltage below 14 VDC indicates a preactuator fault, while a voltage above 18 VDC is specified for preactuator detection at state 0. These thresholds are relevant when checking output-side voltage conditions during troubleshooting.

Technical Specifications

Parameter Specification
Model BMXDDO6402K
Brand Schneider Electric
Product Range Modicon X80
Product Type Discrete Transistor Output Module
Number of Outputs 64
Output Technology Solid-state transistor
Output Logic Positive
Rated Output Voltage 24 VDC
Output Voltage Range 19-30 VDC
Rated Current per Channel 0.1 A
Maximum Current per Module 6.4 A
Output Response Time 1.2 ms
Maximum Parallel Outputs 3
Maximum Overload Duration 15 ms
Switching Frequency 0.5/LI² Hz
Minimum Ohmic Load Impedance 220 Ohm
Voltage Detection Threshold Below 14 VDC: preactuator fault; above 18 VDC: preactuator at state 0
Insulation Resistance Greater than 10 MOhm at 500 VDC
Dielectric Strength 1500 VAC, 50/60 Hz, 1 min (output/ground and output/internal logic); 500 VDC, 1 min (between channel groups)
Protection Reverse polarity, short circuit, overload and overvoltage
Required External Fuse 2 A fast-blow fuse per 16-channel group
IP Rating IP20
Protective Treatment Standard version
MTBF 150,000 hours
Net Weight 0.15 kg
Country of Origin USA
GTIN 3595863910490

System Integration

The BMXDDO6402K belongs to the Modicon X80 common I/O platform, which is used with Modicon M340 and M580 programmable automation controllers. Its 64-channel configuration provides a high-density discrete output interface for rack-based control systems.

The module uses two 40-pin connectors for field output connections. The 64 channels are arranged in four groups of 16, with an external 2 A fast-blow fuse specified for each group. This grouping is important when planning field wiring and fault isolation.

Frequently Asked Questions

Q: What is the rated output current of the BMXDDO6402K?

A: The rated output current is 0.1 A per channel, with a maximum aggregate module current of 6.4 A. The total load must remain within the module limit even when multiple channels operate simultaneously.

Q: Can the BMXDDO6402K drive inductive loads?

A: The module supports transistor output switching, but the permissible switching frequency depends on load inductance and current. The specified frequency relationship is 0.5/LI² Hz. Check the load characteristics and manufacturer's switching limits before application.

Q: What external protection is required?

A: A 2 A fast-blow fuse is specified for each 16-channel group. The module also incorporates electronic overload, short-circuit, reverse-polarity and overvoltage protection.

پرداخت: حواله بانکی، وسترن یونیون.

بندر حمل: شیامن.

زمان آماده‌سازی: معمولاً ۱ تا ۳ روز کاری پس از تأیید پرداخت (مشروط به موجودی).

تحویل در سراسر جهان: قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال می‌کنیم. هزینه حمل با درخواست استعلام قیمت شما اعلام می‌شود.

پرسش‌های متداول

پرسش‌های متداول درباره قیمت‌ها، ارسال، گارانتی و مرجوعی

در صفحهٔ محصول روی درخواست قیمت کلیک کنید و شمارهٔ قطعه، مقدار موردنیاز و کشور مقصد را برای ما ارسال کنید. تیم فروش ما دربارهٔ موجودی فعلی، قیمت و زمان تقریبی تحویل پاسخ خواهد داد.

اقلام موجود معمولاً پس از پرداخت و تأیید سفارش آماده می‌شوند. بیشتر سفارش‌ها از انبار ما در چین ارسال می‌شوند، هرچند محل ارسال ممکن است بسته به موجودی فعلی متفاوت باشد.

بله. قطعات اتوماسیون صنعتی را برای مشتریان سراسر جهان ارسال می‌کنیم. هزینه ارسال و زمان حمل‌ونقل به مقصد، وزن بسته، اندازه محصول و الزامات واردات محلی بستگی دارد.

ما معمولاً از خدمات پیک بین‌المللی DHL، FedEx، UPS و سایر شرکت‌ها استفاده می‌کنیم. شرکت حمل‌ونقل را می‌توان بر اساس مقصد، سرعت تحویل، اندازه محموله و نیازهای مشتری انتخاب کرد.

محصولات ما معمولاً شامل ضمانت ۱۲ماهه هستند. محصولات واجد شرایط همچنین ممکن است طبق سیاست بازپرداخت ۳۰روزه قابل بازگشت باشند. لطفاً پیش از بازگرداندن هر کالا با تیم ما تماس بگیرید تا شرایط قابل‌اعمال و دستورالعمل‌های بازگشت را تأیید کنید.

Products FAQs

ممکن است این‌ها را هم بپسندید