
Notification par e-mail lorsque ce produit sera disponible
- Description
- Reviews
- Livraison et paiement
The BMXDDM16025 is a mixed digital input/output module in Schneider Electric's Modicon X80 platform. It combines 24 VDC discrete input channels with relay output channels for interfacing field signals and switching external loads. The module provides 8 relay outputs rated for switching AC or DC circuits, with a 20-pin removable terminal block connection option and IP20 protection.
Functional Overview
The BMXDDM16025 handles discrete signal acquisition and relay-based output switching within a Modicon automation system. Its input circuits monitor 24 VDC field signals, while the relay outputs provide electrically switched contacts for controlling external devices.
The relay output arrangement allows the controller to switch loads supplied from separate external circuits rather than limiting output operation to the module's 24 VDC input supply. Output supply voltage and load conditions must be checked against the applicable relay ratings.
Digital Inputs and Relay Outputs
The input section uses 24 VDC discrete signal circuits with an input impedance of 6,800 Ohm. The input voltage detection thresholds distinguish sensor states: below 14 VDC is identified as a sensor fault, while above 18 VDC is identified as sensor OK.
The output section uses electromechanical relays. Its response time is specified as no more than 10 ms for activation and 8 ms for deactivation. The maximum switching voltage is specified as 264 VAC or 125 VDC. These switching limits should be considered separately from the field supply voltage and the permitted load current.
Signal Protection and Electrical Isolation
The module specifies an input protection arrangement with one external 0.5 A fast-acting fuse per input channel group. Separate external fast-acting fuse protection is specified for output channels or channel groups.
Electrical isolation specifications include more than 10 MOhm insulation resistance at 500 VDC. Dielectric strength is specified at 1,500 VAC for 1 minute between primary and secondary circuits, 2,830 VAC for 1 minute across relay outputs, and 500 VDC for 1 minute between I/O groups.
Modicon X80 Platform Integration
The BMXDDM16025 belongs to the Modicon X80 I/O platform, which provides a common hardware environment for Modicon M340 and M580 automation architectures. The module is specified for local or remote I/O configurations, subject to the applicable PLC, rack and hardware configuration.
The module is installed on a compatible module carrier and secured with two screws. A 20-pin cage-clamp, screw-clamp or removable spring-clamp terminal block is specified as the connection option. Verify the terminal block reference and rack configuration before installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM16025 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Mixed Digital I/O Relay Module |
| Digital Input Voltage | 24 VDC |
| Digital Input Impedance | 6,800 Ohm |
| Digital Input Channels | 8 channels (product page listing; see editorial note) |
| Digital Output Channels | 8 |
| Digital Output Type | Relay |
| Output Switching Voltage | 24-240 VAC (product designation) |
| Maximum Switching Voltage | 264 VAC / 125 VDC |
| Minimum Switching Current | 1 mA at 5 VDC |
| Output Response Time | 18 VDC: sensor OK |
| Insulation Resistance | > 10 MOhm at 500 VDC |
| Input Protection | One external 0.5 A fast-acting fuse per input channel group |
| Output Protection | External fast-acting fuse per output channel or channel group |
| Dielectric Strength | 1,500 VAC, 50/60 Hz, 1 min, primary/secondary |
| Relay Output Dielectric Strength | 2,830 VAC, 50/60 Hz, 1 min |
| I/O Group Isolation | 500 VDC, 1 min |
| Mounting | Modicon X80 module carrier, secured with 2 screws |
| Connection | 20-pin removable terminal block |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Climatic Treatment | TC |
| MTBF | Approximately 940,000 hours |
| Protective Coating | Standard version |
| Weight | 0.135 kg |
| EAN | 3595863910612 |
| Lifecycle Carbon Footprint | 27 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between the BMXDDM16025 and a transistor output module?
A: The BMXDDM16025 uses relay contacts for its discrete outputs, whereas transistor output modules use semiconductor switching. Relay outputs support specified AC and DC switching circuits, but their mechanical switching frequency and response characteristics differ from solid-state outputs.
Q: Can the relay outputs switch AC and DC loads?
A: Yes. The specified maximum switching voltages are 264 VAC and 125 VDC. The actual permissible load current depends on the applicable relay load ratings and operating conditions; the maximum voltage alone does not establish a 3 A rating for every load type.
Q: What should be checked before replacing an existing BMXDDM16025?
A: Verify the input channel count, relay output configuration, terminal block arrangement, external supply requirements and rack compatibility. Also check the controller's local or remote I/O configuration to ensure that the replacement matches the existing installation.
Paiement : virement bancaire, Western Union.
Port d’expédition : Xiamen.
Délai : généralement 1 à 3 jours ouvrés après confirmation du paiement (sous réserve des stocks).
Livraison dans le monde entier : nous expédions des pièces d’automatisation industrielle à des clients du monde entier. Les frais de transport sont indiqués avec votre demande de devis.
Foire aux questions (FAQ)
Questions fréquentes sur les devis, l’expédition, la garantie et les retoursCliquez sur Demander un devis sur la page du produit et envoyez-nous la référence, la quantité souhaitée et le pays de destination. Notre équipe commerciale vous répondra avec les disponibilités actuelles, le prix et le délai de livraison estimé.
Les articles en stock sont généralement préparés après le paiement et la confirmation de la commande. La plupart des commandes sont expédiées depuis notre entrepôt en Chine, bien que le lieu d’expédition puisse varier en fonction des stocks disponibles.
Oui. Nous expédions des pièces d’automatisation industrielle à des clients partout dans le monde. Les frais d’expédition et le délai de transport dépendent de la destination, du poids du colis, de la taille du produit et des exigences locales en matière d’importation.
Nous utilisons généralement DHL, FedEx, UPS et d’autres services de messagerie internationaux. Le transporteur peut être choisi en fonction de la destination, de la rapidité de livraison, de la taille de l’envoi et des exigences du client.
Nos produits sont généralement couverts par une garantie de 12 mois. Les produits admissibles peuvent également être retournés conformément à notre politique de remboursement sous 30 jours. Veuillez contacter notre équipe avant de retourner tout article afin de confirmer les conditions applicables et les instructions de retour.
Vous aimerez peut-être aussi
Articles de blog
Actualités sur l’automatisation industrielle, guides techniques et mises à jour des produits.
