Accéder aux informations sur le produit
1 de 3

Schneider BMXDRA1605 Modicon X80 Discrete Relay Output Module

18 en stock
  • Manufacturer: Schneider
  • Product No.: BMXDRA1605
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Relay Output Module
  • Condition: Tout neuf
  • Payment: Virement télégraphique, Western Union
  • Weight: 0.15 kg
  • Shipping port: Xiamen
  • Warranty: 12 mois
  • Description
  • Reviews
  • Livraison et paiement

The Schneider Electric BMXDRA1605 is a 16-channel discrete relay output module in the Modicon X80 series. It provides normally open (NO) relay contacts for switching external AC or DC loads, with a specified switching capacity of 3 A. The module supports 24-240 V AC and 24-48 V DC applications and is designed for integration into Modicon M340 and M580 automation platforms.

Output Function and Configuration

The BMXDRA1605 uses electromechanical relay contacts to switch external loads according to output commands from the PLC. Its 16 normally open outputs remain open when de-energized and close when the corresponding output relay is activated.

The AC and DC voltage ranges allow the module to control different types of field circuits. The minimum switching current is 1 mA at 5 V DC, which is relevant when evaluating low-current loads. The specified output response times are less than 8 ms for activation and 10 ms for deactivation.

Platform Compatibility and Mounting

The module belongs to the Modicon X80 I/O platform, which provides a common module architecture for Modicon M340 and M580 PLC systems, including local and remote I/O configurations. It is installed in a compatible module rack and secured with two screws.

The connection is made through a 20-pin removable terminal block. The source identifies cage-clamp, screw-clamp and removable spring-terminal block options. The terminal block and associated wiring should be selected according to the cabinet configuration and field wiring requirements.

Electrical Isolation and Environmental Conditions

The module has an insulation resistance greater than 10 MOhm at 500 V DC and a dielectric withstand rating of 2000 V AC at 50/60 Hz for 1 minute. These specifications describe its insulation characteristics and should be considered when checking the separation requirements between control and field circuits.

The BMXDRA1605 has an IP20 protection rating and supports operation from 0 to 60 deg C. Relative humidity is specified as 5-95% at 55 deg C, without condensation. Its reported MTBF is approximately 2.1 million hours.

Technical Specifications

Parameter Specification
Model BMXDRA1605
Brand Schneider Electric
Series Modicon X80
Product Type Discrete Relay Output Module
Number of Outputs 16
Output Type Normally Open (NO) Relay Contacts
Switching Voltage 24-240 V AC / 24-48 V DC
Switching Current 3 A
Minimum Switching Current 1 mA at 5 V DC
Output Response Time - Activation Less than 8 ms
Output Response Time - Deactivation 10 ms
Discrete Output Logic Positive
Insulation Resistance Greater than 10 MOhm at 500 V DC
Dielectric Withstand Voltage 2000 V AC at 50/60 Hz for 1 min
MTBF Approximately 2,100,000 h
Mounting Modicon X80 Module Rack; secured with 2 screws
Connection 20-pin removable terminal block
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Coating Standard version
Product Weight 0.15 kg
EAN 3595863909234
Environmental Carbon Footprint 146 kg CO2 eq.

Frequently Asked Questions

Q: How many relay outputs does the BMXDRA1605 provide?

A: It provides 16 normally open relay outputs. Each output switches an external circuit in response to its corresponding PLC output command.

Q: Can the BMXDRA1605 switch both AC and DC loads?

A: Yes. The specified switching voltage ranges are 24-240 V AC and 24-48 V DC, with a rated switching current of 3 A. The actual load must also comply with the applicable contact ratings and switching conditions.

Q: Which PLC platforms support the BMXDRA1605?

A: The module is specified for Modicon M340 and Modicon M580 PLC platforms, including local and remote I/O configurations. A compatible Modicon X80 rack and 20-pin terminal block are required.

Output Protection and Switching Limits

For inductive loads, the external circuit requires suitable suppression to limit switching overvoltage. Schneider's technical documentation specifies discharge diodes for DC outputs and RC circuits or ZNO surge limiters for AC outputs.

The manufacturer's product datasheet specifies a conventional free-air thermal current (Ith) of 2 A. It also provides load-dependent electrical durability ratings under AC-12, AC-15, DC-12 and DC-13 utilization categories. These ratings should be checked against the actual load rather than treating the 3 A figure in the product listing as a universal continuous switching rating.

Paiement : virement bancaire, Western Union.

Port d’expédition : Xiamen.

Délai : généralement 1 à 3 jours ouvrés après confirmation du paiement (sous réserve des stocks).

Livraison dans le monde entier : nous expédions des pièces d’automatisation industrielle à des clients du monde entier. Les frais de transport sont indiqués avec votre demande de devis.

Foire aux questions (FAQ)

Questions fréquentes sur les devis, l’expédition, la garantie et les retours

Cliquez sur Demander un devis sur la page du produit et envoyez-nous la référence, la quantité souhaitée et le pays de destination. Notre équipe commerciale vous répondra avec les disponibilités actuelles, le prix et le délai de livraison estimé.

Les articles en stock sont généralement préparés après le paiement et la confirmation de la commande. La plupart des commandes sont expédiées depuis notre entrepôt en Chine, bien que le lieu d’expédition puisse varier en fonction des stocks disponibles.

Oui. Nous expédions des pièces d’automatisation industrielle à des clients partout dans le monde. Les frais d’expédition et le délai de transport dépendent de la destination, du poids du colis, de la taille du produit et des exigences locales en matière d’importation.

Nous utilisons généralement DHL, FedEx, UPS et d’autres services de messagerie internationaux. Le transporteur peut être choisi en fonction de la destination, de la rapidité de livraison, de la taille de l’envoi et des exigences du client.

Nos produits sont généralement couverts par une garantie de 12 mois. Les produits admissibles peuvent également être retournés conformément à notre politique de remboursement sous 30 jours. Veuillez contacter notre équipe avant de retourner tout article afin de confirmer les conditions applicables et les instructions de retour.

Products FAQs

Vous aimerez peut-être aussi