Galerie multimédia
Galerie multimédia
Galerie multimédia

Schneider Electric BMXAMO0802H Modicon X80 Analog Output Module

18 en stock

Manufacturer: Schneider
Product No.: BMXAMO0802H
Country of origin: France
Product Type: Modicon X80 Analog Output Module
Condition: Tout neuf
Payment: Virement télégraphique, Western Union
Weight: 0.15 kg
Shipping port: Xiamen
Warranty: 12 mois

Description
Reviews
Livraison et paiement

Configured for analog current signal generation in Modicon X80 I/O architectures, the Schneider Electric BMXAMO0802H (BMXAMO0802H analog output module) provides 8 non-isolated 0-20 mA or 4-20 mA output channels through the rack power and backplane interface. The module provides 16-bit resolution, conversion time of <= 4 ms, and configurable fallback behavior.

Hardware Specifications

Parameter	Specification
Model	BMXAMO0802H
Brand	Schneider Electric
Series	Modicon X80
Product Type	Analog output module
Output Channels	8
Output Signal	0-20 mA, 4-20 mA
Output Type	Current
Output Resolution	16 bits
Channel Isolation	Non-isolated
Load Impedance	<= 350 Ohm
Conversion Time	<= 4 ms
Measurement Error	<= 0.45% of full scale from -25 to 70 deg C; 0.1% of full scale at 25 deg C
Temperature Drift	45 ppm/deg C for 0-20 mA and 4-20 mA
Minimum Crosstalk Attenuation	80 dB
Common Mode Rejection	80 dB
Isolation Voltage	1400 VDC between channels and ground; 1400 VDC between channels and bus
Supply	Internal power supply via rack
Power Consumption	3.6 W at 24 VDC typical; 3.9 W at 24 VDC maximum
Current Consumption	150 mA at 3.3 VDC; 135 mA at 24 VDC
Operating Temp	-25 to 70 deg C
Storage Temp	-40 to 85 deg C
Relative Humidity	5 to 95% at 55 deg C, non-condensing
IP Rating	IP20
Vibration Resistance	3 gn
Shock Resistance	30 gn
Dimensions	32 x 100 x 86 mm
Weight	0.15 kg
Mounting	Modicon X80 rack, fixed with 2 screws
Electrical Connection	20-way connector
Status Indication	RUN, channel diagnostic, ERR, I/O LEDs
Protective Treatment	Conformal coating
Origin	US
Certifications	CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy, ATEX, IECEx
Standards	IEC 61131-2, IEC 61000-6-4, IEC 61000-6-2, EN 61010-2-201
Compatible Controllers	Modicon M340 and Modicon M580 local or remote I/O

Modicon X80 Backplane and Analog Signal Characteristics

The BMXAMO0802H receives its internal supply through the Modicon X80 rack and exchanges I/O data through the rack backplane. The eight output channels generate either 0-20 mA or 4-20 mA current signals with 16-bit resolution. Each channel is non-isolated from the other output channels at the signal interface.

The specified load impedance is <= 350 Ohm for both current ranges. The module provides a minimum 80 dB crosstalk attenuation and 80 dB common mode rejection. Open-circuit detection applies to the 4-20 mA range, while short-circuit detection applies to the 0-20 mA range. Output conversion time is <= 4 ms.

The H suffix identifies the ruggedized version with conformal coating and an extended operating range of -25 to 70 deg C. The module is intended for installation in compatible Modicon X80 racks used with Modicon M340 and M580 controllers.

Frequently Asked Questions

Q: Is the BMXAMO0802H output channel interface isolated?

A: No. The eight analog output channels are specified as non-isolated. The module nevertheless specifies 1400 VDC isolation between channels and ground and between channels and the bus.

Q: What current ranges can the BMXAMO0802H generate?

A: Each analog output supports 0-20 mA and 4-20 mA current operation. The maximum conversion value is specified as 0-21 mA for both configured ranges.

Q: How is the module powered in an X80 system?

A: The module receives its internal power through the Modicon X80 rack. Specified consumption is 3.6 W typical and 3.9 W maximum at 24 VDC.

Field Installation Guidelines

Install the BMXAMO0802H on the designated Modicon X80 rack position and secure the module with the specified two mounting screws. Verify that the rack and removable 20-way terminal connection are correctly seated before energizing the system.

Route analog current wiring separately from high-voltage power conductors and high-current switching circuits where practical. Use appropriate shielded instrumentation cable when required by the installation environment. Terminate cable shields according to the plant grounding scheme and avoid creating unintended ground loops.

Verify that each connected load remains within the specified <= 350 Ohm impedance. For 4-20 mA circuits, check loop continuity before enabling the output. Confirm channel configuration, fallback behavior, and output range in the controller configuration before placing the channel into service.

The BMXAMO0802H is IP20 and is intended for installation inside a suitable enclosure. The conformal-coated H version supports the specified -25 to 70 deg C operating range and environmental resistance characteristics stated by the manufacturer.

Paiement : virement bancaire, Western Union.

Port d’expédition : Xiamen.

Délai : généralement 1 à 3 jours ouvrés après confirmation du paiement (sous réserve des stocks).

Livraison dans le monde entier : nous expédions des pièces d’automatisation industrielle à des clients du monde entier. Les frais de transport sont indiqués avec votre demande de devis.

Foire aux questions (FAQ)

Questions fréquentes sur les devis, l’expédition, la garantie et les retours

Cliquez sur Demander un devis sur la page du produit et envoyez-nous la référence, la quantité souhaitée et le pays de destination. Notre équipe commerciale vous répondra avec les disponibilités actuelles, le prix et le délai de livraison estimé.

Les articles en stock sont généralement préparés après le paiement et la confirmation de la commande. La plupart des commandes sont expédiées depuis notre entrepôt en Chine, bien que le lieu d’expédition puisse varier en fonction des stocks disponibles.

Oui. Nous expédions des pièces d’automatisation industrielle à des clients partout dans le monde. Les frais d’expédition et le délai de transport dépendent de la destination, du poids du colis, de la taille du produit et des exigences locales en matière d’importation.

Nous utilisons généralement DHL, FedEx, UPS et d’autres services de messagerie internationaux. Le transporteur peut être choisi en fonction de la destination, de la rapidité de livraison, de la taille de l’envoi et des exigences du client.

Nos produits sont généralement couverts par une garantie de 12 mois. Les produits admissibles peuvent également être retournés conformément à notre politique de remboursement sous 30 jours. Veuillez contacter notre équipe avant de retourner tout article afin de confirmer les conditions applicables et les instructions de retour.