Accéder aux informations sur le produit
1 de 3

Schneider Electric BMXEHC0200 Modicon X80 High-Speed Counter Module

18 en stock
  • Manufacturer: Schneider
  • Product No.: BMXEHC0200
  • Country of origin: France
  • Product Type: Modicon X80 High-Speed Counter Module
  • Condition: Tout neuf
  • Payment: Virement télégraphique, Western Union
  • Weight: 0.112 kg
  • Shipping port: Xiamen
  • Warranty: 12 mois
  • Description
  • Reviews
  • Livraison et paiement

The Schneider Electric BMXEHC0200 is a two-channel high-speed counter module for the Modicon automation platform. It processes pulse signals from incremental encoders and 2-wire or 3-wire proximity sensors, with a maximum counting frequency of 60 kHz. The module provides six inputs and two 24 V DC outputs, supporting multiple counting and measurement functions, including frequency measurement, pulse-width modulation and 32-bit counting.

Counting Channels and Input Configuration

The BMXEHC0200 provides two independent high-speed counting channels, with six inputs divided into three high-speed inputs and three auxiliary inputs. This configuration allows the module to receive encoder or proximity sensor signals and use auxiliary signals for counting control and synchronization functions.

Supported input devices include:

  • 2-wire and 3-wire proximity sensors operating at 19.2-30 V DC.
  • Incremental encoders with 10-30 V DC push-pull outputs.
  • 24 V DC Type 3 input signals.

The maximum counting frequency is 60 kHz. The module has a 1 ms cycle time, while the actual measurement limits depend on the selected counting mode and input signal characteristics.

Counting and Measurement Functions

The module supports several operating modes for processing pulse signals and calculating process values:

  • Loop (modulo) counting for cyclic counting within a configured range.
  • Up-counting and down-counting.
  • 32-bit event counting.
  • Frequency measurement for pulse-based speed or rate monitoring.
  • Ratio measurement between two input signals.
  • Time-period measurement.
  • Pulse-width modulation (PWM).
  • Event counting.

These functions allow the PLC application to process pulse information directly through the counting module rather than relying entirely on standard cyclic input processing. The appropriate operating mode and input configuration must be selected according to the signal source and measurement requirements.

24 V DC Outputs and Electrical Protection

The BMXEHC0200 has two 24 V DC outputs with configurable positive or negative logic. Each output supports a maximum current of 0.5 A, with a maximum combined module output current of 2 A specified in the product data.

The outputs include integrated overload and short-circuit protection. The specified maximum leakage current in the OFF state is 0.1 mA, and the maximum voltage drop in the ON state is less than 3 V.

The module also provides sensor power distribution with short-circuit and overload protection. When planning the installation, the sensor supply requirements and connected output loads should be checked against the module's electrical limits.

Electrical and Mechanical Specifications

The module operates with a 24 V DC sensor and I/O configuration. Its backplane power consumption is specified as 200 mA on the 3.3 V bus and 40 mA on the 24 V rack bus. The sensor supply current is specified separately as 80 mA in the supplied product data.

The module provides 1500 V isolation for 60 seconds according to the product specification. Its IP20 enclosure protects the internal electronics against contact with solid objects within the protection rating; it does not provide protection against water ingress.

For installation, the module is fitted into the appropriate rack position and secured using two screws.

Technical Specifications

Parameter Specification
Model BMXEHC0200
Brand Schneider Electric
Product Range Modicon X80
Product Type High-Speed Counter Module
Automation Platform Modicon M340
Number of Channels 2
Maximum Counting Frequency 60 kHz
Number of Inputs 6
High-Speed Inputs 3
Auxiliary Inputs 3
Input Voltage 24 V DC Type 3
Input Compatibility 19.2-30 V DC, 2-wire/3-wire proximity sensors
Encoder Compatibility 10-30 V DC incremental encoders with push-pull outputs
Number of Outputs 2
Output Voltage 24 V DC
Maximum Output Current 0.5 A per output
Maximum Module Output Current 2 A
Output Logic Positive or negative, configurable
Maximum Leakage Current 0.1 mA in OFF state
Maximum Voltage Drop Less than 3 V in ON state
Output Protection Integrated overload and short-circuit protection
Counter Functions Modulo counting, up/down counting, 32-bit counting, frequency measurement, ratio measurement, time-period measurement, event counting and PWM
Module Cycle Time 1 ms
Isolation Voltage 1500 V for 60 s
3.3 V Bus Current Consumption 200 mA typical
24 V Rack Current Consumption 40 mA typical
24 V Sensor Supply Current 80 mA
Mounting Modicon rack, secured with 2 screws
Dimensions (W x H x D) 32 x 103.76 x 92 mm
Operating Temperature 0 to 60 deg C
Relative Humidity 10-95%, non-condensing
Protection Rating IP20
Product Weight 0.112 kg
Coating Standard version
EAN 3595863910148
Lifecycle Carbon Footprint 101 kg CO2 eq.

Frequently Asked Questions

Q: What is the difference between the BMXEHC0200 and a standard digital input module?

A: The BMXEHC0200 is designed for high-speed pulse counting and measurement. It processes encoder and proximity sensor pulses at frequencies up to 60 kHz and supports dedicated counting functions, whereas a standard digital input module primarily handles discrete ON/OFF signals.

Q: Which encoders and proximity sensors can be connected to the BMXEHC0200?

A: It supports 2-wire and 3-wire proximity sensors with 19.2-30 V DC operating voltage and incremental encoders with 10-30 V DC push-pull outputs. The encoder output type and signal voltage must match the module input specifications.

Q: Can the BMXEHC0200 be replaced while the Modicon rack is powered?

A: Yes. Schneider Electric's BMXEHC0200 hardware manual specifies hot replacement capability. The rack can remain powered during removal and reinsertion, but the counter may need to be revalidated after the module is reinserted.

Paiement : virement bancaire, Western Union.

Port d’expédition : Xiamen.

Délai : généralement 1 à 3 jours ouvrés après confirmation du paiement (sous réserve des stocks).

Livraison dans le monde entier : nous expédions des pièces d’automatisation industrielle à des clients du monde entier. Les frais de transport sont indiqués avec votre demande de devis.

Foire aux questions (FAQ)

Questions fréquentes sur les devis, l’expédition, la garantie et les retours

Cliquez sur Demander un devis sur la page du produit et envoyez-nous la référence, la quantité souhaitée et le pays de destination. Notre équipe commerciale vous répondra avec les disponibilités actuelles, le prix et le délai de livraison estimé.

Les articles en stock sont généralement préparés après le paiement et la confirmation de la commande. La plupart des commandes sont expédiées depuis notre entrepôt en Chine, bien que le lieu d’expédition puisse varier en fonction des stocks disponibles.

Oui. Nous expédions des pièces d’automatisation industrielle à des clients partout dans le monde. Les frais d’expédition et le délai de transport dépendent de la destination, du poids du colis, de la taille du produit et des exigences locales en matière d’importation.

Nous utilisons généralement DHL, FedEx, UPS et d’autres services de messagerie internationaux. Le transporteur peut être choisi en fonction de la destination, de la rapidité de livraison, de la taille de l’envoi et des exigences du client.

Nos produits sont généralement couverts par une garantie de 12 mois. Les produits admissibles peuvent également être retournés conformément à notre politique de remboursement sous 30 jours. Veuillez contacter notre équipe avant de retourner tout article afin de confirmer les conditions applicables et les instructions de retour.

Products FAQs

Vous aimerez peut-être aussi