Accéder aux informations sur le produit
1 de 3

Schneider Electric BMXFTA300 Modicon X80 Prefabricated Cable Assembly

18 en stock
  • Manufacturer: Schneider
  • Product No.: BMXFTA300
  • Country of origin: France
  • Product Type: Modicon X80 Prefabricated Cable Assembly
  • Condition: Tout neuf
  • Payment: Virement télégraphique, Western Union
  • Weight: 0.5 kg
  • Shipping port: Xiamen
  • Warranty: 12 mois
  • Description
  • Reviews
  • Livraison et paiement

The Schneider Electric BMXFTA300, also cataloged as the BMXFTA300 prefabricated cable assembly, provides the electrical connection between Modicon M340 I/O modules and Advantys Telefast ABE 7 terminal blocks. It uses a 28-pin removable terminal block connector on the module side and a 25-pin SUB-D connector on the terminal block side, with a cable length of 3 m.

Hardware Specifications

Parameter Specification
Model BMXFTA300
Brand Schneider Electric
Product Series Modicon X80
Product Type Prefabricated Cable Assembly
Accessory Type Preformed Cable Set
Weight 0.5 kg
Cable Length 3 m
Module-Side Connection 1 removable 28-pin terminal block
Terminal Block-Side Connection 1 SUB-D 25-pin connector
Connector Configuration 28-pin terminal block to 25-pin SUB-D
Compatible I/O Modules BMXAMI0800, BMXAMI0810
Compatible Terminal Blocks ABE7CPA02, ABE7CPA03, ABE7CPA31, ABE7CPA31/E
Packaging Quantity 1 unit
EAN 3595864080451

I/O Connection Architecture and Compatibility

The BMXFTA300 provides a preassembled electrical interface between Modicon M340 analog I/O modules and Advantys Telefast ABE 7 connection systems.

Its connection arrangement consists of:

  • Module side: A removable 28-pin terminal block connects to the I/O module.
  • Terminal block side: A 25-pin SUB-D connector connects to the ABE 7 terminal block.
  • Cable assembly: A fixed 3 m cable carries the corresponding electrical connections between both interfaces.

The cable is specified for the BMXAMI0800 and BMXAMI0810 analog input modules. Compatibility also includes the ABE7CPA02, ABE7CPA03, ABE7CPA31, and ABE7CPA31/E terminal block references.

For system integration, connector pin assignments and channel wiring must correspond to the selected I/O module and terminal block configuration.

Frequently Asked Questions

Q: Can the BMXFTA300 be used with both BMXAMI0800 and BMXAMI0810?

A: Yes. Both analog input modules are explicitly listed as compatible products. The cable provides the 28-pin terminal block interface required on the module side.

Q: Does the BMXFTA300 support hot-swapping?

A: Hot-swapping capability is not specified for this cable assembly. Disconnect the associated electrical circuits and follow the module manufacturer's maintenance procedure before removing or installing connectors.

Q: What should be checked when replacing an existing BMXFTA300?

A: Verify the 28-pin removable terminal block, 25-pin SUB-D connector, 3 m cable length, and compatibility with the installed ABE 7 terminal block. Check connector condition and wiring continuity before returning the I/O circuit to service.

Field Installation Guidelines

1. Connector Verification: Confirm that the 28-pin removable terminal block matches the designated Modicon I/O module interface and that the 25-pin SUB-D connector matches the ABE 7 terminal block.

2. Cable Routing: Route the 3 m cable away from high-voltage power conductors, motor cables, and sources of electromagnetic interference where practical.

3. Mechanical Installation: Avoid excessive bending, tensile loading, twisting, or compression of the cable. Secure the assembly to prevent connector strain.

4. Electrical Inspection: Inspect connector contacts for oxidation, contamination, or mechanical damage before installation.

5. Shielding and Grounding: Follow the module and terminal block installation documentation for cable shielding and grounding arrangements. Do not assume an undocumented shield termination configuration.

6. Commissioning: Verify connector engagement, wiring continuity, channel correspondence, and analog input signal readings before placing the associated control loop into operation.

Paiement : virement bancaire, Western Union.

Port d’expédition : Xiamen.

Délai : généralement 1 à 3 jours ouvrés après confirmation du paiement (sous réserve des stocks).

Livraison dans le monde entier : nous expédions des pièces d’automatisation industrielle à des clients du monde entier. Les frais de transport sont indiqués avec votre demande de devis.

Foire aux questions (FAQ)

Questions fréquentes sur les devis, l’expédition, la garantie et les retours

Cliquez sur Demander un devis sur la page du produit et envoyez-nous la référence, la quantité souhaitée et le pays de destination. Notre équipe commerciale vous répondra avec les disponibilités actuelles, le prix et le délai de livraison estimé.

Les articles en stock sont généralement préparés après le paiement et la confirmation de la commande. La plupart des commandes sont expédiées depuis notre entrepôt en Chine, bien que le lieu d’expédition puisse varier en fonction des stocks disponibles.

Oui. Nous expédions des pièces d’automatisation industrielle à des clients partout dans le monde. Les frais d’expédition et le délai de transport dépendent de la destination, du poids du colis, de la taille du produit et des exigences locales en matière d’importation.

Nous utilisons généralement DHL, FedEx, UPS et d’autres services de messagerie internationaux. Le transporteur peut être choisi en fonction de la destination, de la rapidité de livraison, de la taille de l’envoi et des exigences du client.

Nos produits sont généralement couverts par une garantie de 12 mois. Les produits admissibles peuvent également être retournés conformément à notre politique de remboursement sous 30 jours. Veuillez contacter notre équipe avant de retourner tout article afin de confirmer les conditions applicables et les instructions de retour.

Products FAQs

Vous aimerez peut-être aussi