Accéder aux informations sur le produit
1 de 3

Schneider Electric BMXNRP0201 Modicon X80 Fiber Optic Repeater

18 en stock
  • Manufacturer: Schneider
  • Product No.: BMXNRP0201
  • Country of origin: France
  • Product Type: Modicon X80 Fiber Optic Repeater
  • Condition: Tout neuf
  • Payment: Virement télégraphique, Western Union
  • Weight: 203 g
  • Shipping port: Xiamen
  • Warranty: 12 mois
  • Description
  • Reviews
  • Livraison et paiement

The BMXNRP0201 is a Modicon X80 fiber optic repeater designed to extend Ethernet communication over single-mode optical fiber. It provides two 100BASE-TX RJ45 ports and two 100BASE-FX fiber ports, supporting optical transmission distances of up to 15 km at a wavelength of 1310 nm. The module operates on a 24 V supply and supports Ethernet communication in Modicon automation architectures.

Ethernet and Fiber Optic Communication

The BMXNRP0201 converts Ethernet communication between copper and optical fiber interfaces. Its two RJ45 ports support 100BASE-TX, while the two fiber ports support 100BASE-FX in accordance with IEEE 802.3u.

The single-mode fiber interface allows Ethernet links to extend beyond the distance limitations of conventional copper cabling. The specified operating distance is 0 to 15,000 m, making the module suitable for communication links between separated automation equipment where optical fiber is required.

Optical Interface Characteristics

The optical interface operates at 1310 nm and specifies attenuation of -15 to -8 dB for 9/125 um fiber. The receiver sensitivity range is -31 to -8 dBm, and the signal rise/fall time is 2.5 ns.

These optical parameters are relevant when checking fiber type, link attenuation and receiver operating conditions. The actual achievable transmission distance depends on the optical link budget and the characteristics of the installed fiber and connectors.

Power Supply and Status Indication

The module uses a rated supply voltage of 24 V. Its typical current consumption is 140 mA, with a maximum of 200 mA. Local LED indicators provide information about the power supply, fault status, Ethernet connections and fiber link activity.

  • 1 green LED for power supply status.
  • 1 red LED for fault indication (ERR).
  • 2 green LEDs for Ethernet link status.
  • 2 green LEDs for fiber connection status and activity.

Installation and System Integration

The BMXNRP0201 belongs to the Schneider Electric Modicon X80 range, which provides a common I/O and communication hardware platform for Modicon automation architectures. The module is specified for use with Modicon M340 and M580 systems.

It is installed in a module rack and secured with two screws. The product documentation also identifies Ethernet interlink cables as the connection method for CRA drop adapters. Its specified hot-swap capability supports module replacement within an appropriately configured system; the applicable rack and system replacement procedures should still be observed.

Technical Specifications

Parameter Specification
Model BMXNRP0201
Brand Schneider Electric
Product Type Fiber Optic Repeater
Product Series Modicon X80
Fiber Type Single-mode
Rated Voltage 24 V
Typical Current Consumption 140 mA
Maximum Current Consumption 200 mA
Copper Ethernet Ports 2 x RJ45, 100BASE-TX
Fiber Ethernet Ports 2 x 100BASE-FX
Ethernet Standard IEEE 802.3u
Optical Wavelength 1310 nm
Operating Distance 0-15,000 m
Optical Attenuation -15 to -8 dB (9/125 um)
Receiver Sensitivity -31 to -8 dBm
Rise/Fall Time 2.5 ns
Dielectric Strength 1400 V DC between field and bus; 500 V DC between channels
Hot-Swap Capability Supported
Protection Rating IP20
Dimensions (W x H x D) 32 x 100 x 86 mm
Weight 203 g
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 70 deg C
Relative Humidity 0 to 95%
Operating Altitude 0-4000 m
Environmental Carbon Footprint 167 kg CO2 eq.
Certifications CE, RCM, CSA, EAC, Merchant Navy, UL
Standards IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201
EAN 3595864144467

Frequently Asked Questions

Q: What is the difference between the BMXNRP0201 copper and fiber ports?

A: The two RJ45 ports provide 100BASE-TX Ethernet connections over copper, while the two 100BASE-FX ports provide Ethernet communication over single-mode optical fiber. This arrangement allows copper-based Ethernet equipment to communicate through an optical link.

Q: What fiber type and wavelength does the BMXNRP0201 require?

A: The specified fiber type is single-mode, with a nominal wavelength of 1310 nm and optical attenuation parameters based on 9/125 um fiber. Fiber and connector specifications should be checked against the optical link requirements.

Q: Does the BMXNRP0201 support hot swapping?

A: Yes. Schneider Electric lists hot swap as an available function for this module. Replacement must follow the applicable Modicon X80 rack and system procedures.

Paiement : virement bancaire, Western Union.

Port d’expédition : Xiamen.

Délai : généralement 1 à 3 jours ouvrés après confirmation du paiement (sous réserve des stocks).

Livraison dans le monde entier : nous expédions des pièces d’automatisation industrielle à des clients du monde entier. Les frais de transport sont indiqués avec votre demande de devis.

Foire aux questions (FAQ)

Questions fréquentes sur les devis, l’expédition, la garantie et les retours

Cliquez sur Demander un devis sur la page du produit et envoyez-nous la référence, la quantité souhaitée et le pays de destination. Notre équipe commerciale vous répondra avec les disponibilités actuelles, le prix et le délai de livraison estimé.

Les articles en stock sont généralement préparés après le paiement et la confirmation de la commande. La plupart des commandes sont expédiées depuis notre entrepôt en Chine, bien que le lieu d’expédition puisse varier en fonction des stocks disponibles.

Oui. Nous expédions des pièces d’automatisation industrielle à des clients partout dans le monde. Les frais d’expédition et le délai de transport dépendent de la destination, du poids du colis, de la taille du produit et des exigences locales en matière d’importation.

Nous utilisons généralement DHL, FedEx, UPS et d’autres services de messagerie internationaux. Le transporteur peut être choisi en fonction de la destination, de la rapidité de livraison, de la taille de l’envoi et des exigences du client.

Nos produits sont généralement couverts par une garantie de 12 mois. Les produits admissibles peuvent également être retournés conformément à notre politique de remboursement sous 30 jours. Veuillez contacter notre équipe avant de retourner tout article afin de confirmer les conditions applicables et les instructions de retour.

Products FAQs

Vous aimerez peut-être aussi