
Notified by email when this product becomes available
- Description
- Reviews
- Shipping & Payment
The GE IS220PRTDH1A is a Resistance Temperature Device (RTD) input module in the Mark VIe control system. It acquires resistance signals from connected RTD sensors and provides temperature measurement data to the control system through dual RJ-45 Ethernet interfaces. Its 8-channel input configuration supports multiple RTD sensor types and selectable scan rates.
Functional Description
The IS220PRTDH1A interfaces field RTD sensors with the Mark VIe control platform. RTD sensors change electrical resistance in response to temperature variations. The module acquires these resistance signals, converts them into digital measurement data, and communicates the results to the controller.
The eight input channels allow multiple temperature measurement points to be connected through the associated RTD terminal board. This provides a centralized interface for temperature signal acquisition without requiring a separate input pack for each sensor.
RTD Input Channels and Sensor Types
The module supports 8 three-wire RTD input channels. Its acquisition circuitry supplies a multiplexed 10 mA DC excitation current to the connected sensors. The measured voltage is used to determine resistance, with the selected RTD characteristic applied by the module processor to obtain temperature values.
Supported sensor types include:
- 100 Ohm and 200 Ohm platinum RTDs.
- 10 Ohm copper RTDs.
- 120 Ohm nickel RTDs.
The module also detects RTD open-circuit and short-circuit conditions through out-of-range measurements. The maximum two-way cable resistance is 15 Ohm, which should be considered when selecting field wiring.
Scan Rate and Signal Processing
The IS220PRTDH1A provides two scanning modes:
- Normal scan: 4 Hz. Each channel is sampled at a 250 ms interval. This mode provides 50 Hz and 60 Hz power-line noise rejection.
- Fast scan: 25 Hz. Each channel is sampled at a 40 ms interval. This mode provides faster measurement updates but sacrifices 50 Hz and 60 Hz noise rejection.
The scan mode should be selected according to the required measurement response and electrical noise conditions. The normal mode is appropriate where power-frequency interference rejection is important, while fast mode is intended for applications requiring more frequent measurement updates.
Communication and Terminal Board Interface
The module connects directly to a compatible SRTD or TRTD terminal board. The terminal board provides the field RTD connection interface, while the I/O pack handles signal acquisition and communication with the Mark VIe controller.
Two RJ-45 Ethernet ports provide connections to the Mark VIe I/O network (IONet). The PRTD input pack supports simplex operation; two Ethernet connections should not be interpreted as dual-module control redundancy.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | IS220PRTDH1A |
| Brand | GE (General Electric) |
| Series | Mark VIe |
| Product Type | Resistance Temperature Device Input Module |
| Hardware Revision | H1A |
| Number of Channels | 8 RTD Inputs |
| RTD Wiring | 3-wire |
| Supported RTD Types | 100 Ohm and 200 Ohm Platinum, 10 Ohm Copper, 120 Ohm Nickel |
| A/D Converter Resolution | 14-bit |
| Scan Rate | 4 Hz / 25 Hz |
| RTD Excitation Current | 10 mA DC, multiplexed |
| Maximum Lead Resistance | 15 Ohm, two-way cable resistance |
| Communication Interface | Dual RJ-45 Ethernet |
| Power Supply | 28 V DC nominal |
| Maximum Power Supply Current | 0.24 A |
| Operating Temperature | -30 deg C to +65 deg C (-22 deg F to +149 deg F) |
| Storage Temperature | -40 deg C to +85 deg C (-40 deg F to +185 deg F) |
| Relative Humidity | 5% to 95%, non-condensing |
| Cooling Requirements | Free air convection |
| Mounting Type | Direct mounting on SRTD / TRTD terminal board |
Frequently Asked Questions
Q: Which terminal boards are compatible with the IS220PRTDH1A?
A: The module supports the TRTDH1D, TRTDH2D and SRTD terminal boards. It is not compatible with the DIN-rail-mounted DRTD terminal board. The exact terminal board revision should be checked before replacement.
Q: What is the difference between the 4 Hz and 25 Hz scan modes?
A: The 4 Hz mode provides 50 Hz and 60 Hz power-line noise rejection, while the 25 Hz mode provides faster measurement updates without the same power-frequency rejection. Select the mode according to the measurement response and noise-rejection requirements.
Q: Does the IS220PRTDH1A support redundant operation?
A: The PRTD input pack supports simplex operation. Its two Ethernet ports provide network connection options but do not establish dual-module redundancy or TMR operation.
Payment: T/T, Western Union.
Shipping port: Xiamen.
Lead time: Typically 1–3 working days after payment confirmation (subject to stock).
Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.
F.A.Q.
Common questions about quotes, shipping, warranty and returnsClick Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.
In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.
Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.
We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.
Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.
You may also like
Blog Posts
Industrial automation news, technical guides, and product updates.
