Skip to product information
1 of 3

Schneider BMXCPS3020 Modicon X80 Power Supply Module

18 in stock
  • Manufacturer: Schneider
  • Product No.: BMXCPS3020
  • Country of origin: France
  • Product Type: Modicon X80 Power Supply Module
  • Condition: Brand New
  • Payment: T/T, Western Union
  • Weight: 0.34 kg
  • Shipping port: Xiamen
  • Warranty: 12 months
  • Description
  • Reviews
  • Shipping & Payment

The Schneider Electric BMXCPS3020 is an isolated DC power supply module in the Modicon X80 range. It supplies power to a Modicon X80 I/O rack and its installed modules, providing separate 24 VDC and 3.3 VDC secondary outputs for the I/O and processor supply and the rack logic supply. It accepts an isolated 24-48 VDC input and includes secondary-circuit overload, overvoltage, and short-circuit protection.

Power Supply Function

The BMXCPS3020 converts its DC input into the secondary power required by the X80 rack. Its outputs serve two different functions:

  • 24 VDC output: Supplies the I/O modules and processor, with a rated secondary power of 31.2 W.
  • 3.3 VDC output: Supplies I/O module logic, with a rated secondary power of 15 W.

Separating these output functions allows the rack to supply both module operating power and internal logic power. The maximum power dissipation of the module is 8.5 W.

Input and Protection

The module accepts an isolated DC input with a nominal voltage range of 24-48 VDC. The specified primary voltage limits are 18-62.4 VDC, providing the permitted input operating range.

The protection functions differ between the primary and secondary circuits. The primary circuit has an internal fuse that is not accessible, while the secondary circuit includes overload, overvoltage, and short-circuit protection for the 24 V sensor supply.

The specified inrush current is 30 A at 24 VDC and 60 A at 48 VDC. These values should be considered when evaluating upstream DC power supply capacity and input circuit protection.

Electrical Connections and Indicators

The BMXCPS3020 provides separate connectors for power input and alarm relay connections:

  • One 5-pin connector for the power supply input and protective earth.
  • One 2-pin connector for the alarm relay.
  • One green LED indicating that rack voltage is OK.
  • One RESET push button for a cold start.

The maximum specified cable distance between devices depends on the copper conductor cross-section: 10 m with 1.5 mm2 cable or 15 m with 2.5 mm2 cable.

Technical Specifications

Parameter Specification
Model BMXCPS3020
Brand Schneider Electric
Product Type Modicon X80 Power Supply Module
Product Range Modicon X80
Input Voltage 24-48 VDC, isolated
Primary Voltage Limits 18-62.4 VDC
Input Current 0.83 A at 48 VDC; 1.65 A at 24 VDC
Secondary Power - 24 VDC 31.2 W
Secondary Power - 3.3 VDC 15 W
Secondary Current - 24 VDC 1.3 A
Secondary Current - 3.3 VDC 4.5 A
Inrush Current 30 A at 24 VDC; 60 A at 48 VDC
I2t at Power-On 1 A2.s at 24 VDC; 3 A2.s at 48 VDC
Power-On Charge 0.2 A.s at 24 VDC; 0.3 A.s at 48 VDC
Maximum Power Dissipation 8.5 W
MTBF 4,600,000 h
Primary Circuit Protection Internal, non-accessible fuse
Secondary Circuit Protection Overload, overvoltage and short-circuit protection
LED Indicator Green - rack voltage OK
Reset Function Cold-start RESET button
Electrical Connections 1 x 5-pin power connector; 1 x 2-pin alarm relay connector
Maximum Cable Distance 10 m with 1.5 mm2 copper cable; 15 m with 2.5 mm2 copper cable
Power Interruption Immunity 1 ms
Insulation Resistance >= 10 MOhm, primary/earth and primary/secondary
Dielectric Strength 1500 V, primary/earth and primary/secondary
Vibration Resistance 3 Gn
Shock Resistance 30 gn
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Protective Coating TC
Operating Altitude 0-2,000 m; derating required from 2,000 to 5,000 m
Weight 0.34 kg
EAN 3595863908985
Lifecycle Carbon Footprint 457 kg CO2 eq.

Installation and Compatibility

The BMXCPS3020 is designed for installation in a Modicon X80 rack. It must be inserted into the module carrier and secured with two screws. Its stated backplane compatibility excludes the BMEXBP..02 backplane family.

The manufacturer specifies compatibility with Modicon X80 module carriers, subject to the stated backplane restriction. Before replacement, verify the installed rack reference and backplane type rather than relying solely on the X80 product family designation.

Standards and Certifications

The BMXCPS3020 is specified with the following certifications and standards:

  • Certifications: CE, RCM, Merchant Navy, CSA, EAC and UL.
  • Standards: EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201.
  • EU directives: 2014/35/EU (Low Voltage) and 2014/30/EU (Electromagnetic Compatibility).

Frequently Asked Questions

Q: What is the difference between the 24 VDC and 3.3 VDC outputs?

A: The 24 VDC output supplies the I/O modules and processor, with 31.2 W of rated power. The 3.3 VDC output supplies I/O module logic, with 15 W of rated power. Both outputs serve different power requirements within the X80 rack.

Q: Is the BMXCPS3020 compatible with all Modicon X80 backplanes?

A: No. The specified compatibility excludes BMEXBP..02 backplanes. Check the exact backplane reference before selecting this power supply for a rack replacement.

Q: What input voltage can the BMXCPS3020 accept?

A: Its nominal isolated DC input range is 24-48 VDC, with specified primary voltage limits of 18-62.4 VDC. The input current is 1.65 A at 24 VDC and 0.83 A at 48 VDC. Upstream power supply and protection selection should also account for its specified inrush current.

Payment: T/T, Western Union.

Shipping port: Xiamen.

Lead time: Typically 1–3 working days after payment confirmation (subject to stock).

Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.

F.A.Q.

Common questions about quotes, shipping, warranty and returns

Click Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.

In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.

Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.

We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.

Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.

Products FAQs

You may also like