
Notified by email when this product becomes available
- Description
- Reviews
- Shipping & Payment
The BMXCPS4022S is a Schneider Electric Modicon X80 safety power supply module designed for redundant power architectures in industrial automation systems. It accepts a 24-48 VDC primary supply and provides separate 24 VDC and 3.3 VDC secondary outputs for X80 I/O module logic and processor power. Network-based diagnostics provide information on redundancy status, operating time and remaining service life.
Power Supply Function and Redundant Architecture
The BMXCPS4022S supplies the internal power rails required by Modicon X80 system modules. Its two secondary supply outputs serve different electrical loads: the 24 VDC output supplies the I/O module power circuit, while the 3.3 VDC output supplies I/O module logic and processor circuitry.
The module supports redundant power architectures. Its diagnostic functions include redundancy testing and monitoring of remaining operating life, temperature and operating time. These functions provide maintenance information for assessing the power supply condition and planning replacement.
Electrical Protection and Status Monitoring
The secondary circuits incorporate overload, overvoltage and short-circuit protection. These protections address abnormal conditions on the module's output side; they should not be interpreted as a substitute for external protection of the primary supply circuit.
Three green LED indicators provide local status information:
- Voltage OK: indicates that the required voltages are present.
- Redundancy OK: indicates the redundancy status.
- Power supply status: indicates the module's power supply condition.
A RESET button supports a cold restart. The module also provides an alarm relay connection for external status signalling.
Electrical Specifications
The output power allocation must be considered when calculating the rack power budget. The 40 W rating on the 24 VDC rail applies when the 3.3 VDC output is not loaded; the available power on both rails must remain within the module's total power capacity.
| Parameter | Specification |
|---|---|
| Model | BMXCPS4022S |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Safety Power Supply Module |
| Primary Voltage | 24-48 VDC |
| Primary Voltage Limit | 18-62.4 VDC |
| Supply Circuit | DC |
| Input Current | 1.9 A at 24 V; 1 A at 48 V |
| Inrush Current | 60 A at 24 V; 60 A at 48 V |
| Secondary Output 1 | 3.3 VDC, 18 W |
| Secondary Output 2 | 24 VDC, 40 W |
| Secondary Current | 5 A at 3.3 VDC; 1.67 A at 24 VDC |
| Maximum Power Dissipation | 8.5 W |
| MTBF | 721,000 hours |
| Primary Circuit Protection | Internal, inaccessible fuse |
| Secondary Circuit Protection | Overload, overvoltage and short-circuit protection |
| Electrical Connection | 5-pin power supply connector and protective earth; 2-pin alarm relay connector |
| Reset Function | Cold-start RESET pushbutton |
| Dielectric Strength | 1,500 V primary/ground; 1,500 V primary/secondary |
| Insulation Resistance | >= 100 MOhm primary/ground; >= 100 MOhm primary/secondary |
| Power Interruption Immunity | 1 ms |
| Protection Rating | IP20 |
| Operating Temperature | -25 to 60 deg C (source discrepancy; see editorial note) |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Operating Altitude | 0-2,000 m; derating required from 2,000 to 5,000 m |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 15 Gn |
| Protective Treatment | Conformal coating |
| Weight | 0.81 kg |
| Certifications | CE, UL, CSA, RCM, EAC, ATEX Zone 2/22, IECEx Zone 2/22, TÜV, Marine |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10 |
| EAN | 3606489562496 |
Installation and Electrical Connections
The BMXCPS4022S is designed for installation in a Modicon X80 module rack. It occupies the dedicated power supply position marked CPS and is secured to the rack using two screws.
The package includes two removable caged terminal blocks: one 5-way connector for the DC supply and protective earth, and one 2-way connector for the alarm relay. The module has an IP20 enclosure rating and is intended for installation inside a suitable equipment enclosure.
Environmental and Certification Requirements
The module has a conformal protective coating and specified resistance to gas, dust, sand, salt and mould-related environmental conditions. Its environmental classifications include gas resistance class Gx under ISA S71.04, class 3C4 under IEC 60721-3-3, and dust and sand resistance class 3S4.
The listed hazardous-location classifications include Class I Division 2, ATEX Zone 2/22 and IECEx Zone 2/22. Actual installation approval must be checked against the applicable certificate, equipment configuration and site requirements.
Frequently Asked Questions
Q: Can the BMXCPS4022S operate in a redundant power supply configuration?
A: Yes. It is designed for redundant power architectures and provides redundancy diagnostics, including redundancy testing and status monitoring. The system configuration must account for the power requirements of both supply modules.
Q: Can the 3.3 VDC and 24 VDC outputs deliver their maximum rated power simultaneously?
A: The output ratings must be evaluated against the total available power budget. The 40 W rating on the 24 VDC output applies when the 3.3 VDC output is not loaded. Do not calculate the two output ratings as independent power capacities.
Q: What does the RESET button do on this module?
A: The RESET button initiates a cold restart of the rack. This reinitializes the rack modules and, when installed in the main local rack, also reinitializes the CPU. The operation can cause I/O modules to transition to their initialized state, so its use should be coordinated with the control system operating procedure.
Payment: T/T, Western Union.
Shipping port: Xiamen.
Lead time: Typically 1–3 working days after payment confirmation (subject to stock).
Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.
F.A.Q.
Common questions about quotes, shipping, warranty and returnsClick Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.
In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.
Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.
We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.
Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.
You may also like
Blog Posts
Industrial automation news, technical guides, and product updates.
