Skip to product information
1 of 3

Schneider BMXDDI6402K Modicon X80 64-Channel Digital Input Module

18 in stock
  • Manufacturer: Schneider
  • Product No.: BMXDDI6402K
  • Country of origin: France
  • Product Type: Modicon X80 64-Channel Digital Input Module
  • Condition: Brand New
  • Payment: T/T, Western Union
  • Weight: 0.145 kg
  • Shipping port: Xiamen
  • Warranty: 12 months
  • Description
  • Reviews
  • Shipping & Payment

The BMXDDI6402K is a 64-channel digital input module in the Schneider Electric Modicon X80 range. It accepts 24 VDC positive-logic input signals through two 40-pin connectors, with isolated input channels and individual channel status indication. The module supports Modicon M340 and M580 PLC architectures, including local and remote I/O configurations.

Functional Description

The BMXDDI6402K acquires discrete field signals and transfers their status to the PLC system for logic processing. Its 64 isolated input channels allow multiple field devices to be monitored through a single I/O module.

The positive-logic (sink) input configuration defines the electrical relationship between the field signal and the input circuit. The guaranteed ON and OFF voltage thresholds provide the limits for determining valid input states.

Input Characteristics

The module provides a typical response time of 4 ms and a maximum response time of 7 ms. These values determine how quickly changes in field input signals are reflected in the module's input status.

The input circuit has a 40 kOhm impedance and draws 0.6 mA per input at 24 VDC. Input parallelization is not supported, so each channel should be treated as an individual input point.

Connection and Diagnostics

Two 40-pin connectors provide the field wiring interface. The module uses channel-level LEDs to indicate individual input status, together with RUN and ERR indicators for module operating status and fault identification.

The specified external protection is a 0.5 A fast-acting fuse per channel group. The module does not provide reverse-polarity protection, so the external supply polarity must be observed during wiring.

Technical Specifications

Parameter Specification
Model BMXDDI6402K
Brand Schneider Electric
Product Series Modicon X80
Product Type Discrete Input Module
Number of Inputs 64
Input Type Isolated digital inputs
Rated Input Voltage 24 VDC
Input Logic Positive logic (sink)
Input Current 0.6 mA at 24 VDC
Guaranteed ON Voltage >= 15 V
Guaranteed OFF Voltage 18 VDC: Sensor OK
Input Isolation 1500 V for 1 minute
Insulation Resistance > 10 MOhm at 500 VDC
Input Parallelization Not supported
Power Dissipation 4.3 W
Protection External 0.5 A fast-acting fuse per channel group
Reverse Polarity Protection Not provided
Hot-Swapping Fallback Supported
MTBF 510,000 hours
Local Diagnostics RUN, ERR, I/O and individual channel LEDs
Controller Compatibility Modicon M340 and M580
I/O Configuration Local or remote I/O
Field Connection 2 x 40-pin connectors
Mounting Modicon X80 module rack
Dimensions (H x W x D) 134.6 x 32 x 86 mm
Weight 0.145 kg
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Operating Altitude 0-2,000 m; derating required from 2,000 to 5,000 m
Vibration Resistance 3 Gn
Shock Resistance 30 Gn
Pollution Degree 2
EAN 3595863910445

Installation and System Integration

The BMXDDI6402K is installed in a Modicon X80 module rack and secured with two screws. Its two 40-pin connectors require suitable preassembled wiring assemblies or compatible connection accessories.

The module is designed for M340 and M580 PLC architectures. Before replacement, verify the controller platform, local or remote rack configuration, connector arrangement and field wiring. The 24 VDC sensor supply must remain within the specified 19-30 VDC range.

Certifications and Environmental Conditions

The product specification identifies CE, cULus, RCM, EAC and UKCA markings. The listed compliance requirements include the Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.

The module has an IP20 enclosure rating and a specified operating temperature range of 0 to 60 deg C. Condensation is not permitted under the stated humidity conditions.

Frequently Asked Questions

Q: How many digital input channels does the BMXDDI6402K provide?

A: It provides 64 electrically isolated 24 VDC digital input channels. The channels use positive logic (sink) and are connected through two 40-pin connectors.

Q: Can the BMXDDI6402K be used with Modicon M340 and M580 controllers?

A: Yes. It is specified for Modicon M340 and M580 PLC platforms, supporting local and remote I/O architectures. The applicable rack and system configuration must be verified before installation.

Q: Does the BMXDDI6402K support hot swapping?

A: The product specifications identify hot-swapping fallback support. Actual replacement procedures must follow the applicable PLC rack and system maintenance requirements.

Payment: T/T, Western Union.

Shipping port: Xiamen.

Lead time: Typically 1–3 working days after payment confirmation (subject to stock).

Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.

F.A.Q.

Common questions about quotes, shipping, warranty and returns

Click Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.

In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.

Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.

We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.

Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.

Products FAQs

You may also like