
Notified by email when this product becomes available
- Description
- Reviews
- Shipping & Payment
The Schneider Electric BMXDDM16025H is a Modicon X80 discrete I/O module with 8 DC inputs and 8 relay outputs. It combines 24 VDC input signal monitoring with relay-based output switching in a single module. Its conformal coating and severe-environment classification distinguish this version from standard-treatment configurations.
Input and Output Configuration
The module provides two different signal interfaces within one I/O unit:
- 8 discrete inputs: 24 VDC positive logic, current-sinking input type.
- 8 relay outputs: Isolated relay contacts for switching DC or AC loads.
- Input current: 3.5 mA per channel.
- Input impedance: 6,800 Ohm.
- Input channels cannot be connected in parallel.
The inputs receive signals from field sensors, while the relay outputs switch external loads through their respective output circuits. This arrangement allows the controller to monitor discrete field states and operate relay-controlled devices using the same module.
Input Signal Characteristics
The 24 VDC inputs support 2-wire and 3-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 3 requirements. The guaranteed input thresholds are:
- Logic state 1: At least 11 V and 2 mA.
- Logic state 0: Maximum 5 V and 1.5 mA.
- Typical response time: 4 ms.
- Maximum response time: 7 ms.
These thresholds define the signal levels required for reliable input-state recognition. The module also provides reverse-polarity protection on the input side.
Relay Output Characteristics
The eight relay outputs support both DC and AC switching applications.
- DC operating voltage: 19-30 VDC.
- AC operating voltage: 19-264 VAC.
- Maximum output current: 2 A.
- Output activation response:
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM16025H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete I/O Module |
| Application | Severe environments |
| Discrete Inputs | 8 |
| Input Voltage | 24 VDC |
| Input Type | Current sink, positive logic |
| Input Current | 3.5 mA |
| Input Impedance | 6,800 Ohm |
| Discrete Outputs | 8 |
| Output Type | Relay |
| DC Output Voltage | 19-30 VDC |
| AC Output Voltage | 19-264 VAC |
| Maximum Output Current | 2 A |
| Typical Input Response Time | 4 ms |
| Maximum Input Response Time | 7 ms |
| Output Activation Time | 10 MOhm at 500 VDC |
| Dielectric Strength | 1,500 VAC, primary/secondary; 2,830 VAC, output relay; 500 VDC, between I/O groups |
| External Input Fuse | 0.5 A fast-blow per input group |
| Output Protection | External fast-blow fuse per output channel or group |
| Protective Treatment | Conformal coating |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Environmental Protection | IP20 |
| Gas Resistance | Gx, 3C4 |
| Dust and Sand Resistance | 3S4 |
| Salt Resistance | Level 2 |
| Mold and Fungal Spore Resistance | 3B2 |
| Net Weight | 0.135 kg |
| Package Dimensions | 12.0 x 11.0 x 5.5 cm |
| Package Weight | 168 g |
| Lifecycle Carbon Footprint | 35 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between BMXDDM16025H and BMXDDM16025?
A: Both models provide 8 x 24 VDC positive logic inputs and 8 relay outputs. The BMXDDM16025H is the hardened version, featuring conformal coating and an extended operating temperature range of -25 to 70 deg C.
Q: Can the relay outputs switch both AC and DC loads?
A: Yes. The relay outputs support 19-30 VDC and 19-264 VAC operating ranges, with a maximum output current of 2 A. The connected load must remain within the applicable voltage and current ratings.
Q: Can the eight input channels be connected in parallel?
A: No. Input paralleling is not permitted. Each input channel should receive its own correctly wired field signal.
Payment: T/T, Western Union.
Shipping port: Xiamen.
Lead time: Typically 1–3 working days after payment confirmation (subject to stock).
Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.
F.A.Q.
Common questions about quotes, shipping, warranty and returnsClick Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.
In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.
Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.
We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.
Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.
You may also like
Blog Posts
Industrial automation news, technical guides, and product updates.
