Skip to product information
1 of 3

Schneider BMXDRA0815 Modicon X80 Relay Output Module

18 in stock
  • Manufacturer: Schneider
  • Product No.: BMXDRA0815
  • Country of origin: France
  • Product Type: Modicon X80 Relay Output Module
  • Condition: Brand New
  • Payment: T/T, Western Union
  • Weight: 0.169 kg
  • Shipping port: Xiamen
  • Warranty: 12 months
  • Description
  • Reviews
  • Shipping & Payment

The BMXDRA0815 is an 8-channel discrete relay output module in the Schneider Electric Modicon X80 range. It provides eight electrically isolated normally open (NO) relay outputs for switching AC or DC loads. The module supports rated load voltages of 24-240 V AC and 24-125 V DC, with positive output logic and a standard protective coating. It is designed for Modicon M340 and M580 automation platforms.

Output Configuration and Operation

The BMXDRA0815 uses electromechanical relay contacts to switch external loads. Each of its eight output channels operates as a normally open contact, closing when the corresponding output command is activated and opening when the command is removed.

The relay contacts support both AC and DC switching. Unlike transistor output modules, relay outputs can switch different voltage types without requiring the external load to use the same voltage as the PLC's internal logic supply. The eight outputs are electrically isolated, allowing separate load circuits within the limits of the module's electrical ratings.

Switching Characteristics and Load Protection

The module has an activation response time of 10 ms or less and a deactivation response time of 13 ms or less. These characteristics should be considered when selecting the module for applications involving frequent switching or time-sensitive output sequences.

The permissible switching load depends on voltage, load type, ambient temperature and electrical operating conditions. Inductive loads require particular attention because switching can generate voltage transients across relay contacts.

  • AC inductive loads require an appropriately rated RC circuit or ZNO-type surge limiter across each output channel.
  • DC inductive loads require a discharge diode on each output channel.
  • External fast-blow fuses are required for short-circuit and overload protection.

The minimum switching load is also relevant when controlling low-current signals. Contact operation should be checked against the manufacturer's specified minimum load rather than assuming that the rated voltage range guarantees reliable switching at every current level.

Modicon X80 Platform Integration

The BMXDRA0815 belongs to the Modicon X80 common I/O architecture, which provides a shared hardware environment for Modicon M340 and M580 PLC systems. It can be used in local or remote I/O configurations, subject to the selected PLC architecture and rack arrangement.

The module is installed in an appropriate X80 module rack and secured using two mounting screws. Its field connections use a compatible 20-pin connection arrangement, with cage-clamp, screw-clamp or removable spring-type terminal block options.

Technical Specifications

Parameter Specification
Model BMXDRA0815
Brand Schneider Electric
Product Series Modicon X80
Product Type Discrete Relay Output Module
Number of Outputs 8
Output Type Electromechanical Relay
Contact Configuration 8 Normally Open (NO)
Output Isolation Electrically isolated channels
Discrete Output Logic Positive
Rated AC Voltage 24-240 V AC
Rated DC Voltage 24-125 V DC
Minimum Switching Load 5 V DC / 10 mA
Output Activation Time 10 MOhm at 500 V DC
Dielectric Strength 1780 V AC at 50/60 Hz for 1 min
MTBF 3,200,000 h (product specification)
Operating Temperature 0 to 60 deg C
Relative Humidity 5-95% at 60 deg C, non-condensing
Protection Rating IP20
Protective Coating Standard version
Product Weight 0.169 kg
EAN 3606481275608
Lifecycle Carbon Footprint 157 kg CO2 eq.

Frequently Asked Questions

Q: How many relay outputs does the BMXDRA0815 provide?

A: It provides eight electrically isolated normally open relay outputs. Each channel can switch an external AC or DC load within its specified electrical switching limits.

Q: Can the BMXDRA0815 switch both AC and DC loads?

A: Yes. Its rated voltage ranges are 24-240 V AC and 24-125 V DC. However, permissible switching power and current depend on the load type and operating conditions. Inductive loads require appropriate external suppression components.

Q: Is the BMXDRA0815 compatible with Modicon M340 and M580 PLC systems?

A: Yes. It belongs to the Modicon X80 I/O family and is specified for Modicon M340 and M580 local or remote I/O configurations. The selected rack, connection block and system architecture must support the module.

Payment: T/T, Western Union.

Shipping port: Xiamen.

Lead time: Typically 1–3 working days after payment confirmation (subject to stock).

Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.

F.A.Q.

Common questions about quotes, shipping, warranty and returns

Click Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.

In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.

Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.

We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.

Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.

Products FAQs

You may also like