Media gallery
Media gallery
Media gallery

Schneider Electric BMEXBP0602 Modicon X80 Ethernet Backplane Rack

18 in stock

Manufacturer: Schneider
Product No.: BMEXBP0602
Country of origin: France
Product Type: Modicon X80 Ethernet Backplane Rack
Condition: Brand New
Payment: T/T, Western Union
Weight: 1.02 kg
Shipping port: Xiamen
Warranty: 12 months

Description
Reviews
Shipping & Payment

Configured for in-rack Ethernet and X-bus communication, the Schneider Electric BMEXBP0602 (BMEXBP0602 Modicon X80 Ethernet backplane rack) provides physical bus connections for mixed modules within Modicon M340 and Modicon M580 architectures. The rack provides 6 slots with Ethernet and X-bus connectors and supports an XBE expansion connection.

Hardware Specifications

Parameter	Specification
Model	BMEXBP0602
Brand	Schneider Electric
Product Range	Modicon X80
Product Type	Ethernet Backplane Rack
Number of Slots	6 bus X + Ethernet
Backplane Interfaces	Ethernet and X-bus
Expansion Connection	1 x XBE connector
Compatible Modules	Specific application modules, BMX processors, BME processors, I/O modules, BMXCPS4002
Current Consumption	152 mA at 24 VDC; 58 mA at 3.3 VDC
Power Consumption	3.6 W at 24 VDC; 191 mW at 3.3 VDC
IP Rating	IP20
Operating Temp	0 to 60 deg C
Relative Humidity	5 to 95% without condensation
Weight	1.02 kg
Dimensions	Product dimensions not specified in supplied data
MTBF	1,353,797 h
Mounting	4 screws, 4 M6 screws, or 35 mm symmetrical DIN rail clips
Standards	EN 61131-2, EN 61000-6-4, EN 61000-6-2, EN 61010-2-201

Ethernet and X-Bus Backplane Characteristics

BMEXBP0602 provides six physical module positions with Ethernet and X-bus connectivity for mixed Modicon X80 modules. The backplane is shared across Modicon M340 and Modicon M580 architectures, allowing compatible BMX and BME processors and I/O modules to be installed on the same platform.

The backplane incorporates one XBE connector for electrical connection to an expansion module. Its electrical load is specified as 152 mA at 24 VDC and 58 mA at 3.3 VDC. The rack supports hot swapping for most compatible I/O modules, subject to the module and system configuration requirements.

The mounting structure supports panel installation, plate mounting, and 35 mm symmetrical DIN rail mounting. The IP20 enclosure rating requires installation inside an appropriate protective enclosure when higher environmental protection is required.

Frequently Asked Questions

Q: How many module positions are provided by BMEXBP0602?
A: The rack provides 6 module slots with Ethernet and X-bus connections.

Q: What is the backplane current consumption?
A: The specified current consumption is 152 mA at 24 VDC and 58 mA at 3.3 VDC.

Q: Does BMEXBP0602 support hot swapping?
A: The supplied product data specifies hot swap capability for most compatible I/O modules. Actual hot-swap operation depends on the installed module and PAC configuration.

Field Installation Guidelines

Install the rack on a mechanically stable panel, plate, or 35 mm symmetrical DIN rail using the specified mounting method. Maintain correct alignment of the backplane connectors before inserting modules.

Verify the 24 VDC and 3.3 VDC backplane load against the available system power budget. Keep Ethernet, control, and power wiring routed according to the installation requirements of the complete Modicon X80 system.

For shielded communication cables, terminate cable shielding according to the system grounding design and avoid unnecessary parallel routing with high-current or high-noise conductors. Do not install or remove modules while power is applied unless the specific module and system documentation permits hot swapping.

The IP20 rating does not provide protection against water, dust ingress beyond the applicable enclosure conditions, or direct environmental exposure. Install the rack inside the required control enclosure and maintain the specified 0 to 60 deg C operating range.

Payment: T/T, Western Union.

Shipping port: Xiamen.

Lead time: Typically 1–3 working days after payment confirmation (subject to stock).

Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.

F.A.Q.

Common questions about quotes, shipping, warranty and returns

Click Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.

In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.

Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.

We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.

Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.