Skip to product information
1 of 3

Schneider Electric BMXDDM3202K Modicon X80 Discrete I/O Module

18 in stock
  • Manufacturer: Schneider
  • Product No.: BMXDDM3202K
  • Country of origin: France
  • Product Type: Modicon X80 Discrete I/O Module
  • Condition: Brand New
  • Payment: T/T, Western Union
  • Weight: 0.11 kg
  • Shipping port: Xiamen
  • Warranty: 12 months
  • Description
  • Reviews
  • Shipping & Payment

The BMXDDM3202K is a 24 VDC discrete mixed input/output module in the Schneider Electric Modicon X80 platform. It combines 16 positive-logic (sink) discrete inputs and 16 positive-logic (source) solid-state outputs within a single rack slot, using a 40-pin front connector for high-density field wiring in Modicon M340 and M580 automation architectures.

Channel Configuration and Electrical Characteristics

The input section meets IEC/EN 61131-2 Type 3 requirements with a 9600 Ohm input impedance, a typical response time of 4 ms (7 ms maximum), and sensor voltage supervision that flags faults below 14 VDC and confirms normal status above 18 VDC.

The output section provides 16 solid-state channels rated at 0.1 A nominal per channel (0.125 A maximum per channel, 3.2 A maximum per module) with a 1.2 ms output response time and a maximum voltage drop below 1.5 V in State 1. Up to 3 outputs can be connected in parallel to drive higher-current loads, and each output channel integrates reverse polarity and overvoltage protection.

System Compatibility and Mounting

The module operates across Modicon M340 and Modicon M580 PLC systems in both local racks and remote I/O drops. It draws up to 166 mA from the 3.3 VDC backplane bus and up to 104 mA at 24 VDC.

This standard-version unit features IP20 ingress protection and TC (all-climate) treatment for operation from 0 deg C to 60 deg C. Field signals connect via a 40-pin removable terminal block or pre-wired cordsets such as the BMXFCW503 paired with Modicon ABE7 Telefast sub-bases. The module installs directly into a Modicon X80 rack and secures with two captive mounting screws.

Technical Specifications

Parameter Specification
Model BMXDDM3202K
Brand Schneider Electric
Series Modicon X80
Product Type Discrete Mixed I/O Module
Discrete Inputs 16 channels, 24 VDC, positive logic (IEC/EN 61131-2 Type 3)
Input Impedance 9600 Ohm
Input Response Time 4 ms typical, 7 ms maximum
Sensor Voltage Detection Threshold Less than 14 VDC fault; greater than 18 VDC OK
Discrete Outputs 16 channels, 24 VDC, positive logic solid-state
Rated Output Current 0.1 A per channel (0.125 A max per channel, 3.2 A max per module)
Output Response Time 1.2 ms
Output Voltage Drop Less than 1.5 V in State 1
Output Paralleling Yes, maximum 3 outputs
Resistive Load Impedance Less than or equal to 220 Ohm
Maximum Overload Time 15 ms
Switching Frequency 0.5 / LI^2 Hz
Protection Features Reverse polarity protection (input and output), output overvoltage protection, external 0.5 A fast-blow fuse per input group
Current Consumption Less than or equal to 104 mA at 24 VDC; less than or equal to 166 mA at 3.3 VDC
Dielectric Strength 1500 VAC at 50/60 Hz for 1 min (output/ground, output/internal logic, primary/secondary); 500 VDC for 1 min (between input and output groups)
Insulation Resistance Greater than 10 MOhm at 500 VDC
Front Connector 40-pin connector
Ambient Operating Temperature 0 deg C to 60 deg C
Relative Humidity 5% to 95% at 55 deg C, non-condensing
Degree of Protection IP20
Coating Standard version (TC all-climate treatment)
MTBF 429,248 hours (430,000 hours nominal)
Weight 0.11 kg
Certifications and Standards CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy; EN 61131-2 Type 3, EN 61000-6-5, EN 61850-3

Frequently Asked Questions

Q: How does the BMXDDM3202K differ from the BMXDDM3202KH?A: The BMXDDM3202K is the standard-coated version rated for 0 deg C to 60 deg C, whereas the "H" suffix variants in the Modicon X80 family add conformal coating and extended temperature ratings for harsh environments.

Q: Can outputs on the BMXDDM3202K be wired in parallel for higher load current?A: Yes, up to 3 output channels can be connected in parallel on this module to increase current capacity, provided the total module current does not exceed 3.2 A.

Q: What wiring accessories are required to connect field devices to this 40-pin module?A: The module uses a 40-pin front interface and requires a compatible 40-pin removable terminal block or pre-wired cordsets (such as BMXFCW503) connected to Modicon ABE7 Telefast wiring bases.

Payment: T/T, Western Union.

Shipping port: Xiamen.

Lead time: Typically 1–3 working days after payment confirmation (subject to stock).

Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.

F.A.Q.

Common questions about quotes, shipping, warranty and returns

Click Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.

In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.

Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.

We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.

Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.

Products FAQs

You may also like