Skip to product information
1 of 3

Schneider Electric BMXDRA0805H Modicon X80 Discrete Output Module

18 in stock
  • Manufacturer: Schneider
  • Product No.: BMXDRA0805H
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Output Module
  • Condition: Brand New
  • Payment: T/T, Western Union
  • Weight: 0.145 kg
  • Shipping port: Xiamen
  • Warranty: 12 months
  • Description
  • Reviews
  • Shipping & Payment

The Schneider Electric BMXDRA0805H is an 8-channel normally open (NO) relay discrete output module designed for the Modicon X80 common I/O platform, supporting Modicon M580 and Modicon M340 Programmable Automation Controllers (PAC). Engineered with conformal coating and an extended operating temperature range of -25 deg C to +70 deg C, this ruggedized module switches 24 to 240 V AC and 24 V DC loads in severe industrial environments.

Output Switching and Electrical Performance

The BMXDRA0805H provides 8 normally open relay output channels configured with positive discrete output logic. It accommodates a nominal load voltage range of 24 to 240 V AC (19 to 264 V AC operating limits) and 12 to 24 V DC (10 to 34 V DC operating limits), requiring a minimum switching load of 10 mA at 5 V DC to ensure reliable contact closure.

Backplane power draw is 79 mA typical at 3.3 V DC. Output switching response times are less than 10 ms for activation and less than 8 ms for deactivation, making the module suitable for general relay control of solenoids, contactors, and pilot indicators. Channel-to-bus isolation is rated at 2000 V AC (50/60 Hz for 1 minute) with an insulation resistance exceeding 10 MOhm at 500 V DC.

Ruggedized Construction and Environmental Ratings

The "H" suffix designates the hardened version featuring conformal coating on the internal printed circuit boards. This protective treatment enables continuous operation from -25 deg C to +70 deg C and up to 95% non-condensing relative humidity at 55 deg C.

The IP20-rated housing is qualified against corrosive and particulate contaminants under standard industrial classifications:

  • Gas resistance: Class Gx and Class 3C4
  • Dust and sand resistance: Class 3S4
  • Salt mist resistance: Level 2
  • Mold growth and fungal spore resistance: Class 3B2

Lifecycle Status and Replacement

Schneider Electric discontinued the BMXDRA0805H on July 1, 2022, with end-of-service scheduled for June 30, 2030. The official direct replacement is the Schneider Electric BMXDRA0815H, which retains the 8 NO relay output form factor and conformal coating while expanding the nominal DC switching capability to 24 to 125 V DC.

Technical Specifications

Parameter Specification
Model BMXDRA0805H
Brand Schneider Electric
Product Series Modicon X80
Product Type Discrete Output Module
Compatible Controllers Modicon M580, Modicon M340
Number of Outputs 8 NO Relay Outputs
Output Logic Positive
Nominal Output Voltage 24 to 240 V AC / 12 to 24 V DC
Operating Voltage Range 19 to 264 V AC / 10 to 34 V DC
Minimum Switching Current 10 mA at 5 V DC
Backplane Current Consumption 79 mA typical at 3.3 V DC
Output Response Time < 10 ms (activation), < 8 ms (deactivation)
Dielectric Strength 2000 V AC at 50/60 Hz for 1 min
Insulation Resistance > 10 MOhm at 500 V DC
MTBF 2,119,902 hours
Protective Treatment Conformal coating
Operating Temperature -25 deg C to +70 deg C
Relative Humidity 5% to 95% at 55 deg C (without condensation)
Enclosure Protection IP20
Certifications ATEX, CE, CSA, EAC, IECEx, Merchant Navy, RCM, UL
Standards Compliance EN 61131-2, EN 61000-6-4, EN 61000-6-2, EN 61010-2-201
Net Weight 0.145 kg

Frequently Asked Questions

Q: What is the difference between the BMXDRA0805H and the standard BMXDRA0805?A: The "H" suffix indicates a hardened version with conformal coating, extending the operating temperature range to -25 deg C to +70 deg C and adding resistance to corrosive gases (Gx, 3C4), dust/sand (3S4), salt (Level 2), and mold/fungi (3B2).

Q: Can the BMXDRA0805H be replaced directly by the BMXDRA0815H?A: Yes. Schneider Electric designates the BMXDRA0815H as the official replacement for the discontinued BMXDRA0805H, offering the same 8 NO relay outputs and severe-environment coating while supporting an expanded 24 to 125 V DC load range.

Q: What is the minimum load required for reliable relay switching on the BMXDRA0805H?A: Each relay output requires a minimum switching current of 10 mA at 5 V DC to maintain proper contact reliability.

Payment: T/T, Western Union.

Shipping port: Xiamen.

Lead time: Typically 1–3 working days after payment confirmation (subject to stock).

Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.

F.A.Q.

Common questions about quotes, shipping, warranty and returns

Click Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.

In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.

Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.

We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.

Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.

Products FAQs

You may also like