
Notified by email when this product becomes available
- Description
- Reviews
- Shipping & Payment
The Schneider Electric BMXEHC0800 is a high-speed counter module for the Modicon X80 automation platform. It provides 8 counting channels with a maximum counting frequency of 10 kHz and supports single-mode and dedicated two-phase counting configurations. The module accepts 24 VDC input signals and processes counting, frequency measurement, and encoder-related signals for PLC control applications.
Product Function and Counting Capabilities
The BMXEHC0800 processes high-speed input pulses that may exceed the practical counting capability of standard PLC digital inputs. It supports several counting functions, allowing the controller to monitor pulse events, measure frequency, and track incremental changes in position or movement.
Supported counting functions include:
- Forward and reverse counting.
- 32-bit up-counting.
- Down-counting.
- Modulo (loop) counting.
- Event counting.
- Frequency measurement.
The module supports a maximum counting frequency of 10 kHz. Its 5 ms cycle time is a separate timing parameter and should not be interpreted as the maximum input pulse period.
Input Signals and Sensor Compatibility
The module operates with 24 VDC Type 3 inputs. Compatible signal sources include 2-wire and 3-wire proximity sensors rated for 19.2-30 V, as well as incremental encoders with 10-30 V push-pull outputs.
The guaranteed logic thresholds define the input signal recognition limits:
- Logic 1: 11-30 VDC, with an input current greater than 2 mA at U >= 11 V.
- Logic 0: 5 VDC, with an input current below 1.5 mA.
These thresholds help determine whether a connected sensor or encoder provides sufficient voltage and current for reliable signal recognition.
Electrical Connection and Power Requirements
The BMXEHC0800 uses one 20-pin connector for field signal connections. Its internal power consumption is specified separately for the 3.3 VDC backplane bus and the 24 VDC sensor supply.
The stated current consumption is 200 mA from the 3.3 VDC bus and 80 mA from the 24 VDC sensor supply. These values should be considered separately when checking the power budget of the X80 rack and the connected sensor circuit.
Installation and Environmental Conditions
The module is designed for installation in a Modicon X80 module rack and is secured using two screws. Its IP20 enclosure protects the electronic components against contact with fingers and solid objects of the specified size, but does not provide protection against water ingress.
The operating temperature range is 0 to 60 deg C, with a relative humidity range of 10-95%, non-condensing. The specified insulation voltage is 1500 V for 60 seconds.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXEHC0800 |
| Brand | Schneider Electric |
| Product Type | High-Speed Counter Module |
| Product Family | Modicon X80 |
| Automation Platforms | Modicon M340 / Modicon M580 |
| Number of Channels | 8 |
| Maximum Counting Frequency | 10 kHz |
| Number of Inputs | 2 single-mode; 3 dedicated two-phase mode |
| Input Type | High-speed, 24 VDC Type 3 |
| Input Voltage | 24 VDC |
| Input Voltage Limits | 24 VDC |
| Input Current | 4.5 mA |
| Guaranteed Logic 1 Voltage | 11-30 VDC |
| Guaranteed Logic 1 Current | Greater than 2 mA at U >= 11 V |
| Guaranteed Logic 0 Voltage | 5 VDC |
| Guaranteed Logic 0 Current | Less than 1.5 mA |
| Sensor Compatibility | 19.2-30 VDC 2-wire/3-wire proximity sensors |
| Encoder Compatibility | 10-30 V push-pull incremental encoders |
| Counting Functions | Forward/reverse, 32-bit up-counting, down-counting, modulo, event counting, frequency measurement |
| Cycle Time | 5 ms |
| Insulation Voltage | 1500 V for 60 s |
| Electrical Connection | 1 x 20-pin connector |
| Backplane Current Consumption | 200 mA at 3.3 VDC |
| Sensor Supply Current Consumption | 80 mA at 24 VDC |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Product Weight | 0.113 kg |
| Coating | Standard version |
| EAN | 3595863910131 |
| EU Directives | 2014/35/EU; 2014/30/EU |
Frequently Asked Questions
Q: What is the maximum counting frequency of the BMXEHC0800?
A: The module supports a maximum counting frequency of 10 kHz. This allows it to process pulse signals from compatible proximity sensors and incremental encoders for high-speed counting applications.
Q: Which sensors and encoders can be connected to the BMXEHC0800?
A: It supports 2-wire and 3-wire proximity sensors operating at 19.2-30 VDC and incremental encoders with 10-30 V push-pull outputs. The connected signal source must also meet the specified logic voltage and current thresholds.
Q: What power requirements should be considered when installing this module?
A: The BMXEHC0800 requires 200 mA from the 3.3 VDC backplane bus and 80 mA from the 24 VDC sensor supply. Both values should be included when checking rack power capacity and sensor supply requirements.
Payment: T/T, Western Union.
Shipping port: Xiamen.
Lead time: Typically 1–3 working days after payment confirmation (subject to stock).
Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.
F.A.Q.
Common questions about quotes, shipping, warranty and returnsClick Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.
In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.
Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.
We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.
Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.
You may also like
Blog Posts
Industrial automation news, technical guides, and product updates.
