
Notified by email when this product becomes available
- Description
- Reviews
- Shipping & Payment
The Schneider Electric BMXFTA300, also cataloged as the BMXFTA300 prefabricated cable assembly, provides the electrical connection between Modicon M340 I/O modules and Advantys Telefast ABE 7 terminal blocks. It uses a 28-pin removable terminal block connector on the module side and a 25-pin SUB-D connector on the terminal block side, with a cable length of 3 m.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | BMXFTA300 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Prefabricated Cable Assembly |
| Accessory Type | Preformed Cable Set |
| Weight | 0.5 kg |
| Cable Length | 3 m |
| Module-Side Connection | 1 removable 28-pin terminal block |
| Terminal Block-Side Connection | 1 SUB-D 25-pin connector |
| Connector Configuration | 28-pin terminal block to 25-pin SUB-D |
| Compatible I/O Modules | BMXAMI0800, BMXAMI0810 |
| Compatible Terminal Blocks | ABE7CPA02, ABE7CPA03, ABE7CPA31, ABE7CPA31/E |
| Packaging Quantity | 1 unit |
| EAN | 3595864080451 |
I/O Connection Architecture and Compatibility
The BMXFTA300 provides a preassembled electrical interface between Modicon M340 analog I/O modules and Advantys Telefast ABE 7 connection systems.
Its connection arrangement consists of:
- Module side: A removable 28-pin terminal block connects to the I/O module.
- Terminal block side: A 25-pin SUB-D connector connects to the ABE 7 terminal block.
- Cable assembly: A fixed 3 m cable carries the corresponding electrical connections between both interfaces.
The cable is specified for the BMXAMI0800 and BMXAMI0810 analog input modules. Compatibility also includes the ABE7CPA02, ABE7CPA03, ABE7CPA31, and ABE7CPA31/E terminal block references.
For system integration, connector pin assignments and channel wiring must correspond to the selected I/O module and terminal block configuration.
Frequently Asked Questions
Q: Can the BMXFTA300 be used with both BMXAMI0800 and BMXAMI0810?
A: Yes. Both analog input modules are explicitly listed as compatible products. The cable provides the 28-pin terminal block interface required on the module side.
Q: Does the BMXFTA300 support hot-swapping?
A: Hot-swapping capability is not specified for this cable assembly. Disconnect the associated electrical circuits and follow the module manufacturer's maintenance procedure before removing or installing connectors.
Q: What should be checked when replacing an existing BMXFTA300?
A: Verify the 28-pin removable terminal block, 25-pin SUB-D connector, 3 m cable length, and compatibility with the installed ABE 7 terminal block. Check connector condition and wiring continuity before returning the I/O circuit to service.
Field Installation Guidelines
1. Connector Verification: Confirm that the 28-pin removable terminal block matches the designated Modicon I/O module interface and that the 25-pin SUB-D connector matches the ABE 7 terminal block.
2. Cable Routing: Route the 3 m cable away from high-voltage power conductors, motor cables, and sources of electromagnetic interference where practical.
3. Mechanical Installation: Avoid excessive bending, tensile loading, twisting, or compression of the cable. Secure the assembly to prevent connector strain.
4. Electrical Inspection: Inspect connector contacts for oxidation, contamination, or mechanical damage before installation.
5. Shielding and Grounding: Follow the module and terminal block installation documentation for cable shielding and grounding arrangements. Do not assume an undocumented shield termination configuration.
6. Commissioning: Verify connector engagement, wiring continuity, channel correspondence, and analog input signal readings before placing the associated control loop into operation.
Payment: T/T, Western Union.
Shipping port: Xiamen.
Lead time: Typically 1–3 working days after payment confirmation (subject to stock).
Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.
F.A.Q.
Common questions about quotes, shipping, warranty and returnsClick Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.
In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.
Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.
We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.
Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.
You may also like
Blog Posts
Industrial automation news, technical guides, and product updates.
