
Notified by email when this product becomes available
- Description
- Reviews
- Shipping & Payment
The Schneider Electric BMXNOM0200H is a rugged serial communication module in the Modicon X80 range, designed to provide two independent RS-232/RS-485 interfaces for Modbus RTU and ASCII communication. It supports serial connections to external devices through RJ45 ports and features a protective coating for operation in demanding industrial environments. Its extended operating temperature range and compatibility with Modicon M340 and M580 PLC platforms support its use in different automation architectures.
Serial Communication Interfaces
The BMXNOM0200H provides two serial communication ports with different electrical interfaces and transmission rates:
- RS-232: RJ45 connection, 115.2 kbit/s, 8-wire interface.
- RS-485: RJ45 connection, 57.6 kbit/s, one twisted two-wire pair.
These interfaces allow the PLC system to exchange data with external equipment using supported serial communication protocols. Modbus RTU uses binary data frames, while ASCII mode uses character-based message representation. The two interfaces provide separate connection points for serial communication devices.
Power Supply and Status Indication
The module receives its operating power internally through the module rack, rather than requiring a separate external power supply. Its current consumption is 80 mA at 24 V DC.
Four LEDs provide local diagnostic information:
- ERR: Red LED indicating a module fault.
- RUN: Green LED indicating normal module operation.
- SER COM 0: Green LED indicating activity on serial port 0.
- SER COM 1: Green LED indicating activity on serial port 1.
These indicators help maintenance personnel distinguish module operating status from serial communication activity during troubleshooting.
Rugged Design and Environmental Protection
The BMXNOM0200H features a protective coating intended for installations exposed to chemically aggressive environments. Its environmental specifications include resistance classifications for gases, dust, sand, salt, mould and fungal spores.
The module supports an operating temperature range of -25 to 70 deg C and relative humidity of 10-95%, provided that condensation does not occur. Its IP20 enclosure rating is intended for installation inside a suitable protected electrical cabinet.
PLC Platform Compatibility
The BMXNOM0200H belongs to the Modicon X80 common module platform and is specified for use with Modicon M340 and M580 PLC systems. The shared X80 hardware environment allows the serial communication module to be incorporated into these supported automation architectures.
The module is a standard-format X80 module. Its compatibility should be checked against the selected PLC configuration and rack arrangement before installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNOM0200H |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Serial Communication Module |
| Application | Rugged industrial environments |
| Communication Interfaces | 2 serial ports |
| Port 0 Interface | RS-232 |
| Port 0 Connector | RJ45, 8-wire |
| Port 0 Transmission Rate | 115.2 kbit/s |
| Port 1 Interface | RS-485 |
| Port 1 Connector | RJ45, twisted two-wire pair |
| Port 1 Transmission Rate | 57.6 kbit/s |
| Communication Protocols | Modbus RTU, ASCII |
| Power Supply | Internal, through module rack |
| Current Consumption | 80 mA at 24 V DC |
| Protective Coating | Protective lacquer coating |
| Local Diagnostics | ERR, RUN, SER COM 0, SER COM 1 LEDs |
| Module Format | Standard |
| Compatible PLC Platforms | Modicon M340, Modicon M580 |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Protection Rating | IP20 |
| Gas Resistance | Class Gx, ISA S71.04 |
| Gas Resistance | Class 3C4, IEC 60721-3-3 |
| Dust Resistance | Class 3S4, IEC 60721-3-3 |
| Sand Resistance | Class 3S4, IEC 60721-3-3 |
| Salt Resistance | Level 2, IEC 68252 |
| Mould Resistance | Class 3B2, IEC 60721-3-3 |
| Fungal Spore Resistance | Class 3B2, IEC 60721-3-3 |
| Hazardous Area Classification | Class I, Division 2 |
| Product Certifications | CE, UL, CSA, RCM, EAC, Marine, ATEX, IECEx |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201 |
| Additional Environmental Standards | IEC 61000-6-5, IEC 61850-3, IEC 60079-0, IACS E10 |
| EU Directives | 2014/35/EU, 2014/30/EU, 2014/34/EU |
| Protection Against Electromagnetic Disturbances | IEC 61000-6-2 |
| Weight | 0.23 kg |
| EAN | 3595864027388 |
| Lifecycle Carbon Footprint | 102 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between the two serial ports on the BMXNOM0200H?
A: Port 0 uses RS-232 with an RJ45 connector and supports transmission rates up to 115.2 kbit/s. Port 1 uses RS-485 with an RJ45 connector and a twisted two-wire connection, supporting up to 57.6 kbit/s. These interfaces provide different electrical connection methods for serial communication equipment.
Q: Which PLC systems support the BMXNOM0200H?
A: The module is specified for Modicon M340 and Modicon M580 PLC platforms. It belongs to the shared Modicon X80 hardware range. The rack configuration and applicable hardware requirements should be checked before selecting the module.
Q: Does the BMXNOM0200H require a separate 24 V DC power supply?
A: No separate external supply is specified for the module itself. It receives power internally through the module rack and has a stated current consumption of 80 mA at 24 V DC.
Payment: T/T, Western Union.
Shipping port: Xiamen.
Lead time: Typically 1–3 working days after payment confirmation (subject to stock).
Worldwide delivery: We ship industrial automation parts to customers around the world. Freight is quoted with your RFQ.
F.A.Q.
Common questions about quotes, shipping, warranty and returnsClick Request a Quote on the product page and send us the part number, required quantity, and destination country. Our sales team will reply with current availability, pricing, and estimated delivery time.
In-stock items are normally prepared after payment and order confirmation. Most orders are dispatched from our warehouse in China, although the shipping location may vary depending on current stock.
Yes. We ship industrial automation parts to customers worldwide. Shipping cost and transit time depend on the destination, package weight, product size, and local import requirements.
We commonly use DHL, FedEx, UPS, and other international courier services. The carrier can be selected according to the destination, delivery speed, shipment size, and customer requirements.
Our products are generally covered by a 12-month warranty. Eligible products may also be returned under our 30-day refund policy. Please contact our team before returning any item to confirm the applicable terms and return instructions.
You may also like
Blog Posts
Industrial automation news, technical guides, and product updates.
