
Veți fi notificat(ă) prin e-mail când acest produs devine disponibil
- Descriere
- Reviews
- Livrare și plată
The GE IC200ALG320E is a 12-bit analog current output module for the VersaMax distributed I/O system. It provides four single-ended output channels, each delivering a 4-20 mA signal to external control devices. The module uses an external DC supply for its field-side outputs and supports selectable output behavior when normal backplane communication or power is interrupted.
Output Function and Signal Processing
The IC200ALG320E converts digital output data received from the VersaMax CPU or Network Interface Unit (NIU) into analog current signals. Its four output channels operate as current-sourcing outputs and are arranged in one group.
The 4-20 mA signal range supports analog control loops connected to devices such as positioners, control valves, and other current-operated equipment. Each channel receives its own output data, allowing the controller to command multiple field devices through one module.
Output Configuration and Failure Behavior
The module provides a jumper-selectable response for conditions such as loss of backplane power, interruption of communication, or a stopped controller. The outputs can be configured to return to a default value of 4 mA or hold their last output state.
This setting determines how connected equipment responds when normal output updates are unavailable. The configured behavior should therefore be checked before replacing an existing module, particularly where the analog output controls a process actuator.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | IC200ALG320E |
| Brand | GE |
| Series | VersaMax |
| Product Type | Analog Output Module |
| Number of Channels | 4 |
| Channel Configuration | Single-ended, one group |
| Output Signal | Current |
| Output Range | 4-20 mA |
| Resolution | 4 uA = 8 counts |
| Update Rate | 0.3 ms maximum |
| Accuracy at 25 deg C | +/-0.3% typical of full scale; +/-0.5% maximum |
| External Power Supply | 18-30 VDC, including ripple |
| External Current Consumption | 160 mA maximum, including load current |
| Backplane Current Consumption | 50 mA maximum at 5 V |
| Output Default Configuration | 4 mA or hold last state |
| LED Indicators | FLD PWR, OK |
| Dimensions | 10.9 x 6.4 x 5.8 cm |
| Weight | 0.2 kg |
Revision E Identification
The suffix E identifies a revision of the original IC200ALG320 module. Revision E features an improved latching mechanism compared with earlier versions. When sourcing a replacement, check the complete catalog number and mechanical retention arrangement rather than identifying the module only by its base number.
Installation and Field Wiring
The module requires a VersaMax I/O carrier and an external 18-30 VDC supply for its output circuits. Shielded twisted-pair cable is recommended for analog field connections to help limit electrical interference in the current signal wiring.
The FLD PWR LED indicates the presence of field-side power, while the OK LED indicates that backplane power is recognized. These indicators help distinguish a field power issue from a backplane power issue during maintenance.
Frequently Asked Questions
Q: What is the difference between IC200ALG320E and IC200ALG320?
A: Both belong to the same four-channel, 12-bit, 4-20 mA analog output module family. The IC200ALG320E is Revision E and features an improved latching mechanism.
Q: What happens to the outputs if backplane communication is interrupted?
A: The outputs follow the configured jumper setting. They can return to the 4 mA default value or retain their last output state. Verify the existing configuration before replacing the module.
Q: Does the IC200ALG320E require an external power supply?
A: Yes. Its analog output circuits require an external 18-30 VDC supply. The module also draws current from the 5 V backplane supply, so both power requirements must be considered when checking the installation.
Plată: T/T, Western Union.
Port de expediere: Xiamen.
Termen de livrare: De obicei, 1–3 zile lucrătoare după confirmarea plății (în funcție de disponibilitatea stocului).
Livrare în întreaga lume: Expediem componente de automatizare industrială clienților din întreaga lume. Costul transportului este calculat împreună cu solicitarea dvs. de ofertă.
Întrebări frecvente
Întrebări frecvente despre oferte, livrare, garanție și retururiFaceți clic pe Solicită o ofertă pe pagina produsului și trimiteți-ne numărul piesei, cantitatea necesară și țara de destinație. Echipa noastră de vânzări vă va răspunde cu informații despre disponibilitatea actuală, preț și timpul estimat de livrare.
Articolele aflate în stoc sunt, de obicei, pregătite după efectuarea plății și confirmarea comenzii. Majoritatea comenzilor sunt expediate din depozitul nostru din China, deși locația expedierii poate varia în funcție de stocul disponibil în prezent.
Da. Expediem componente pentru automatizări industriale clienților din întreaga lume. Costul transportului și timpul de livrare depind de destinație, greutatea coletului, dimensiunea produsului și cerințele locale de import.
Folosim în mod obișnuit DHL, FedEx, UPS și alte servicii internaționale de curierat. Transportatorul poate fi ales în funcție de destinație, viteza de livrare, dimensiunea expedierii și cerințele clientului.
Produsele noastre sunt, în general, acoperite de o garanție de 12 luni. Produsele eligibile pot fi, de asemenea, returnate în conformitate cu politica noastră de rambursare în termen de 30 de zile. Vă rugăm să contactați echipa noastră înainte de a returna orice produs pentru a confirma condițiile aplicabile și instrucțiunile de returnare.
S-ar putea să-ți placă și acestea
Articole de blog
Știri despre automatizarea industrială, ghiduri tehnice și actualizări ale produselor.
