
Veți fi notificat(ă) prin e-mail când acest produs devine disponibil
- Descriere
- Reviews
- Livrare și plată
The Schneider BMXCPS4002H is a ruggedized power supply module in the Modicon X80 range, designed for redundant power architectures in industrial control systems. It accepts a 100-240 V AC primary supply and provides separate 3.3 V DC and 24 V DC outputs for I/O module logic and module or processor power. Its extended operating temperature range of -25 to 70 deg C supports installations exposed to demanding environmental conditions.
Power Supply Architecture and Output Capacity
The BMXCPS4002H provides two secondary power outputs for the Modicon X80 backplane:
- 3.3 V DC: 5.5 A, with an output power of 18 W for I/O module logic.
- 24 V DC: 1.67 A, with an output power of 40 W for I/O module power and processor supply, with the 3.3 V output unloaded.
These outputs serve different power requirements within the control rack. The available output capacity must be considered when calculating the total power demand of installed modules, particularly when the 24 V DC output and processor supply are used together.
The module supports redundant power architectures and includes redundancy monitoring. Its diagnostic functions include remaining operating life information, temperature monitoring, redundancy testing and operating-time information, with extended diagnostics available over the network.
Input Protection and Electrical Characteristics
The primary input accepts a nominal voltage range of 100-240 V AC, with an allowable input range of 85-264 V AC. It operates at 50/60 Hz, with an acceptable frequency range of 47-63 Hz.
The secondary circuits include overload, overvoltage and short-circuit protection. The primary circuit also has internal protection that is not accessible to the user. These protection functions address different fault conditions on the input and output sides of the power supply.
The module has a maximum power dissipation of 8.5 W. Its inrush current reaches 30 A at 120 V and 60 A at 240 V, which should be considered when evaluating upstream circuit protection and power distribution.
Connections, Indicators and Reset
The BMXCPS4002H uses separate removable terminal blocks for power input and alarm relay connections:
- One 5-pin connector for AC power supply and protective earth.
- One 2-pin connector for the alarm relay.
- Two removable cage-type terminal blocks, with 5-way and 2-way configurations, included with the module.
Three green LEDs indicate voltage availability, redundancy status and power supply status. A RESET button provides a cold-start function.
The primary-to-ground and primary-to-secondary insulation resistance is at least 100 MOhm. The specified interruption immunity is 1 ms, and the insulation withstand voltage varies according to the relevant circuit pair.
Installation and Environmental Conditions
The power supply is designed for installation in a Modicon X80 module rack and is secured with two screws. Its IP20 protection rating applies to the specified enclosure protection level and does not indicate suitability for direct exposure to water or dust.
The ruggedized construction includes a protective coating and environmental resistance characteristics:
- Operating temperature: -25 to 70 deg C.
- Storage temperature: -40 to 85 deg C.
- Relative humidity: 5-95% at 55 deg C, without condensation.
- Operating altitude: 0-2,000 m; derating applies from 2,000 to 5,000 m.
- Vibration resistance: 3 Gn.
- Shock resistance: 30 Gn.
- Gas resistance: Class Gx according to ISA S71.04 and Class 3C4 according to IEC 60721-3-3.
- Dust and sand resistance: Class 3S4 according to IEC 60721-3-3.
The specified environmental characteristics make this version suitable for installations requiring a wider operating temperature range and additional environmental resistance compared with standard indoor power supply configurations.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS4002H |
| Brand | Schneider Electric |
| Product Type | Modicon X80 Power Supply Module |
| Product Range | Modicon X80 |
| Application | Ruggedized power supply for redundant architectures |
| Backplane Compatibility | All module racks |
| Primary Supply Voltage | 100-240 V AC |
| Allowable Input Voltage | 85-264 V AC |
| Supply Frequency | 50/60 Hz |
| Frequency Limits | 47-63 Hz |
| Apparent Power | 0.13 kVA |
| Input Current | 0.55 A at 240 V; 1.01 A at 115 V |
| Inrush Current | 30 A at 120 V; 60 A at 240 V |
| 3.3 V DC Output | 5.5 A, 18 W |
| 24 V DC Output | 1.67 A, 40 W |
| Maximum Power Dissipation | 8.5 W |
| Protection | Secondary overload, overvoltage and short-circuit protection |
| Redundancy | Redundant power architecture support |
| Diagnostics | Network diagnostics, temperature monitoring and redundancy testing |
| Status Indicators | 3 green LEDs |
| Reset | Cold-start RESET button |
| Electrical Connections | 1 x 5-pin power connector; 1 x 2-pin alarm relay connector |
| Insulation Resistance | At least 100 MOhm |
| Dielectric Strength | 1,500 V primary/secondary; 1,500 V primary/earth; 2,300 V sensor supply circuit |
| MTBF | 792,000 h |
| Interruption Immunity | 1 ms |
| Mounting | Modicon X80 module rack, secured with 2 screws |
| Protection Rating | IP20 |
| Operating Temperature | -25 to 70 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 Gn |
| Protective Coating | Conformal protective coating |
| Operating Altitude | 0-2,000 m; derating from 2,000 to 5,000 m |
| Hazardous Area Classification | Class I, Division 2 |
| Product Certifications Listed | CE, UL, CSA, RCM, EAC, Merchant Navy |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10, EN/IEC 61000-6-5, EN/IEC 61850-3 |
| Weight | 0.51 kg |
| EAN | 3606480927577 |
| Environmental Carbon Footprint | 495 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between BMXCPS4002H and a standard Modicon X80 power supply?
A: The BMXCPS4002H is the ruggedized version intended for demanding environmental conditions and redundant power architectures. Its specified operating temperature range is -25 to 70 deg C, and it includes environmental resistance characteristics for industrial installations.
Q: Can the BMXCPS4002H supply both the I/O logic and processor power?
A: Yes. It provides separate 3.3 V DC and 24 V DC outputs. The 3.3 V output supplies I/O module logic, while the 24 V output supplies I/O modules and the processor. The specified 40 W capacity at 24 V DC assumes the 3.3 V output is unloaded.
Q: What connections are provided for the power supply and alarm relay?
A: The module has a 5-pin connector for the AC supply and protective earth, together with a 2-pin connector for the alarm relay. Both removable cage-type terminal blocks are included with the power supply.
Plată: T/T, Western Union.
Port de expediere: Xiamen.
Termen de livrare: De obicei, 1–3 zile lucrătoare după confirmarea plății (în funcție de disponibilitatea stocului).
Livrare în întreaga lume: Expediem componente de automatizare industrială clienților din întreaga lume. Costul transportului este calculat împreună cu solicitarea dvs. de ofertă.
Întrebări frecvente
Întrebări frecvente despre oferte, livrare, garanție și retururiFaceți clic pe Solicită o ofertă pe pagina produsului și trimiteți-ne numărul piesei, cantitatea necesară și țara de destinație. Echipa noastră de vânzări vă va răspunde cu informații despre disponibilitatea actuală, preț și timpul estimat de livrare.
Articolele aflate în stoc sunt, de obicei, pregătite după efectuarea plății și confirmarea comenzii. Majoritatea comenzilor sunt expediate din depozitul nostru din China, deși locația expedierii poate varia în funcție de stocul disponibil în prezent.
Da. Expediem componente pentru automatizări industriale clienților din întreaga lume. Costul transportului și timpul de livrare depind de destinație, greutatea coletului, dimensiunea produsului și cerințele locale de import.
Folosim în mod obișnuit DHL, FedEx, UPS și alte servicii internaționale de curierat. Transportatorul poate fi ales în funcție de destinație, viteza de livrare, dimensiunea expedierii și cerințele clientului.
Produsele noastre sunt, în general, acoperite de o garanție de 12 luni. Produsele eligibile pot fi, de asemenea, returnate în conformitate cu politica noastră de rambursare în termen de 30 de zile. Vă rugăm să contactați echipa noastră înainte de a returna orice produs pentru a confirma condițiile aplicabile și instrucțiunile de returnare.
S-ar putea să-ți placă și acestea
Articole de blog
Știri despre automatizarea industrială, ghiduri tehnice și actualizări ale produselor.
