
Veți fi notificat(ă) prin e-mail când acest produs devine disponibil
- Descriere
- Reviews
- Livrare și plată
The Schneider Electric BMXCPS4022 is a Modicon X80 power supply module designed for 24-48 VDC input and redundant power supply architectures. It provides separate 3.3 VDC and 24 VDC secondary outputs for I/O module logic and rack power requirements. The module includes secondary-circuit overload, overvoltage and short-circuit protection, network-accessible diagnostic functions, and dedicated redundancy status monitoring.
Power Supply Function and Redundancy
The BMXCPS4022 converts the DC primary supply into the secondary voltages required by the Modicon X80 rack. Its output configuration supports both I/O module logic and the 24 VDC supply requirements of the I/O modules and processor.
The module supports redundant power supply architectures. Its diagnostic functions include redundancy testing, temperature monitoring, operating time and remaining operating time. These functions provide maintenance personnel with information about the power supply condition and redundancy status.
Secondary Output Configuration
The power supply provides two secondary output circuits:
- 3.3 VDC output: 5.5 A, with an 18 W secondary power rating for I/O module logic at 0 to 60 deg C.
- 24 VDC output: 1.67 A, with a 40 W secondary power rating for I/O module power supply and processor operation at 3.3 V without load, at 0 to 60 deg C.
The secondary circuits incorporate overload, overvoltage and short-circuit protection. Maximum power dissipation is 8.5 W. These output ratings should be considered when checking the total rack power requirements and the connected module configuration.
Electrical Characteristics and Protection
The specified primary input range is 24-48 VDC, with an allowable primary voltage range of 18-62.4 VDC. Input current is 1.9 A at 24 V and 1 A at 48 V. The specified inrush current is 60 A at both input voltages, with corresponding I2t values of 0.4 A2.s at 24 V and 1.9 A2.s at 48 V.
Primary-circuit protection is internal and not accessible. The module also provides primary-to-ground and primary-to-secondary insulation resistance of at least 100 Mohm, with a dielectric strength of 1500 V for both insulation paths.
Indicators and Electrical Connections
Three green LED indicators provide operating information:
- Voltage presence (OK).
- Redundancy OK.
- Power supply status.
A RESET push button provides a cold-start reset function. Electrical connections consist of one 5-pin connector for the power supply and protective earth, and one 2-pin connector for the alarm relay. Two removable terminal blocks, with 5-way and 2-way connections, are included.
Installation and Environmental Conditions
The BMXCPS4022 is designed for installation in a Modicon X80 module rack and is secured with two screws. It has an IP20 protection rating and an operating temperature range of 0 to 60 deg C. The specified storage temperature range is -40 to 85 deg C.
The module supports relative humidity of 10-95%, without condensation. Its environmental specifications include 3C3 and 3C4 classifications according to IEC 60721-3-3. The specified immunity to interruptions is 1 ms.
Parameter | Specification
| Parameter | Specification |
|---|---|
| Model | BMXCPS4022 |
| Brand | Schneider Electric |
| Product Type | Redundant DC Power Supply Module |
| Product Range | Modicon X80 |
| Primary Input Voltage | 24-48 VDC |
| Primary Voltage Range | 18-62.4 VDC |
| Input Current | 1.9 A at 24 V; 1 A at 48 V |
| Inrush Current | 60 A at 24 V and 48 V |
| I2t at Switch-On | 0.4 A2.s at 24 V; 1.9 A2.s at 48 V |
| Secondary Output 1 | 3.3 VDC, 5.5 A, 18 W |
| Secondary Output 2 | 24 VDC, 1.67 A, 40 W |
| Operating Temperature for Rated Output | 0 to 60 deg C |
| Maximum Power Dissipation | 8.5 W |
| Redundancy | Supported |
| Diagnostic Functions | Redundancy test, temperature sensor, operating time and remaining operating time |
| Protection | Secondary overload, overvoltage and short-circuit protection |
| Status Indicators | 3 green LEDs |
| Reset Function | Cold-start RESET button |
| Alarm Connection | 1 x 2-pin connector |
| Power Connection | 1 x 5-pin connector, including protective earth |
| Insulation Resistance | >= 100 Mohm, primary/ground and primary/secondary |
| Dielectric Strength | 1500 V, primary/ground and primary/secondary |
| Interruption Immunity | 1 ms |
| Maximum Cable Distance Between Devices | 10 m / 15 m (connection-dependent values) |
| MTBF | 752,000 h |
| Mounting | Modicon X80 module rack, secured with 2 screws |
| Rack Compatibility | All module racks |
| Protection Rating | IP20 |
| Environmental Classification | 3C3 and 3C4 according to IEC 60721-3-3 |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Standards | EN 61131-2, EN 61000-6-4, EN 61000-6-2, EN 61010-2-201 |
| Product Directives | 2014/35/EU, 2014/30/EU |
| Product Weight | 0.81 kg |
| EAN | 3606481179074 |
| Lifecycle Carbon Footprint | 496 kg CO2 eq. |
Frequently Asked Questions
Q: Can the BMXCPS4022 be used in a redundant power supply architecture?
A: Yes. The BMXCPS4022 is designed for redundant power supply architectures. It includes redundancy monitoring and a dedicated green redundancy status LED. The actual redundant arrangement must follow the applicable Modicon X80 system configuration requirements.
Q: What is the difference between the 3.3 VDC and 24 VDC outputs?
A: The 3.3 VDC output supplies I/O module logic, while the 24 VDC output supplies the I/O module power circuit and supports processor operation under the specified no-load condition. Both outputs have separate current and power ratings that must be considered when checking rack power consumption.
Q: What should be checked when replacing an existing BMXCPS4022?
A: Verify the complete model number, 24-48 VDC input supply, secondary output requirements, rack configuration and redundant power arrangement. Also check the connector configuration and the power demand of the installed modules before replacement.
Plată: T/T, Western Union.
Port de expediere: Xiamen.
Termen de livrare: De obicei, 1–3 zile lucrătoare după confirmarea plății (în funcție de disponibilitatea stocului).
Livrare în întreaga lume: Expediem componente de automatizare industrială clienților din întreaga lume. Costul transportului este calculat împreună cu solicitarea dvs. de ofertă.
Întrebări frecvente
Întrebări frecvente despre oferte, livrare, garanție și retururiFaceți clic pe Solicită o ofertă pe pagina produsului și trimiteți-ne numărul piesei, cantitatea necesară și țara de destinație. Echipa noastră de vânzări vă va răspunde cu informații despre disponibilitatea actuală, preț și timpul estimat de livrare.
Articolele aflate în stoc sunt, de obicei, pregătite după efectuarea plății și confirmarea comenzii. Majoritatea comenzilor sunt expediate din depozitul nostru din China, deși locația expedierii poate varia în funcție de stocul disponibil în prezent.
Da. Expediem componente pentru automatizări industriale clienților din întreaga lume. Costul transportului și timpul de livrare depind de destinație, greutatea coletului, dimensiunea produsului și cerințele locale de import.
Folosim în mod obișnuit DHL, FedEx, UPS și alte servicii internaționale de curierat. Transportatorul poate fi ales în funcție de destinație, viteza de livrare, dimensiunea expedierii și cerințele clientului.
Produsele noastre sunt, în general, acoperite de o garanție de 12 luni. Produsele eligibile pot fi, de asemenea, returnate în conformitate cu politica noastră de rambursare în termen de 30 de zile. Vă rugăm să contactați echipa noastră înainte de a returna orice produs pentru a confirma condițiile aplicabile și instrucțiunile de returnare.
S-ar putea să-ți placă și acestea
Articole de blog
Știri despre automatizarea industrială, ghiduri tehnice și actualizări ale produselor.
