
Veți fi notificat(ă) prin e-mail când acest produs devine disponibil
- Descriere
- Reviews
- Livrare și plată
The Schneider Electric BMXDDM16025H is a Modicon X80 discrete I/O module with 8 DC inputs and 8 relay outputs. It combines 24 VDC input signal monitoring with relay-based output switching in a single module. Its conformal coating and severe-environment classification distinguish this version from standard-treatment configurations.
Input and Output Configuration
The module provides two different signal interfaces within one I/O unit:
- 8 discrete inputs: 24 VDC positive logic, current-sinking input type.
- 8 relay outputs: Isolated relay contacts for switching DC or AC loads.
- Input current: 3.5 mA per channel.
- Input impedance: 6,800 Ohm.
- Input channels cannot be connected in parallel.
The inputs receive signals from field sensors, while the relay outputs switch external loads through their respective output circuits. This arrangement allows the controller to monitor discrete field states and operate relay-controlled devices using the same module.
Input Signal Characteristics
The 24 VDC inputs support 2-wire and 3-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 3 requirements. The guaranteed input thresholds are:
- Logic state 1: At least 11 V and 2 mA.
- Logic state 0: Maximum 5 V and 1.5 mA.
- Typical response time: 4 ms.
- Maximum response time: 7 ms.
These thresholds define the signal levels required for reliable input-state recognition. The module also provides reverse-polarity protection on the input side.
Relay Output Characteristics
The eight relay outputs support both DC and AC switching applications.
- DC operating voltage: 19-30 VDC.
- AC operating voltage: 19-264 VAC.
- Maximum output current: 2 A.
- Output activation response:
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM16025H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete I/O Module |
| Application | Severe environments |
| Discrete Inputs | 8 |
| Input Voltage | 24 VDC |
| Input Type | Current sink, positive logic |
| Input Current | 3.5 mA |
| Input Impedance | 6,800 Ohm |
| Discrete Outputs | 8 |
| Output Type | Relay |
| DC Output Voltage | 19-30 VDC |
| AC Output Voltage | 19-264 VAC |
| Maximum Output Current | 2 A |
| Typical Input Response Time | 4 ms |
| Maximum Input Response Time | 7 ms |
| Output Activation Time | 10 MOhm at 500 VDC |
| Dielectric Strength | 1,500 VAC, primary/secondary; 2,830 VAC, output relay; 500 VDC, between I/O groups |
| External Input Fuse | 0.5 A fast-blow per input group |
| Output Protection | External fast-blow fuse per output channel or group |
| Protective Treatment | Conformal coating |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Environmental Protection | IP20 |
| Gas Resistance | Gx, 3C4 |
| Dust and Sand Resistance | 3S4 |
| Salt Resistance | Level 2 |
| Mold and Fungal Spore Resistance | 3B2 |
| Net Weight | 0.135 kg |
| Package Dimensions | 12.0 x 11.0 x 5.5 cm |
| Package Weight | 168 g |
| Lifecycle Carbon Footprint | 35 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between BMXDDM16025H and BMXDDM16025?
A: Both models provide 8 x 24 VDC positive logic inputs and 8 relay outputs. The BMXDDM16025H is the hardened version, featuring conformal coating and an extended operating temperature range of -25 to 70 deg C.
Q: Can the relay outputs switch both AC and DC loads?
A: Yes. The relay outputs support 19-30 VDC and 19-264 VAC operating ranges, with a maximum output current of 2 A. The connected load must remain within the applicable voltage and current ratings.
Q: Can the eight input channels be connected in parallel?
A: No. Input paralleling is not permitted. Each input channel should receive its own correctly wired field signal.
Plată: T/T, Western Union.
Port de expediere: Xiamen.
Termen de livrare: De obicei, 1–3 zile lucrătoare după confirmarea plății (în funcție de disponibilitatea stocului).
Livrare în întreaga lume: Expediem componente de automatizare industrială clienților din întreaga lume. Costul transportului este calculat împreună cu solicitarea dvs. de ofertă.
Întrebări frecvente
Întrebări frecvente despre oferte, livrare, garanție și retururiFaceți clic pe Solicită o ofertă pe pagina produsului și trimiteți-ne numărul piesei, cantitatea necesară și țara de destinație. Echipa noastră de vânzări vă va răspunde cu informații despre disponibilitatea actuală, preț și timpul estimat de livrare.
Articolele aflate în stoc sunt, de obicei, pregătite după efectuarea plății și confirmarea comenzii. Majoritatea comenzilor sunt expediate din depozitul nostru din China, deși locația expedierii poate varia în funcție de stocul disponibil în prezent.
Da. Expediem componente pentru automatizări industriale clienților din întreaga lume. Costul transportului și timpul de livrare depind de destinație, greutatea coletului, dimensiunea produsului și cerințele locale de import.
Folosim în mod obișnuit DHL, FedEx, UPS și alte servicii internaționale de curierat. Transportatorul poate fi ales în funcție de destinație, viteza de livrare, dimensiunea expedierii și cerințele clientului.
Produsele noastre sunt, în general, acoperite de o garanție de 12 luni. Produsele eligibile pot fi, de asemenea, returnate în conformitate cu politica noastră de rambursare în termen de 30 de zile. Vă rugăm să contactați echipa noastră înainte de a returna orice produs pentru a confirma condițiile aplicabile și instrucțiunile de returnare.
S-ar putea să-ți placă și acestea
Articole de blog
Știri despre automatizarea industrială, ghiduri tehnice și actualizări ale produselor.
