
Veți fi notificat(ă) prin e-mail când acest produs devine disponibil
- Descriere
- Reviews
- Livrare și plată
The Schneider Electric BMXDRA1605H is a 16-channel discrete relay output module in the Modicon X80 series. It provides normally open (NO) relay contacts for switching external AC or DC loads from a PLC control system. The module features a conformal coating, IP20 protection and an extended operating temperature range of -25 to 70 deg C for installations requiring additional environmental resistance.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRA1605H |
| Brand | Schneider Electric |
| Series | Modicon X80 |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 16 |
| Output Type | Normally Open (NO) relay contacts |
| Discrete Output Logic | Positive |
| Rated Switching Current | 3 A |
| Switching Voltage | 24-240 VAC / 24-48 VDC |
| Minimum Switching Load | 1 mA at 5 VDC |
| Output Response Time | Less than 8 ms (activation); 10 ms (deactivation) |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Dielectric Strength | 2000 VAC at 50/60 Hz for 1 minute |
| Protection Rating | IP20 |
| Protective Coating | Conformal coating |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| MTBF | 2,100,000 hours (source value; see editorial note) |
| Weight | 0.15 kg |
| EAN | 3595864025803 |
| Environmental Carbon Footprint | 148 kg CO2 eq. |
Relay Output Function
The BMXDRA1605H uses electromechanical relay contacts to switch external loads. The PLC controls the relay coils, while the relay contacts provide the switching path for the connected field circuits. Its 16 normally open outputs remain open when the corresponding relays are de-energized and close when activated.
The relay output arrangement supports both AC and DC switching within the specified voltage ranges. The minimum switching load of 1 mA at 5 VDC is a separate contact operating parameter and should not be confused with the maximum rated switching current.
Environmental Protection and Construction
This version has a conformal protective coating intended for environments with specified resistance requirements. The manufacturer lists gas resistance classifications Gx and 3C4, dust and sand resistance classifications 3S4, salt resistance Level 2, and mould resistance Class 3B2.
The IP20 rating describes protection against access to hazardous parts and solid foreign objects. It does not indicate protection against water ingress. The extended temperature range and environmental classifications should be considered when checking suitability for the actual control cabinet installation.
PLC Platform and Installation
The BMXDRA1605H belongs to the common Modicon X80 I/O platform used with Modicon M340 and Modicon M580 programmable automation controllers. It can be installed in local or remote I/O configurations, subject to the applicable rack and system configuration requirements.
The module uses a removable 20-pin terminal block for field wiring. Installation requires mounting the module on the appropriate rack and securing it with two screws. Compatible terminal block connection options include cage-clamp, screw-clamp and removable spring-clamp types.
Frequently Asked Questions
Q: What is the difference between BMXDRA1605H and BMXDRA1605?
A: Both references belong to the Modicon X80 16-channel relay output family. The BMXDRA1605H is the ruggedized version with conformal coating and an extended operating temperature range for more demanding environmental conditions.
Q: Which PLC platforms support the BMXDRA1605H?
A: The module is specified for Modicon M340 and Modicon M580 PLC platforms, including local and remote I/O configurations. The appropriate rack and terminal block must be selected for the installation.
Q: What protection should be considered when wiring the relay outputs?
A: Output circuit protection is required. Schneider Electric documentation specifies fast-acting fuses for output protection and recommends suitable discharge or suppression components according to the AC or DC load type. Verify the wiring diagram and load conditions before commissioning.
Plată: T/T, Western Union.
Port de expediere: Xiamen.
Termen de livrare: De obicei, 1–3 zile lucrătoare după confirmarea plății (în funcție de disponibilitatea stocului).
Livrare în întreaga lume: Expediem componente de automatizare industrială clienților din întreaga lume. Costul transportului este calculat împreună cu solicitarea dvs. de ofertă.
Întrebări frecvente
Întrebări frecvente despre oferte, livrare, garanție și retururiFaceți clic pe Solicită o ofertă pe pagina produsului și trimiteți-ne numărul piesei, cantitatea necesară și țara de destinație. Echipa noastră de vânzări vă va răspunde cu informații despre disponibilitatea actuală, preț și timpul estimat de livrare.
Articolele aflate în stoc sunt, de obicei, pregătite după efectuarea plății și confirmarea comenzii. Majoritatea comenzilor sunt expediate din depozitul nostru din China, deși locația expedierii poate varia în funcție de stocul disponibil în prezent.
Da. Expediem componente pentru automatizări industriale clienților din întreaga lume. Costul transportului și timpul de livrare depind de destinație, greutatea coletului, dimensiunea produsului și cerințele locale de import.
Folosim în mod obișnuit DHL, FedEx, UPS și alte servicii internaționale de curierat. Transportatorul poate fi ales în funcție de destinație, viteza de livrare, dimensiunea expedierii și cerințele clientului.
Produsele noastre sunt, în general, acoperite de o garanție de 12 luni. Produsele eligibile pot fi, de asemenea, returnate în conformitate cu politica noastră de rambursare în termen de 30 de zile. Vă rugăm să contactați echipa noastră înainte de a returna orice produs pentru a confirma condițiile aplicabile și instrucțiunile de returnare.
S-ar putea să-ți placă și acestea
Articole de blog
Știri despre automatizarea industrială, ghiduri tehnice și actualizări ale produselor.
