
Veți fi notificat(ă) prin e-mail când acest produs devine disponibil
- Descriere
- Reviews
- Livrare și plată
The Schneider Electric BMXERT1604T is a 16-channel multifunction input module in the Modicon X80 range, designed for Modicon M340 and M580 Programmable Automation Controllers (PACs). It accepts 24 V DC, 48-60 V DC, and 110-125 V DC process inputs and supports event recording with 1 ms time stamps. The module also provides configurable input filtering and time-code synchronization interfaces for applications requiring time-correlated event acquisition.
Functional Overview
The BMXERT1604T provides 16 discrete process inputs arranged in four groups of four channels. It acquires input state changes and supports time-stamped data recording, allowing the controller to correlate field events with their occurrence times.
Its multifunction capability includes two time synchronization protocols:
- DCF77: Supports synchronization using the DCF77 time signal.
- IRIG-B: Supports time synchronization using the IRIG-B time-code format.
- 1 ms time stamps: Provides millisecond-resolution event timestamps.
- Input filtering: Configurable anti-bounce filtering helps suppress unwanted transitions caused by contact bounce or short-duration input disturbances.
The sampling duration is 0.5 ms, with an acquisition time of 1 ms. These specifications describe different stages of input processing and should not be interpreted as a guaranteed end-to-end controller response time.
Input Configuration and Signal Processing
The module supports three rated DC input voltage classes. The applicable voltage range depends on the selected input circuit configuration and the actual field signal:
- 24 V DC: 19-30 V DC
- 48-60 V DC: 38-75 V DC
- 110-125 V DC: 88-156 V DC
The switching voltage and corresponding input current vary by voltage class. This distinction is important when checking compatibility with field contacts and external signal sources.
The configurable anti-bounce filter ranges from 0 to 255 ms. A shorter setting allows faster recognition of input transitions, while a longer setting provides more filtering against contact bounce. The selected filter value should reflect the characteristics of the connected field device and the required event detection behavior.
Time Stamping and Event Synchronization
The BMXERT1604T supports event recording with 1 ms time stamps. This allows changes in discrete process signals to be recorded with timing information, helping engineers analyze the sequence of events during process disturbances, equipment trips, and control-system diagnostics.
The module accepts external time synchronization signals through DCF77 and IRIG-B interfaces. These protocols provide a time reference for event records, which is particularly relevant when comparing events collected by multiple modules or distributed control-system components.
Electrical Characteristics and Isolation
The module has a maximum power consumption of 4 W for process inputs. Its current consumption is specified separately for the two supply rails: 30 mA at 24 V DC and 130 mA at 3.3 V DC.
The specified isolation ratings are:
- 2500 V DC for 60 seconds between the bus and discrete inputs.
- 1400 V DC for 60 seconds between the bus and IRIG/DCF interfaces.
- 2500 V DC for 60 seconds between discrete inputs and IRIG/DCF interfaces.
These ratings describe the specified insulation withstand conditions, rather than continuous operating voltages.
Installation and Diagnostics
The BMXERT1604T supports hot swapping. Its local LED indicators provide information about module operation, time-code input status, module faults, power supply interruption, and the individual states of all 16 inputs.
The module occupies 32 mm of rack width and measures 86 mm in depth and 100 mm in height. Its 28-pin removable terminal block is provided separately, so the required connection accessory should be checked when planning a replacement or new installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXERT1604T |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Multifunction Input Module |
| Number of Inputs | 16 discrete inputs |
| Channel Configuration | 4 groups of 4 process inputs |
| Rated Supply Voltage | 24 V DC (19-30 V DC) |
| Rated Supply Voltage | 48-60 V DC (38-75 V DC) |
| Rated Supply Voltage | 110-125 V DC (88-156 V DC) |
| Switching Voltage | 24 V at 6.7 mA |
| Switching Voltage | 48 V at 2.5 mA |
| Switching Voltage | 60 V at 2.5 mA |
| Switching Voltage | 110 V at 1.3 mA |
| Switching Voltage | 125 V at 1.3 mA |
| Data Recording | 1 ms time stamps |
| Time Synchronization Protocols | DCF77, IRIG-B |
| Anti-Bounce Filtering | Configurable from 0 to 255 ms |
| Sampling Duration | 0.5 ms |
| Acquisition Time | 1 ms |
| Maximum Power Consumption | 4 W |
| Current Consumption | 30 mA at 24 V DC; 130 mA at 3.3 V DC |
| Isolation Voltage | 2500 V DC, 60 s, bus to discrete input |
| Isolation Voltage | 1400 V DC, 60 s, bus to IRIG/DCF |
| Isolation Voltage | 2500 V DC, 60 s, discrete input to IRIG/DCF |
| Hot Swap | Supported |
| Width | 32 mm |
| Height | 100 mm |
| Depth | 86 mm |
| Operating Temperature | -25 to 70 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 95%, non-condensing |
| Maximum Operating Altitude | 4000 m |
| Local Diagnostics | RUN, T, ERR, I/O and 16 input status LEDs |
| Product Certifications | CE, RCM, CSA, EAC, Merchant Navy, UL |
| Standards | IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201 |
| Environmental Resistance | Gx, 3C4, 3S4, 3B2; salt resistance level 2 |
| Country of Origin | US |
| GTIN | 3595864146232 |
| Product Weight | 0.119 kg |
Frequently Asked Questions
Q: Can the BMXERT1604T record the sequence of discrete input events?
A: Yes. It supports 1 ms time-stamped data recording. DCF77 and IRIG-B provide external time synchronization references for event records.
Q: What input voltage levels can the BMXERT1604T accept?
A: It supports 24 V DC, 48-60 V DC, and 110-125 V DC input classes. The corresponding permitted voltage ranges are 19-30 V DC, 38-75 V DC, and 88-156 V DC. The field signal must match the selected input configuration.
Q: Is the BMXERT1604T supplied with its terminal block?
A: The 28-pin removable terminal block is specified as a separate accessory. The connection accessory must therefore be checked separately when ordering the module or preparing a replacement.
Plată: T/T, Western Union.
Port de expediere: Xiamen.
Termen de livrare: De obicei, 1–3 zile lucrătoare după confirmarea plății (în funcție de disponibilitatea stocului).
Livrare în întreaga lume: Expediem componente de automatizare industrială clienților din întreaga lume. Costul transportului este calculat împreună cu solicitarea dvs. de ofertă.
Întrebări frecvente
Întrebări frecvente despre oferte, livrare, garanție și retururiFaceți clic pe Solicită o ofertă pe pagina produsului și trimiteți-ne numărul piesei, cantitatea necesară și țara de destinație. Echipa noastră de vânzări vă va răspunde cu informații despre disponibilitatea actuală, preț și timpul estimat de livrare.
Articolele aflate în stoc sunt, de obicei, pregătite după efectuarea plății și confirmarea comenzii. Majoritatea comenzilor sunt expediate din depozitul nostru din China, deși locația expedierii poate varia în funcție de stocul disponibil în prezent.
Da. Expediem componente pentru automatizări industriale clienților din întreaga lume. Costul transportului și timpul de livrare depind de destinație, greutatea coletului, dimensiunea produsului și cerințele locale de import.
Folosim în mod obișnuit DHL, FedEx, UPS și alte servicii internaționale de curierat. Transportatorul poate fi ales în funcție de destinație, viteza de livrare, dimensiunea expedierii și cerințele clientului.
Produsele noastre sunt, în general, acoperite de o garanție de 12 luni. Produsele eligibile pot fi, de asemenea, returnate în conformitate cu politica noastră de rambursare în termen de 30 de zile. Vă rugăm să contactați echipa noastră înainte de a returna orice produs pentru a confirma condițiile aplicabile și instrucțiunile de returnare.
S-ar putea să-ți placă și acestea
Articole de blog
Știri despre automatizarea industrială, ghiduri tehnice și actualizări ale produselor.
