
Veți fi notificat(ă) prin e-mail când acest produs devine disponibil
- Descriere
- Reviews
- Livrare și plată
The Schneider Electric BMXNOM0200 is a Modicon X80 serial communication module equipped with two RS-232/RS-485 interfaces for Modbus and character-mode communication. It provides serial connectivity for Modicon M340 and M580 automation platforms, with RJ45 connections, internal rack power supply, and independent activity indicators for both serial ports.
Communication Interfaces and Protocols
The BMXNOM0200 provides two serial communication interfaces with different electrical configurations and transmission rates:
- RS-232: RJ45 connector, 115.2 kbps, 8-wire connection.
- RS-485: RJ45 connector, 57.6 kbps, one twisted-pair connection.
- Communication modes: Modbus and character mode (ASCII).
The two interfaces allow the controller to exchange data with serial field devices and equipment. RS-232 supports point-to-point serial communication, while RS-485 provides a differential signaling interface suitable for multidrop serial networks. The actual network topology and device configuration must follow the applicable communication requirements.
Modicon X80 Platform Integration
The BMXNOM0200 belongs to the Modicon X80 modular I/O and communication platform. It is compatible with Modicon M340 and M580 PLC systems, providing serial communication within these automation architectures.
The module receives its operating power internally through the rack backplane. Its current consumption is 80 mA at 24 VDC, so no separate external power connection is specified for the module itself.
Status Indication and Diagnostics
Four LEDs provide local operating and communication status:
- ERR (red): Indicates a module fault.
- RUN (green): Indicates that the module is operating.
- SER COM 0 (green): Indicates serial interface 0 activity.
- SER COM 1 (green): Indicates serial interface 1 activity.
These indicators help maintenance personnel distinguish module operating status from serial communication activity during troubleshooting.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNOM0200 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Serial Communication Interface Module |
| Communication Interfaces | 2 serial ports |
| Serial Interface 0 | RS-232, RJ45, 115.2 kbps, 8 wires |
| Serial Interface 1 | RS-485, RJ45, 57.6 kbps, 1 twisted pair |
| Communication Modes | Modbus, Character Mode (ASCII) |
| Power Supply | Internal power supply via module rack |
| Current Consumption | 80 mA at 24 VDC |
| Local Diagnostics | ERR, RUN, SER COM 0, SER COM 1 LEDs |
| Module Format | Standard |
| Conformal Coating | TC |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 10 to 95%, non-condensing |
| Weight | 0.23 kg |
| Certifications | CE, UL |
| Standards | UL 508, EN 61131-2, EN 61000-6-4, EN 61000-6-2, EN 61010-2-201 |
| EU Directives | 2014/35/EU, 2014/30/EU |
| EAN | 3595864024431 |
| Lifecycle Carbon Footprint | 101 kg CO2 eq. |
Installation and Environmental Conditions
The BMXNOM0200 uses the standard Modicon X80 module format and obtains power through the module rack. Its IP20 protection rating indicates that it is intended for installation inside an appropriate electrical enclosure rather than direct exposure to water or dust.
The specified operating temperature range is 0 to 60 deg C, with relative humidity between 10% and 95%, provided that condensation does not occur. The TC conformal coating designation identifies its climatic treatment configuration.
Frequently Asked Questions
Q: Which PLC platforms support the BMXNOM0200?
A: The BMXNOM0200 is specified for use with Schneider Electric Modicon M340 and M580 PLC platforms. Confirm the rack configuration and applicable platform documentation before installation.
Q: Can the two serial ports operate at different communication speeds?
A: Yes. The specified interface rates are 115.2 kbps for RS-232 and 57.6 kbps for RS-485. Each interface has its own physical connection and activity indicator.
Q: Does the BMXNOM0200 require an external 24 VDC power supply?
A: No separate external supply is specified. The module receives power internally through the rack backplane and has a stated current consumption of 80 mA at 24 VDC.
Plată: T/T, Western Union.
Port de expediere: Xiamen.
Termen de livrare: De obicei, 1–3 zile lucrătoare după confirmarea plății (în funcție de disponibilitatea stocului).
Livrare în întreaga lume: Expediem componente de automatizare industrială clienților din întreaga lume. Costul transportului este calculat împreună cu solicitarea dvs. de ofertă.
Întrebări frecvente
Întrebări frecvente despre oferte, livrare, garanție și retururiFaceți clic pe Solicită o ofertă pe pagina produsului și trimiteți-ne numărul piesei, cantitatea necesară și țara de destinație. Echipa noastră de vânzări vă va răspunde cu informații despre disponibilitatea actuală, preț și timpul estimat de livrare.
Articolele aflate în stoc sunt, de obicei, pregătite după efectuarea plății și confirmarea comenzii. Majoritatea comenzilor sunt expediate din depozitul nostru din China, deși locația expedierii poate varia în funcție de stocul disponibil în prezent.
Da. Expediem componente pentru automatizări industriale clienților din întreaga lume. Costul transportului și timpul de livrare depind de destinație, greutatea coletului, dimensiunea produsului și cerințele locale de import.
Folosim în mod obișnuit DHL, FedEx, UPS și alte servicii internaționale de curierat. Transportatorul poate fi ales în funcție de destinație, viteza de livrare, dimensiunea expedierii și cerințele clientului.
Produsele noastre sunt, în general, acoperite de o garanție de 12 luni. Produsele eligibile pot fi, de asemenea, returnate în conformitate cu politica noastră de rambursare în termen de 30 de zile. Vă rugăm să contactați echipa noastră înainte de a returna orice produs pentru a confirma condițiile aplicabile și instrucțiunile de returnare.
S-ar putea să-ți placă și acestea
Articole de blog
Știri despre automatizarea industrială, ghiduri tehnice și actualizări ale produselor.
