
Veți fi notificat(ă) prin e-mail când acest produs devine disponibil
- Descriere
- Reviews
- Livrare și plată
The BMXP3420302 is a processor module for the Schneider Electric Modicon M340 automation platform. It manages PLC application execution, local I/O processing, and communication with distributed devices through Ethernet TCP/IP and CANopen. It supports up to 1,024 discrete I/O and 256 analog I/O in multi-rack configurations, with integrated USB, Ethernet, and CANopen interfaces.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXP3420302 |
| Brand | Schneider Electric |
| Product Series | Modicon M340 |
| Product Type | PLC Processor Module |
| Processor Platform | Modicon M340 |
| Number of Racks | 4 |
| Number of Slots | 11 |
| Discrete I/O Capacity | 1,024 I/O (multi-rack); 704 I/O (single-rack) |
| Analog I/O Capacity | 256 I/O (multi-rack); 66 I/O (single-rack) |
| Application-Specific Channels | 36 |
| CANopen Slave Capacity | 63 |
| Ethernet Port | RJ45, 10BASE-T/100BASE-TX |
| Ethernet Transmission Rate | 10/100 Mbit/s |
| USB Interface | 12 Mbit/s |
| CANopen Interface | SUB-D 9, 20 kbit/s to 1 Mbit/s |
| Internal RAM | 4,096 kB |
| Internal Data RAM | 256 kB |
| Program, Constants and Symbols RAM | 3,584 kB |
| Supplied Memory Card | BMXRMS008MP, 8 MB |
| Current Consumption | 135 mA at 24 VDC |
| Power Supply | Internal, supplied through the rack |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5 to 95%, non-condensing (source specification) |
| Protective Treatment | TC |
| Weight | 0.215 kg |
| EAN | 3595864024455 |
| Firmware Version Listed | SV03.70 |
| Sale Discontinuation Date | 01 December 2027 |
| Service Discontinuation Date | 31 December 2035 |
| Lifecycle Carbon Footprint | 162 kg CO2 eq. |
Processor Architecture and I/O Capacity
The BMXP3420302 coordinates application execution and I/O processing across the Modicon M340 rack system. Its maximum capacity depends on the rack configuration: up to 1,024 discrete I/O and 256 analog I/O in a multi-rack installation, compared with 704 discrete I/O and 66 analog I/O in a single-rack configuration.
The processor also supports 36 application-specific channels, programmable control loops, and independent-axis motion control over CANopen. These capabilities allow the controller to manage conventional PLC logic alongside supported control and motion functions.
Communication Interfaces and Network Services
The processor provides three integrated communication interfaces for programming and network connectivity:
- Ethernet TCP/IP: RJ45 connection supporting 10BASE-T/100BASE-TX for controller networking and Modbus TCP messaging.
- CANopen: SUB-D 9 master-bus interface supporting communication rates from 20 kbit/s to 1 Mbit/s.
- USB: 12 Mbit/s interface for programming and engineering access.
CANopen communication includes Network Management (NMT), Process Data Objects (PDO), Service Data Objects (SDO), and special functions such as SYNC, EMCY, and TIME. Ethernet services include bandwidth management, Data Editor, Rack Viewer, Modbus TCP messaging, and SNMP network management.
iportal2.schneider-electric.com+1
The CANopen master supports up to 63 slave devices. Network cable length depends on the selected transmission rate, so the bus topology and cable installation must be considered together when configuring the network.
Memory and Application Execution
The BMXP3420302 has 4,096 kB of internal RAM, including 256 kB allocated to data and 3,584 kB for programs, constants, and symbols. It is supplied with a BMXRMS008MP memory card for backing up application programs, constants, symbols, and data. The card also enables the standard Class B10 web server.
Its application structure includes one cyclic or periodic master task, one periodic fast task, and up to 64 event tasks. Instruction execution times are specified as follows:
| Instruction Type | Execution Time |
|---|---|
| Boolean | 0.12 us |
| Double-length words | 0.17 us |
| Single-length words | 0.25 us |
| Floating-point operations | 1.16 us |
The stated processing performance is 8.1 K instructions/ms for 100% Boolean operations and 6.4 K instructions/ms for a workload comprising 65% Boolean and 35% fixed arithmetic operations.
CANopen Transmission Rates
The specified transmission rates and corresponding cable distances are:
| CANopen Rate | Maximum Main Cable Distance | Maximum Branch Distance |
|---|---|---|
| 20 kbit/s | 2,500 m | 300 m |
| 50 kbit/s | 1,000 m | 120 m |
| 125 kbit/s | 500 m | 10 m |
| 250 kbit/s | 250 m | 10 m |
| 500 kbit/s | 100 m | 10 m |
| 800 kbit/s | 40 m | 6 m |
| 1 Mbit/s | 20 m | 0.6 m |
These values are the specified CANopen transmission-distance limits. Actual network design must also account for cable characteristics, topology, and connected device requirements.
Status Indicators and Diagnostics
The front-panel LEDs provide information about processor operation, network activity, and system faults. The indicators include:
- RUN: Processor operating status.
- ERR: Processor or system error.
- ETH ACT / ETH STS: Ethernet network activity and status.
- ETH 100: Ethernet transmission-rate indication.
- CAN RUN / CAN ERR: CANopen bus operating status and fault indication.
- I/O: I/O module fault indication.
- CARD ERR: Memory card error indication.
These indicators help maintenance personnel distinguish processor faults, communication problems, I/O errors, and memory-card issues during troubleshooting.
Lifecycle and Environmental Information
Schneider Electric lists the following lifecycle dates for BMXP3420302:
| Parameter | Specification |
|---|---|
| End of Sale | 01 December 2027 |
| End of Service | 31 December 2035 |
| Total Lifecycle Carbon Footprint | 162 kg CO2 eq. |
| Recyclability Potential | 32% |
| Take-Back Program | Yes |
The listed lifecycle dates are relevant to spare-parts planning and long-term maintenance procurement. The module remains part of the Modicon M340 platform, but purchasing decisions should account for the scheduled end of commercialization and service.
Frequently Asked Questions
Q: What is the difference between the BMXP3420302 and the BMXP342030?
A: Both are Modicon M340 processor modules with a maximum multi-rack capacity of 1,024 discrete I/O and 256 analog I/O. Schneider Electric identifies BMXP3420302 as the recommended replacement for BMXP342030. The two references should not be treated as identical ordering codes.
Q: Does the BMXP3420302 support CANopen motion control?
A: Yes. The processor supports independent-axis motion control over CANopen and provides a CANopen master interface. The network supports up to 63 slave devices, with transmission rates from 20 kbit/s to 1 Mbit/s.
Q: Is the BMXP3420302 supplied with a memory card?
A: Yes. The module is supplied with a BMXRMS008MP 8 MB memory card. It is used to back up programs, constants, symbols, and data, and enables the standard Class B10 web server.
Plată: T/T, Western Union.
Port de expediere: Xiamen.
Termen de livrare: De obicei, 1–3 zile lucrătoare după confirmarea plății (în funcție de disponibilitatea stocului).
Livrare în întreaga lume: Expediem componente de automatizare industrială clienților din întreaga lume. Costul transportului este calculat împreună cu solicitarea dvs. de ofertă.
Întrebări frecvente
Întrebări frecvente despre oferte, livrare, garanție și retururiFaceți clic pe Solicită o ofertă pe pagina produsului și trimiteți-ne numărul piesei, cantitatea necesară și țara de destinație. Echipa noastră de vânzări vă va răspunde cu informații despre disponibilitatea actuală, preț și timpul estimat de livrare.
Articolele aflate în stoc sunt, de obicei, pregătite după efectuarea plății și confirmarea comenzii. Majoritatea comenzilor sunt expediate din depozitul nostru din China, deși locația expedierii poate varia în funcție de stocul disponibil în prezent.
Da. Expediem componente pentru automatizări industriale clienților din întreaga lume. Costul transportului și timpul de livrare depind de destinație, greutatea coletului, dimensiunea produsului și cerințele locale de import.
Folosim în mod obișnuit DHL, FedEx, UPS și alte servicii internaționale de curierat. Transportatorul poate fi ales în funcție de destinație, viteza de livrare, dimensiunea expedierii și cerințele clientului.
Produsele noastre sunt, în general, acoperite de o garanție de 12 luni. Produsele eligibile pot fi, de asemenea, returnate în conformitate cu politica noastră de rambursare în termen de 30 de zile. Vă rugăm să contactați echipa noastră înainte de a returna orice produs pentru a confirma condițiile aplicabile și instrucțiunile de returnare.
S-ar putea să-ți placă și acestea
Articole de blog
Știri despre automatizarea industrială, ghiduri tehnice și actualizări ale produselor.
