
Bu ürün stokta olduğunda e-posta ile bilgilendirileceksiniz
- Açıklama
- Reviews
- Kargo ve Ödeme
The BMXDDM16025 is a mixed digital input/output module in Schneider Electric's Modicon X80 platform. It combines 24 VDC discrete input channels with relay output channels for interfacing field signals and switching external loads. The module provides 8 relay outputs rated for switching AC or DC circuits, with a 20-pin removable terminal block connection option and IP20 protection.
Functional Overview
The BMXDDM16025 handles discrete signal acquisition and relay-based output switching within a Modicon automation system. Its input circuits monitor 24 VDC field signals, while the relay outputs provide electrically switched contacts for controlling external devices.
The relay output arrangement allows the controller to switch loads supplied from separate external circuits rather than limiting output operation to the module's 24 VDC input supply. Output supply voltage and load conditions must be checked against the applicable relay ratings.
Digital Inputs and Relay Outputs
The input section uses 24 VDC discrete signal circuits with an input impedance of 6,800 Ohm. The input voltage detection thresholds distinguish sensor states: below 14 VDC is identified as a sensor fault, while above 18 VDC is identified as sensor OK.
The output section uses electromechanical relays. Its response time is specified as no more than 10 ms for activation and 8 ms for deactivation. The maximum switching voltage is specified as 264 VAC or 125 VDC. These switching limits should be considered separately from the field supply voltage and the permitted load current.
Signal Protection and Electrical Isolation
The module specifies an input protection arrangement with one external 0.5 A fast-acting fuse per input channel group. Separate external fast-acting fuse protection is specified for output channels or channel groups.
Electrical isolation specifications include more than 10 MOhm insulation resistance at 500 VDC. Dielectric strength is specified at 1,500 VAC for 1 minute between primary and secondary circuits, 2,830 VAC for 1 minute across relay outputs, and 500 VDC for 1 minute between I/O groups.
Modicon X80 Platform Integration
The BMXDDM16025 belongs to the Modicon X80 I/O platform, which provides a common hardware environment for Modicon M340 and M580 automation architectures. The module is specified for local or remote I/O configurations, subject to the applicable PLC, rack and hardware configuration.
The module is installed on a compatible module carrier and secured with two screws. A 20-pin cage-clamp, screw-clamp or removable spring-clamp terminal block is specified as the connection option. Verify the terminal block reference and rack configuration before installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM16025 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Mixed Digital I/O Relay Module |
| Digital Input Voltage | 24 VDC |
| Digital Input Impedance | 6,800 Ohm |
| Digital Input Channels | 8 channels (product page listing; see editorial note) |
| Digital Output Channels | 8 |
| Digital Output Type | Relay |
| Output Switching Voltage | 24-240 VAC (product designation) |
| Maximum Switching Voltage | 264 VAC / 125 VDC |
| Minimum Switching Current | 1 mA at 5 VDC |
| Output Response Time | 18 VDC: sensor OK |
| Insulation Resistance | > 10 MOhm at 500 VDC |
| Input Protection | One external 0.5 A fast-acting fuse per input channel group |
| Output Protection | External fast-acting fuse per output channel or channel group |
| Dielectric Strength | 1,500 VAC, 50/60 Hz, 1 min, primary/secondary |
| Relay Output Dielectric Strength | 2,830 VAC, 50/60 Hz, 1 min |
| I/O Group Isolation | 500 VDC, 1 min |
| Mounting | Modicon X80 module carrier, secured with 2 screws |
| Connection | 20-pin removable terminal block |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Climatic Treatment | TC |
| MTBF | Approximately 940,000 hours |
| Protective Coating | Standard version |
| Weight | 0.135 kg |
| EAN | 3595863910612 |
| Lifecycle Carbon Footprint | 27 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between the BMXDDM16025 and a transistor output module?
A: The BMXDDM16025 uses relay contacts for its discrete outputs, whereas transistor output modules use semiconductor switching. Relay outputs support specified AC and DC switching circuits, but their mechanical switching frequency and response characteristics differ from solid-state outputs.
Q: Can the relay outputs switch AC and DC loads?
A: Yes. The specified maximum switching voltages are 264 VAC and 125 VDC. The actual permissible load current depends on the applicable relay load ratings and operating conditions; the maximum voltage alone does not establish a 3 A rating for every load type.
Q: What should be checked before replacing an existing BMXDDM16025?
A: Verify the input channel count, relay output configuration, terminal block arrangement, external supply requirements and rack compatibility. Also check the controller's local or remote I/O configuration to ensure that the replacement matches the existing installation.
Ödeme: T/T, Western Union.
Sevkiyat limanı: Xiamen.
Teslim süresi: Ödeme onayından sonra genellikle 1–3 iş günü (stok durumuna bağlıdır).
Dünya genelinde teslimat: Endüstriyel otomasyon parçalarını dünyanın dört bir yanındaki müşterilerimize gönderiyoruz. Nakliye ücreti, RFQ’nuzla birlikte teklif edilir.
Sıkça Sorulan Sorular
Teklifler, gönderim, garanti ve iadeler hakkında sık sorulan sorularÜrün sayfasında Teklif İste seçeneğine tıklayın ve parça numarasını, gereken miktarı ve varış ülkesini bize gönderin. Satış ekibimiz güncel stok durumu, fiyatlandırma ve tahmini teslimat süresiyle size yanıt verecektir.
Stokta bulunan ürünler normalde ödeme ve sipariş onayından sonra hazırlanır. Çoğu sipariş Çin'deki depomuzdan gönderilir; ancak gönderim konumu mevcut stoğa bağlı olarak değişebilir.
Evet. Endüstriyel otomasyon parçalarını dünya genelindeki müşterilere gönderiyoruz. Kargo ücreti ve taşıma süresi; varış noktasına, paketin ağırlığına, ürünün boyutuna ve yerel ithalat gerekliliklerine bağlıdır.
Genellikle DHL, FedEx, UPS ve diğer uluslararası kurye hizmetlerini kullanıyoruz. Taşıyıcı; varış noktasına, teslimat hızına, gönderi boyutuna ve müşteri gereksinimlerine göre seçilebilir.
Ürünlerimiz genel olarak 12 aylık garanti kapsamındadır. Uygun ürünler ayrıca 30 günlük para iade politikamız kapsamında iade edilebilir. Uygulanabilir koşulları ve iade talimatlarını teyit etmek için lütfen herhangi bir ürünü iade etmeden önce ekibimizle iletişime geçin.
Bunlar da ilginizi çekebilir
Blog Gönderileri
Endüstriyel otomasyon haberleri, teknik kılavuzlar ve ürün güncellemeleri.
