
Bu ürün stokta olduğunda e-posta ile bilgilendirileceksiniz
- Açıklama
- Reviews
- Kargo ve Ödeme
The Schneider Electric BMXDRA0805 is an 8-channel discrete relay output module for the Modicon M340 automation platform. Part of the Modicon X80 range, it provides relay-based switching for DC output circuits with a specified 12-24 VDC operating range. The module supports removable 20-pin screw or spring terminal connections and is designed for harsh-environment installations in its H-rated configuration.
Functional Description
The BMXDRA0805 provides eight relay output channels for switching external loads through discrete control signals. Relay contacts provide electrically isolated switching between the control electronics and the connected output circuits, subject to the module's specified contact and wiring limits.
The module has an output activation response time of 10 ms and a deactivation response time of less than 8 ms. These values are relevant when evaluating output timing in control sequences, particularly where relay switching response must be considered separately from PLC scan time.
Electrical and Connection Characteristics
The module uses a removable 20-pin terminal connection, available with screw or spring-clamp wiring arrangements. The connection type should be matched to the installed terminal block and cabinet wiring configuration.
The specified minimum switching current is 10 mA at 5 VDC. This is a minimum contact-load condition, not the module's rated maximum switching current. Maximum contact voltage, current and load ratings should be checked against the applicable product documentation before connecting field devices.
Output Protection and Electrical Isolation
The output circuits do not have built-in short-circuit or overload protection. Schneider specifies an external fast-blow fuse for each relay or protected group of channels. For inductive loads, additional suppression is required: a discharge diode for DC circuits and an RC circuit or ZNO surge limiter for AC circuits.
The module has an insulation resistance greater than 10 MOhm at 500 VDC and a dielectric withstand rating of 2000 VAC at 50/60 Hz for 1 minute. These specifications are relevant when checking electrical separation and the protection arrangements of connected field circuits.
Environmental and Mechanical Characteristics
The module has an IP20 protection rating and a product weight of 0.145 kg. Its specified relative humidity range is 5-95% at 55 deg C, with no condensation permitted.
The BMXDRA0805H is the harsh-environment variant identified by the H suffix. The supplied Schneider product information associates this variant with a temperature range of -25 to +70 deg C and protective coating. These conditions should not be attributed to the standard BMXDRA0805 without the H suffix.
Lifecycle and Replacement Information
Schneider Electric lists the BMXDRA0805 as discontinued on 30 June 2022, with service scheduled to end on 30 June 2030, according to the supplied regional product record. The recommended replacement is BMXDRA0815, an 8-channel relay output module with a different specified DC voltage range of 24-125 VDC and an AC range of 24-240 VAC.
The replacement should not be treated as an electrically identical substitute. Check field supply voltage, relay load ratings, terminal arrangements and application requirements before changing the installed module.
Schneider Electric Österreich+1
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRA0805 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 8 |
| Output Type | Relay, normally open |
| Output Voltage | 12-24 VDC; 24-240 VAC |
| DC Operating Voltage Range | 10-34 VDC |
| AC Operating Voltage Range | 19-264 VAC |
| Conventional Free-Air Thermal Current | 3 A |
| Minimum Switching Current | 10 mA at 5 VDC |
| Output Activation Time | Less than 10 ms |
| Output Deactivation Time | Less than 8 ms |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Dielectric Strength | 2000 VAC at 50/60 Hz for 1 min |
| Power Dissipation | 2.7 W |
| Typical Current Consumption | 79 mA at 3.3 VDC |
| MTBF | 2,119,902 hours |
| Connection | Removable 20-pin terminal block |
| Terminal Type | Screw or spring-clamp |
| Output Protection | External fast-blow fuse; external inductive-load suppression |
| Protection Rating | IP20 |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Product Weight | 0.145 kg |
| EAN | 3595863910650 |
| Recommended Replacement | BMXDRA0815 |
Frequently Asked Questions
Q: Can the BMXDRA0805 switch both AC and DC loads?
A: Yes. Its relay outputs support specified AC and DC switching circuits. The documented ranges are 19-264 VAC and 10-34 VDC. The actual load must also satisfy the applicable relay switching and electrical durability ratings.
Q: Does the BMXDRA0805 provide built-in short-circuit protection?
A: No. External fast-blow fuses are required for the relay output circuits. Inductive loads also require suitable external suppression, selected according to whether the switched circuit is AC or DC.
Q: What is the difference between BMXDRA0805 and BMXDRA0805H?
A: The H suffix identifies the harsh-environment version. The supplied product information specifies a -25 to +70 deg C operating range and protective coating for this version. These characteristics should not be assumed for the standard BMXDRA0805.
Ödeme: T/T, Western Union.
Sevkiyat limanı: Xiamen.
Teslim süresi: Ödeme onayından sonra genellikle 1–3 iş günü (stok durumuna bağlıdır).
Dünya genelinde teslimat: Endüstriyel otomasyon parçalarını dünyanın dört bir yanındaki müşterilerimize gönderiyoruz. Nakliye ücreti, RFQ’nuzla birlikte teklif edilir.
Sıkça Sorulan Sorular
Teklifler, gönderim, garanti ve iadeler hakkında sık sorulan sorularÜrün sayfasında Teklif İste seçeneğine tıklayın ve parça numarasını, gereken miktarı ve varış ülkesini bize gönderin. Satış ekibimiz güncel stok durumu, fiyatlandırma ve tahmini teslimat süresiyle size yanıt verecektir.
Stokta bulunan ürünler normalde ödeme ve sipariş onayından sonra hazırlanır. Çoğu sipariş Çin'deki depomuzdan gönderilir; ancak gönderim konumu mevcut stoğa bağlı olarak değişebilir.
Evet. Endüstriyel otomasyon parçalarını dünya genelindeki müşterilere gönderiyoruz. Kargo ücreti ve taşıma süresi; varış noktasına, paketin ağırlığına, ürünün boyutuna ve yerel ithalat gerekliliklerine bağlıdır.
Genellikle DHL, FedEx, UPS ve diğer uluslararası kurye hizmetlerini kullanıyoruz. Taşıyıcı; varış noktasına, teslimat hızına, gönderi boyutuna ve müşteri gereksinimlerine göre seçilebilir.
Ürünlerimiz genel olarak 12 aylık garanti kapsamındadır. Uygun ürünler ayrıca 30 günlük para iade politikamız kapsamında iade edilebilir. Uygulanabilir koşulları ve iade talimatlarını teyit etmek için lütfen herhangi bir ürünü iade etmeden önce ekibimizle iletişime geçin.
Bunlar da ilginizi çekebilir
Blog Gönderileri
Endüstriyel otomasyon haberleri, teknik kılavuzlar ve ürün güncellemeleri.
