
Bu ürün stokta olduğunda e-posta ile bilgilendirileceksiniz
- Açıklama
- Reviews
- Kargo ve Ödeme
The Schneider BMXEHC0800H is an 8-channel high-speed counter module in the Modicon X80 I/O family, designed for counting and frequency measurement in industrial automation systems. It supports counting frequencies up to 10 kHz and accepts signals from 19.2-30 V DC two-wire or three-wire proximity sensors and 10-30 V DC push-pull incremental encoders. Its extended operating temperature range is -25 to 70 deg C.
Counting Functions and Signal Processing
The BMXEHC0800H processes high-speed input signals for counting and measurement tasks. Its supported functions include:
- Up/down counting
- 32-bit up-counting
- Down-counting
- Modulo counting
- Frequency measurement
- Counting event detection
The module supports 8 high-speed channels, with 2 inputs in single-mode operation or 3 inputs in a specific two-phase operating mode. The maximum counting frequency is 10 kHz, making it suitable for applications that require pulse counting and incremental position or speed-related signal processing.
Input Compatibility and Electrical Characteristics
The module accepts signals from 19.2-30 V DC two-wire and three-wire proximity sensors, as well as incremental encoders with 10-30 V DC push-pull outputs. The guaranteed logic thresholds define the valid input states: 11-30 V DC for logic 1 and 5 V DC for logic 0.
The 4.5 mA input current and 5 ms cycle time are relevant when evaluating sensor output characteristics and the timing requirements of the counting application. The specified 1500 V insulation voltage applies for 60 seconds.
Electrical Connection and Power Requirements
The BMXEHC0800H uses one 20-pin connector for its electrical connections. Its power consumption is divided between the internal bus supply and the encoder supply:
- 200 mA at 3.3 V DC bus
- 80 mA at 24 V DC encoder supply
These are separate supply requirements and should be considered when checking the available capacity of the PLC rack power supply and the external encoder supply.
Installation and Environmental Conditions
The module is designed for installation in a Modicon X80 module rack and is secured with two screws. Its IP20 enclosure protects the electronic components against contact and solid foreign objects within the limits of this protection rating; it does not provide protection against water ingress.
The extended operating temperature range of -25 to 70 deg C and specified resistance to gases, dust, sand, salt, and biological contaminants support its use in demanding installation environments. Relative humidity is specified at 10-95%, with condensation not permitted.
Certifications and Standards
The product carries the following certifications and environmental classifications according to the supplied Schneider specifications:
- CE, UL, CSA, RCM and EAC
- Merchant marine
- ATEX Zone 2/22
- IECEx Zone 2/22
- Class I, Division 2 hazardous-location classification
- IEC 61131-2 and IEC 61010-2-201
- IACS E10
- EN/IEC 61850-3, Location G
- EN/IEC 61000-6-5, Interface Types 1 and 2
The specifications also identify gas resistance Class Gx under ISA S71.04, gas resistance Class 3C4, dust and sand resistance Class 3S4, and mould resistance Class 3B2.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXEHC0800H |
| Brand | Schneider Electric |
| Product Type | High-Speed Counter Module |
| Product Family | Modicon X80 |
| Automation Platform | Modicon M340 |
| Number of Channels | 8 |
| Maximum Counting Frequency | 10 kHz |
| Number of Inputs | 2 in single mode; 3 in special two-phase mode |
| Input Type | High-speed |
| Input Voltage | 24 V DC, Type 3 |
| Input Voltage Limits | 24 V DC |
| Input Current | 4.5 mA |
| Guaranteed Logic 1 Voltage | 11-30 V DC |
| Guaranteed Logic 1 Current | Greater than 2 mA at U >= 11 V |
| Guaranteed Logic 0 Voltage | 5 V DC |
| Guaranteed Logic 0 Current | Less than 1.5 mA |
| Compatible Sensors | 19.2-30 V DC 2-wire/3-wire proximity sensors |
| Encoder Compatibility | 10-30 V DC push-pull incremental encoders |
| Counting Functions | Event counting, up/down counting, modulo counting, frequency measurement, 32-bit up-counting and down-counting |
| Cycle Time | 5 ms |
| Insulation Voltage | 1500 V for 60 s |
| Electrical Connection | 1 x 20-pin connector |
| Bus Current Consumption | 200 mA at 3.3 V DC |
| Encoder Supply Current | 80 mA at 24 V DC |
| Module Format | Standard |
| Protective Coating | Conformal coating |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Protection Rating | IP20 |
| Environmental Resistance | Gas, dust, sand, salt and mould resistance classifications specified |
| Product Certifications | CE, UL, CSA, RCM, EAC, Merchant Marine, ATEX, IECEx |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10 |
| Product Weight | 0.113 kg |
| EAN | 3595864010427 |
| Lifecycle Carbon Footprint | 103 kg CO2 eq. |
Frequently Asked Questions
Q: How many high-speed channels does the BMXEHC0800H provide?
A: The module provides 8 high-speed channels, with 2 inputs in single-mode operation and 3 inputs in its specified special two-phase operating mode. The maximum counting frequency is 10 kHz.
Q: Which sensors and encoders are compatible with the BMXEHC0800H?
A: It supports 19.2-30 V DC two-wire and three-wire proximity sensors, along with incremental encoders featuring 10-30 V DC push-pull outputs. The sensor output voltage and current characteristics must meet the module's specified input thresholds.
Q: What installation conditions should be checked before replacing this module?
A: Verify the Modicon X80 rack installation, two-screw fastening arrangement, 20-pin connection, bus power requirements and 24 V DC encoder supply. Also check the sensor configuration, counting mode and operating temperature requirements before commissioning.
Ödeme: T/T, Western Union.
Sevkiyat limanı: Xiamen.
Teslim süresi: Ödeme onayından sonra genellikle 1–3 iş günü (stok durumuna bağlıdır).
Dünya genelinde teslimat: Endüstriyel otomasyon parçalarını dünyanın dört bir yanındaki müşterilerimize gönderiyoruz. Nakliye ücreti, RFQ’nuzla birlikte teklif edilir.
Sıkça Sorulan Sorular
Teklifler, gönderim, garanti ve iadeler hakkında sık sorulan sorularÜrün sayfasında Teklif İste seçeneğine tıklayın ve parça numarasını, gereken miktarı ve varış ülkesini bize gönderin. Satış ekibimiz güncel stok durumu, fiyatlandırma ve tahmini teslimat süresiyle size yanıt verecektir.
Stokta bulunan ürünler normalde ödeme ve sipariş onayından sonra hazırlanır. Çoğu sipariş Çin'deki depomuzdan gönderilir; ancak gönderim konumu mevcut stoğa bağlı olarak değişebilir.
Evet. Endüstriyel otomasyon parçalarını dünya genelindeki müşterilere gönderiyoruz. Kargo ücreti ve taşıma süresi; varış noktasına, paketin ağırlığına, ürünün boyutuna ve yerel ithalat gerekliliklerine bağlıdır.
Genellikle DHL, FedEx, UPS ve diğer uluslararası kurye hizmetlerini kullanıyoruz. Taşıyıcı; varış noktasına, teslimat hızına, gönderi boyutuna ve müşteri gereksinimlerine göre seçilebilir.
Ürünlerimiz genel olarak 12 aylık garanti kapsamındadır. Uygun ürünler ayrıca 30 günlük para iade politikamız kapsamında iade edilebilir. Uygulanabilir koşulları ve iade talimatlarını teyit etmek için lütfen herhangi bir ürünü iade etmeden önce ekibimizle iletişime geçin.
Bunlar da ilginizi çekebilir
Blog Gönderileri
Endüstriyel otomasyon haberleri, teknik kılavuzlar ve ürün güncellemeleri.
