Medya galerisi
Medya galerisi
Medya galerisi

Schneider Electric BMEP58CPROS3 Modicon M580 Safety CoProcessor

18 adet stokta

Manufacturer: Schneider
Product No.: BMEP58CPROS3
Country of origin: France
Product Type: Modicon M580 Safety CoProcessor
Condition: Yepyeni
Payment: T/T, Western Union
Weight: 0.849 kg
Shipping port: Xiamen
Warranty: 12 ay

Açıklama
Reviews
Kargo ve Ödeme

Configured for safety processing between the Modicon M580 Safety processor and rack-based control architecture, the Schneider Electric BMEP58CPROS3 (BMEP58CPROS3 Safety CoProcessor) provides direct processor-level execution through the internal rack power and backplane interface. It is a coated processor module with SIL 3 capability, IP20 protection, and Modicon X80 compatibility.

Hardware Specifications

Parameter	Specification
Model	BMEP58CPROS3
Brand	Schneider Electric
Series	Modicon M580
Product Type	Safety CoProcessor
Processor Function	Safety CoProcessor module
Safety Level	SIL 3, PL = e
Supply	Internal power supply via rack
Current Consumption	295 mA at 24 VDC
Dimensions	64 x 130 x 135 mm
Weight	0.849 kg
Operating Temp	-25 to 60 deg C
Storage Temp	-40 to 85 deg C
Ingress Protection	IP20
Vibration Resistance	3 gn
Shock Resistance	15 gn
Relative Humidity	5 to 95% at 55 deg C, non-condensing
Operating Altitude	0 to 2000 m; 2000 to 5000 m with derating
Protective Treatment	Conformal coating
MTBF	946000 h
Compatible Platform	Modicon M580 Safety processor and Modicon X80
Programming Software	EcoStruxure Control Expert
Country of Origin	US
Certifications	CE, UL, CSA, RCM, EAC, UKCA, ATEX Zone 2/22, IECEx Zone 2/22, TUV
Standards	IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, IEC 61508 and related standards

M580 Safety Processor and Backplane Integration

BMEP58CPROS3 is installed in the Modicon M580 rack next to the M580 Safety processor. The module receives its operating power through the rack and interfaces with the rack architecture rather than using a separate field power input.

The specified installation requires the CoProcessor to be mounted adjacent to the CPU and secured with two screws at the top of the module. Modicon X80 I/O, backplane and cable components can be used within the supported M580 architecture.

The module provides status indication through RUN, ERR, DL, SRUN and SMOD LEDs for processor operation, fault status, download activity, safety mode and maintenance mode.

Safety and Environmental Characteristics

The module is specified for SIL 3 and PL = e applications and uses conformal coating for environmental protection. Environmental specifications include IP20 protection, 3 gn vibration resistance and 15 gn shock resistance.

The published environmental characteristics include gas resistance class Gx under ISA S71.04, gas resistance class 3C4 and dust and sand resistance class 3S4 under IEC 60721-3-3. ATEX and IECEx Zone 2/22 certifications are also specified.

Frequently Asked Questions

Q: Does BMEP58CPROS3 require a separate power supply?

A: No. The module receives its operating power internally through the Modicon M580 rack. The specified current consumption is 295 mA at 24 VDC.

Q: Where should the BMEP58CPROS3 be installed in the rack?

A: The CoProcessor must be installed in the rack next to the M580 Safety processor and secured using the specified two top mounting screws.

Q: Which software is specified for configuration and programming?

A: The module operates within the Modicon M580 architecture using EcoStruxure Control Expert.

Field Installation Guidelines

Verify that the rack, M580 Safety processor and associated X80 components are compatible before installation.
Install the BMEP58CPROS3 directly next to the M580 Safety processor as specified by the product documentation.
Secure the module mechanically with the designated mounting screws before energizing the rack.
Keep the module within the specified -25 to 60 deg C operating temperature range.
Maintain the required environmental conditions for humidity, vibration, shock and altitude.
Do not obstruct the module ventilation area or exceed the IP20 installation environment.
Follow the applicable cabinet grounding and EMC practices for the complete M580 installation.
Route power and communication wiring according to the system installation documentation and maintain physical separation from high-noise power circuits where required.
Confirm the RUN, ERR, DL, SRUN and SMOD indicators after installation and during commissioning.

Ödeme: T/T, Western Union.

Sevkiyat limanı: Xiamen.

Teslim süresi: Ödeme onayından sonra genellikle 1–3 iş günü (stok durumuna bağlıdır).

Dünya genelinde teslimat: Endüstriyel otomasyon parçalarını dünyanın dört bir yanındaki müşterilerimize gönderiyoruz. Nakliye ücreti, RFQ’nuzla birlikte teklif edilir.

Sıkça Sorulan Sorular

Teklifler, gönderim, garanti ve iadeler hakkında sık sorulan sorular

Ürün sayfasında Teklif İste seçeneğine tıklayın ve parça numarasını, gereken miktarı ve varış ülkesini bize gönderin. Satış ekibimiz güncel stok durumu, fiyatlandırma ve tahmini teslimat süresiyle size yanıt verecektir.

Stokta bulunan ürünler normalde ödeme ve sipariş onayından sonra hazırlanır. Çoğu sipariş Çin'deki depomuzdan gönderilir; ancak gönderim konumu mevcut stoğa bağlı olarak değişebilir.

Evet. Endüstriyel otomasyon parçalarını dünya genelindeki müşterilere gönderiyoruz. Kargo ücreti ve taşıma süresi; varış noktasına, paketin ağırlığına, ürünün boyutuna ve yerel ithalat gerekliliklerine bağlıdır.

Genellikle DHL, FedEx, UPS ve diğer uluslararası kurye hizmetlerini kullanıyoruz. Taşıyıcı; varış noktasına, teslimat hızına, gönderi boyutuna ve müşteri gereksinimlerine göre seçilebilir.

Ürünlerimiz genel olarak 12 aylık garanti kapsamındadır. Uygun ürünler ayrıca 30 günlük para iade politikamız kapsamında iade edilebilir. Uygulanabilir koşulları ve iade talimatlarını teyit etmek için lütfen herhangi bir ürünü iade etmeden önce ekibimizle iletişime geçin.