Medya galerisi
Medya galerisi
Medya galerisi

Schneider Electric BMXAMI0410H Modicon X80 Analog Input Module

18 adet stokta

Manufacturer: Schneider
Product No.: BMXAMI0410H
Country of origin: France
Product Type: Modicon X80 Analog Input Module
Condition: Yepyeni
Payment: T/T, Western Union
Weight: 0.143 kg
Shipping port: Xiamen
Warranty: 12 ay

Açıklama
Reviews
Kargo ve Ödeme

Configured for isolated analog signal acquisition in the Modicon X80 platform, the Schneider Electric BMXAMI0410H (BMXAMI0410H analog input module) provides four high-level input channels for current and voltage measurement. It supports 16-bit analog resolution, channel isolation, conformal coating, and direct connection through a 20-way connector.

Hardware Specifications

Parameter	Specification
Model	BMXAMI0410H
Brand	Schneider Electric
Series	Modicon X80
Product Type	Analog input module
Input Channels	4
Input Type	Isolated high-level analog input
Current Input	+/- 20 mA, 0...20 mA, 4...20 mA
Voltage Input	+/- 10 V, +/- 5 V, 0...10 V, 0...5 V, 1...5 V
Analog Input Resolution	16 bits
A/D Conversion	24 bits
Measurement Resolution	0.92 uA for current ranges; 0.35 mV for voltage ranges
Input Impedance	10 MOhm voltage mode; 250 Ohm + 3.6...50 Ohm internal protective resistor current mode
Channel Isolation	300 VDC between channels
Isolation to Ground	1400 VDC
Isolation to Bus	1400 VDC
Crosstalk Attenuation	Minimum 80 dB
Common Mode Rejection	90 dB
Conversion Cycle	1 ms + 1 ms x number of channels used, fast read
Nominal Read Cycle	5 ms for 4 channels
Measurement Error	0.15% of full scale for current inputs at 25 deg C; 0.075% of full scale for voltage inputs at 25 deg C
Maximum Operating Error	Up to 0.55% of full scale for current inputs and 0.2% of full scale for voltage inputs over -25...70 deg C
Power Consumption	0.82 W typical / 1.30 W maximum at 24 VDC
Current Consumption	45 mA at 24 VDC; 150 mA at 3.3 VDC
Electrical Connection	20-way connector
Protective Treatment	Conformal coating
Protection Rating	IP20
Operating Temp	-25...70 deg C
Storage Temp	-40...85 deg C
Relative Humidity	5...95% at 55 deg C, non-condensing
Vibration Resistance	3 gn
Shock Resistance	30 gn
Weight	0.143 kg
Origin	US
Certifications	CE, RCM, CSA, EAC, Merchant Navy, UL, ATEX, IEC-Ex
Standards	IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No 61010-2-201

Industrial Control and Analog Signal Integrity

The BMXAMI0410H uses isolated input channels to separate analog measurement circuits from each other and from the Modicon X80 bus. The module accepts both current and voltage signal ranges, allowing channel configuration for 4-20 mA, 0-20 mA, +/- 20 mA, 0-10 V, +/- 10 V, 0-5 V, +/- 5 V, and 1-5 V signals.

A minimum 80 dB crosstalk attenuation and 90 dB common mode rejection are specified for signal acquisition. The module uses first-order digital filtering and provides a digital value range of -32768 to +32767 in maximum user scale, with +/-10000 as the default scale.

The conformal-coated construction is specified for severe environments. Environmental characteristics include gas resistance class Gx and 3C4, dust and sand resistance class 3S4, salt resistance level 2, and mold and fungal-spore resistance class 3B2.

Frequently Asked Questions

Q: What signal types can the BMXAMI0410H measure?
A: The four channels support +/- 20 mA, 0...20 mA, 4...20 mA, +/- 10 V, +/- 5 V, 0...10 V, 0...5 V, and 1...5 V input ranges.

Q: Are the four analog channels electrically isolated?
A: Yes. The module specifies 300 VDC isolation between channels and 1400 VDC isolation between channels and ground and between channels and the bus.

Q: What is the maximum power consumption of the module?
A: The specified maximum consumption is 1.30 W at 24 VDC. The typical value is 0.82 W.

Field Installation Guidelines

Install the module in a compatible Modicon X80 rack and connect it through the specified 20-way connector.
Verify the configured input range against the actual field transmitter or voltage source before energizing the channel.
Keep analog signal wiring separated from high-current power and switching conductors to reduce electromagnetic coupling.
Use appropriate shield termination practices for the installed signal and cabinet grounding design.
Confirm channel isolation requirements when connecting field devices with different reference potentials.
Maintain the specified operating temperature and humidity limits inside the enclosure.
Check the RUN, channel diagnostic, ERR, and I/O LEDs during commissioning.
Do not apply input voltages or currents outside the documented overload and conversion limits.

Ödeme: T/T, Western Union.

Sevkiyat limanı: Xiamen.

Teslim süresi: Ödeme onayından sonra genellikle 1–3 iş günü (stok durumuna bağlıdır).

Dünya genelinde teslimat: Endüstriyel otomasyon parçalarını dünyanın dört bir yanındaki müşterilerimize gönderiyoruz. Nakliye ücreti, RFQ’nuzla birlikte teklif edilir.

Sıkça Sorulan Sorular

Teklifler, gönderim, garanti ve iadeler hakkında sık sorulan sorular

Ürün sayfasında Teklif İste seçeneğine tıklayın ve parça numarasını, gereken miktarı ve varış ülkesini bize gönderin. Satış ekibimiz güncel stok durumu, fiyatlandırma ve tahmini teslimat süresiyle size yanıt verecektir.

Stokta bulunan ürünler normalde ödeme ve sipariş onayından sonra hazırlanır. Çoğu sipariş Çin'deki depomuzdan gönderilir; ancak gönderim konumu mevcut stoğa bağlı olarak değişebilir.

Evet. Endüstriyel otomasyon parçalarını dünya genelindeki müşterilere gönderiyoruz. Kargo ücreti ve taşıma süresi; varış noktasına, paketin ağırlığına, ürünün boyutuna ve yerel ithalat gerekliliklerine bağlıdır.

Genellikle DHL, FedEx, UPS ve diğer uluslararası kurye hizmetlerini kullanıyoruz. Taşıyıcı; varış noktasına, teslimat hızına, gönderi boyutuna ve müşteri gereksinimlerine göre seçilebilir.

Ürünlerimiz genel olarak 12 aylık garanti kapsamındadır. Uygun ürünler ayrıca 30 günlük para iade politikamız kapsamında iade edilebilir. Uygulanabilir koşulları ve iade talimatlarını teyit etmek için lütfen herhangi bir ürünü iade etmeden önce ekibimizle iletişime geçin.