Ürün bilgilerine geç geschniegelt
1 -ın/-in 3

Schneider Electric BMXDDI3202K Modicon X80 Discrete Input Module

18 adet stokta
  • Manufacturer: Schneider
  • Product No.: BMXDDI3202K
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Input Module
  • Condition: Yepyeni
  • Payment: T/T, Western Union
  • Weight: 0.112 kg
  • Shipping port: Xiamen
  • Warranty: 12 ay
  • Açıklama
  • Reviews
  • Kargo ve Ödeme

The Schneider Electric BMXDDI3202K is a 32-channel discrete input module from the Modicon X80 I/O platform, designed for Modicon M340 and M580 PLC architectures. It processes 24 VDC positive-logic (sink) field signals using a high-density 40-pin connector interface, allowing compact field wiring via pre-assembled cords or Telefast connection sub-bases.

Technical Specifications

Parameter Specification
Model BMXDDI3202K
Brand Schneider Electric
Series Modicon X80
Product Type Discrete Input Module
Number of Inputs 32 isolated discrete inputs
Input Voltage 24 VDC (positive logic / sink)
Input Wiring Mode 2-wire or 3-wire
Input Current 2.5 mA at 24 VDC
State 1 Voltage Threshold greater than or equal to 11 V
State 0 Voltage Threshold less than or equal to 5 V
State 1 Current Threshold greater than or equal to 2 mA
State 0 Current Threshold less than or equal to 0.5 mA
Input Impedance 9600 Ohm
Typical Response Time 4 ms
Maximum Response Time 7 ms
Sensor Power Supply 19 to 30 VDC
Sensor Supply Fault Threshold less than 14 VDC (fault), greater than 18 VDC (OK)
Current Consumption 160 mA at 3.3 VDC (backplane), 121 mA DC typical
Power Dissipation 3.9 W
Dielectric Isolation 1500 V AC (50/60 Hz, 1 min) primary/secondary; 500 VDC (1 min) between channel groups
Hot-Swapping Yes (fallback supported)
Local LED Indicators 1 green RUN, 1 red ERR, 1 red I/O, 32 green channel status LEDs
Coating Type Standard version (non-conformal coated)
Degree of Protection IP20
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Operating Altitude 0 to 2000 m (2000 to 5000 m with derating)
Dimensions (H x W x D) 134.6 mm x 32 mm x 86 mm
Weight 0.112 kg

Signal Processing and Electrical Characteristics

The module accepts 24 VDC sink inputs compliant with IEC 61131-2 and IEC 60947-5-2 for 2-wire and 3-wire sensors. With a 9600 Ohm input impedance and 2.5 mA nominal input current at 24 VDC, it limits field power draw while guaranteeing State 1 recognition at 11 V or higher and State 0 at 5 V or lower.

Built-in sensor voltage supervision monitors the external 19 to 30 VDC field supply, triggering a fault state below 14 VDC and restoring normal status above 18 VDC. Input paralleling is not supported on this module.

Connector Interface and Mounting

Unlike screw-terminal Modicon X80 modules, the BMXDDI3202K uses a 40-pin connector (Pfostenstecker / HE10 style) to accommodate all 32 channels within a single 32 mm wide slot. Field connections require pre-wired 40-pin cordsets (such as BMXFCW or BMXFCC series) or Advantys Telefast ABE7 passive connection sub-bases.

The module mounts directly into a Modicon X80 backplane rack (for M340 or M580 local/remote I/O drops) and is secured with two captive mounting screws. Front-panel diagnostics include module-level RUN, ERR, and I/O LEDs alongside individual green status LEDs for each of the 32 channels.

Frequently Asked Questions

Q: How does the BMXDDI3202K connect to field sensors?A: It uses a 40-pin connector rather than removable screw terminals. You must connect it using pre-assembled 40-pin cables (like BMXFCW503 or BMXFCC series) or route signals through an Advantys Telefast ABE7 terminal block.

Q: What is the difference between BMXDDI3202K and the coated version?A: The BMXDDI3202K is the standard version without conformal coating, rated for 0 to 60 deg C operation and pollution degree 2. Applications requiring hardened conformal coating use the ruggedized variant (typically suffixed with H).

Q: Does the BMXDDI3202K support hot-swapping in a running rack?A: Yes, the module supports hot-swapping fallback when installed in compatible Modicon X80 racks, allowing replacement without powering down the entire PLC station.

Ödeme: T/T, Western Union.

Sevkiyat limanı: Xiamen.

Teslim süresi: Ödeme onayından sonra genellikle 1–3 iş günü (stok durumuna bağlıdır).

Dünya genelinde teslimat: Endüstriyel otomasyon parçalarını dünyanın dört bir yanındaki müşterilerimize gönderiyoruz. Nakliye ücreti, RFQ’nuzla birlikte teklif edilir.

Sıkça Sorulan Sorular

Teklifler, gönderim, garanti ve iadeler hakkında sık sorulan sorular

Ürün sayfasında Teklif İste seçeneğine tıklayın ve parça numarasını, gereken miktarı ve varış ülkesini bize gönderin. Satış ekibimiz güncel stok durumu, fiyatlandırma ve tahmini teslimat süresiyle size yanıt verecektir.

Stokta bulunan ürünler normalde ödeme ve sipariş onayından sonra hazırlanır. Çoğu sipariş Çin'deki depomuzdan gönderilir; ancak gönderim konumu mevcut stoğa bağlı olarak değişebilir.

Evet. Endüstriyel otomasyon parçalarını dünya genelindeki müşterilere gönderiyoruz. Kargo ücreti ve taşıma süresi; varış noktasına, paketin ağırlığına, ürünün boyutuna ve yerel ithalat gerekliliklerine bağlıdır.

Genellikle DHL, FedEx, UPS ve diğer uluslararası kurye hizmetlerini kullanıyoruz. Taşıyıcı; varış noktasına, teslimat hızına, gönderi boyutuna ve müşteri gereksinimlerine göre seçilebilir.

Ürünlerimiz genel olarak 12 aylık garanti kapsamındadır. Uygun ürünler ayrıca 30 günlük para iade politikamız kapsamında iade edilebilir. Uygulanabilir koşulları ve iade talimatlarını teyit etmek için lütfen herhangi bir ürünü iade etmeden önce ekibimizle iletişime geçin.

Products FAQs

Bunlar da ilginizi çekebilir