Chuyển đến thông tin sản phẩm
1 của 3

GE IC200MDL940F VersaMax 16-Point Relay Output Module

11 còn hàng
  • Manufacturer: General Electric
  • Product No.: IC200MDL940F
  • Product Type: VersaMax Analog Output Module
  • Condition: Mới hoàn toàn
  • Payment: T/T, Western Union
  • Weight: 0.2 kg
  • Shipping port: Hạ Môn
  • Warranty: 12 tháng
  • Mô tả
  • Reviews
  • Vận chuyển & Thanh toán

The GE IC200MDL940F is a 16-point relay output module in the VersaMax I/O product family. It provides individually isolated Form A (normally open) relay contacts for switching external AC and DC field loads. Its voltage-dependent contact ratings allow the module to handle different field circuit requirements, while individual channel indicators provide local output status information.

Output Configuration and Switching

The module uses 16 normally open mechanical relay contacts. Each output operates as a dry contact: the PLC output command controls relay operation, while the external field power supply provides the energy required by the connected load.

Individual channel isolation allows separate field circuits to be switched without sharing a common output reference. This is useful when different output points operate loads supplied from independent AC or DC circuits.

The relay contacts are rated for different current levels depending on the applied voltage:

  • 5-265 VAC: maximum 2.0 A per point.
  • 5-30 VDC: maximum 2.0 A per point.
  • 31-125 VDC: maximum 0.2 A per point.

These ratings are specified for resistive loads. The 2.0 A rating must not be applied to the entire DC voltage range. Inductive loads also require consideration of contact switching stress and suppression requirements.

Switching Characteristics and Output Protection

The maximum ON and OFF response times are both 10 ms. This is a mechanical relay output rather than a high-speed semiconductor output, so it is intended for discrete switching rather than pulse-width modulation or rapid repetitive switching.

For inductive loads, the specified maximum switching frequency is 20 cycles per minute. The module does not include internal output fuses or snubber circuits. External overcurrent protection and suitable suppression components should be selected according to the connected load.

Individual point-status LEDs indicate the output states, while the OK indicator provides information about backplane power availability.

Backplane Power and Installation

The module draws its operating power from the VersaMax backplane, with a maximum specified 5 VDC current consumption of 490 mA. The external field supply provides the power switched through the relay contacts; the backplane supply should not be confused with the field-load supply.

An appropriate VersaMax I/O carrier is required for field wiring termination. Before installation or replacement, verify the carrier arrangement, terminal assignments, field supply voltage and contact-current requirements against the installed hardware configuration.

Technical Specifications

Parameter Specification
Model IC200MDL940F
Brand GE
Product Series VersaMax
Product Type Relay Output Module
Number of Output Points 16
Relay Contact Type Form A, Normally Open (NO)
Relay Mechanism Fixed coil, moving armature
Contact Material Silver alloy
Output Voltage 0-265 VAC; 0-125 VDC
Nominal Output Voltage 120/240 VAC; 5/24/125 VDC
Maximum Load Current 2.0 A per point (5-265 VAC); 2.0 A per point (5-30 VDC); 0.2 A per point (31-125 VDC)
Minimum Load Current 10 mA per point
Channel-to-Channel Isolation Individually isolated points
ON Response Time 10 ms maximum
OFF Response Time 10 ms maximum
Switching Frequency 20 cycles per minute (inductive loads)
Output Voltage Drop 0.3 V maximum
Output Leakage Current Not applicable (open relay contact)
Backplane Power Supply 5 VDC
Backplane Current Consumption 490 mA maximum
External AC Field Supply Frequency 47-63 Hz

Frequently Asked Questions

Q: Can the IC200MDL940F switch different AC and DC voltage circuits simultaneously?

A: Yes. Its individually isolated relay contacts allow separate field circuits to use different AC or DC voltage sources, provided each circuit remains within the specified voltage and current ratings.

Q: What is the maximum DC switching current?

A: The maximum is 2.0 A per point at 5-30 VDC. For 31-125 VDC, the maximum decreases to 0.2 A per point. These ratings should be checked against the actual load characteristics.

Q: Does the IC200MDL940F provide built-in protection for inductive loads?

A: No. It does not include internal fuses or snubber circuits. External circuit protection and suitable transient suppression should be evaluated when switching relay coils, contactors or solenoid valves.

Thanh toán: T/T, Western Union.

Cảng vận chuyển: Hạ Môn.

Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).

Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.

Câu hỏi thường gặp

Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trả

Nhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.

Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.

Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.

Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.

Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.

Products FAQs

Bạn cũng có thể thích