
Đã thông báo qua email khi sản phẩm này có sẵn
- Mô tả
- Reviews
- Vận chuyển & Thanh toán
The Schneider Electric BMXCPS3020 is an isolated DC power supply module in the Modicon X80 range. It supplies power to a Modicon X80 I/O rack and its installed modules, providing separate 24 VDC and 3.3 VDC secondary outputs for the I/O and processor supply and the rack logic supply. It accepts an isolated 24-48 VDC input and includes secondary-circuit overload, overvoltage, and short-circuit protection.
Power Supply Function
The BMXCPS3020 converts its DC input into the secondary power required by the X80 rack. Its outputs serve two different functions:
- 24 VDC output: Supplies the I/O modules and processor, with a rated secondary power of 31.2 W.
- 3.3 VDC output: Supplies I/O module logic, with a rated secondary power of 15 W.
Separating these output functions allows the rack to supply both module operating power and internal logic power. The maximum power dissipation of the module is 8.5 W.
Input and Protection
The module accepts an isolated DC input with a nominal voltage range of 24-48 VDC. The specified primary voltage limits are 18-62.4 VDC, providing the permitted input operating range.
The protection functions differ between the primary and secondary circuits. The primary circuit has an internal fuse that is not accessible, while the secondary circuit includes overload, overvoltage, and short-circuit protection for the 24 V sensor supply.
The specified inrush current is 30 A at 24 VDC and 60 A at 48 VDC. These values should be considered when evaluating upstream DC power supply capacity and input circuit protection.
Electrical Connections and Indicators
The BMXCPS3020 provides separate connectors for power input and alarm relay connections:
- One 5-pin connector for the power supply input and protective earth.
- One 2-pin connector for the alarm relay.
- One green LED indicating that rack voltage is OK.
- One RESET push button for a cold start.
The maximum specified cable distance between devices depends on the copper conductor cross-section: 10 m with 1.5 mm2 cable or 15 m with 2.5 mm2 cable.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS3020 |
| Brand | Schneider Electric |
| Product Type | Modicon X80 Power Supply Module |
| Product Range | Modicon X80 |
| Input Voltage | 24-48 VDC, isolated |
| Primary Voltage Limits | 18-62.4 VDC |
| Input Current | 0.83 A at 48 VDC; 1.65 A at 24 VDC |
| Secondary Power - 24 VDC | 31.2 W |
| Secondary Power - 3.3 VDC | 15 W |
| Secondary Current - 24 VDC | 1.3 A |
| Secondary Current - 3.3 VDC | 4.5 A |
| Inrush Current | 30 A at 24 VDC; 60 A at 48 VDC |
| I2t at Power-On | 1 A2.s at 24 VDC; 3 A2.s at 48 VDC |
| Power-On Charge | 0.2 A.s at 24 VDC; 0.3 A.s at 48 VDC |
| Maximum Power Dissipation | 8.5 W |
| MTBF | 4,600,000 h |
| Primary Circuit Protection | Internal, non-accessible fuse |
| Secondary Circuit Protection | Overload, overvoltage and short-circuit protection |
| LED Indicator | Green - rack voltage OK |
| Reset Function | Cold-start RESET button |
| Electrical Connections | 1 x 5-pin power connector; 1 x 2-pin alarm relay connector |
| Maximum Cable Distance | 10 m with 1.5 mm2 copper cable; 15 m with 2.5 mm2 copper cable |
| Power Interruption Immunity | 1 ms |
| Insulation Resistance | >= 10 MOhm, primary/earth and primary/secondary |
| Dielectric Strength | 1500 V, primary/earth and primary/secondary |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 gn |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Protective Coating | TC |
| Operating Altitude | 0-2,000 m; derating required from 2,000 to 5,000 m |
| Weight | 0.34 kg |
| EAN | 3595863908985 |
| Lifecycle Carbon Footprint | 457 kg CO2 eq. |
Installation and Compatibility
The BMXCPS3020 is designed for installation in a Modicon X80 rack. It must be inserted into the module carrier and secured with two screws. Its stated backplane compatibility excludes the BMEXBP..02 backplane family.
The manufacturer specifies compatibility with Modicon X80 module carriers, subject to the stated backplane restriction. Before replacement, verify the installed rack reference and backplane type rather than relying solely on the X80 product family designation.
Standards and Certifications
The BMXCPS3020 is specified with the following certifications and standards:
- Certifications: CE, RCM, Merchant Navy, CSA, EAC and UL.
- Standards: EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201.
- EU directives: 2014/35/EU (Low Voltage) and 2014/30/EU (Electromagnetic Compatibility).
Frequently Asked Questions
Q: What is the difference between the 24 VDC and 3.3 VDC outputs?
A: The 24 VDC output supplies the I/O modules and processor, with 31.2 W of rated power. The 3.3 VDC output supplies I/O module logic, with 15 W of rated power. Both outputs serve different power requirements within the X80 rack.
Q: Is the BMXCPS3020 compatible with all Modicon X80 backplanes?
A: No. The specified compatibility excludes BMEXBP..02 backplanes. Check the exact backplane reference before selecting this power supply for a rack replacement.
Q: What input voltage can the BMXCPS3020 accept?
A: Its nominal isolated DC input range is 24-48 VDC, with specified primary voltage limits of 18-62.4 VDC. The input current is 1.65 A at 24 VDC and 0.83 A at 48 VDC. Upstream power supply and protection selection should also account for its specified inrush current.
Thanh toán: T/T, Western Union.
Cảng vận chuyển: Hạ Môn.
Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).
Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.
Câu hỏi thường gặp
Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trảNhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.
Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.
Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.
Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.
Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.
Bạn cũng có thể thích
Bài đăng blog
Tin tức về tự động hóa công nghiệp, hướng dẫn kỹ thuật và cập nhật sản phẩm.
