Chuyển đến thông tin sản phẩm
1 của 3

Schneider BMXCPS3500H Modicon X80 Power Supply Module

18 còn hàng
  • Manufacturer: Schneider
  • Product No.: BMXCPS3500H
  • Country of origin: France
  • Product Type: Modicon X80 Power Supply Module
  • Condition: Mới hoàn toàn
  • Payment: T/T, Western Union
  • Weight: 0.36 kg
  • Shipping port: Hạ Môn
  • Warranty: 12 tháng
  • Mô tả
  • Reviews
  • Vận chuyển & Thanh toán

The Schneider Electric BMXCPS3500H is a Modicon X80 power supply module designed for severe environmental conditions. It converts a 100-240 V AC primary supply into the DC power required by the rack, processor, I/O modules and field sensors. Its configuration includes separate 3.3 V DC and 24 V DC secondary supply circuits, conformal coating and an extended operating temperature range.

Power Supply Configuration

The BMXCPS3500H provides separate secondary power circuits for rack electronics, I/O and processor loads, and sensor devices. Output capacity depends on the operating temperature range, so the applicable power ratings must be considered when calculating the rack power budget.

  • 3.3 V DC: Supplies internal logic power to I/O modules.
  • 24 V DC: Supplies the I/O modules and processor.
  • 24 V DC sensor supply: Provides power for connected field sensors.

At ambient temperatures from 0 to 60 deg C, the specified secondary power ratings are higher than those available across the extended -25 to 70 deg C operating range. This distinction is important when configuring a rack for high-temperature or low-temperature service.

Electrical Protection and Diagnostics

The primary circuit has an internal fuse that is not accessible for replacement. The secondary circuits include overload, overvoltage and short-circuit protection.

Two green status LEDs indicate rack voltage OK and sensor voltage status. A front-panel RESET push-button initiates a cold restart, providing a local means of restarting the power supply.

Backplane and Electrical Connections

The module has a 5-pin connector for line supply, protective earth and the 24 V DC sensor input, together with a separate 2-pin alarm relay connector. The backplane compatibility restriction is important for replacement selection: BMXCPS3500H is not compatible with BMEXBP..02 backplanes.

Technical Specifications

Parameter Specification
Model BMXCPS3500H
Brand Schneider Electric
Product Range Modicon X80
Product Type Power Supply Module
Application Severe environments
Primary Voltage 100-240 V AC
Primary Voltage Limits 85-264 V AC
Network Frequency 50/60 Hz
Frequency Limits 47-63 Hz
Apparent Power 0.12 kVA
Input Current 0.52 A at 240 V; 1.04 A at 115 V
Inrush Current 30 A at 120 V; 60 A at 240 V
3.3 V DC Logic Supply 15 W at 0 to 60 deg C; 11.3 W at -25 to 70 deg C
24 V DC I/O and Processor Supply 31.2 W at 0 to 60 deg C; 23.4 W at -25 to 70 deg C
24 V DC Sensor Supply 21.6 W at 0 to 60 deg C; 16.2 W at -25 to 70 deg C
Maximum Output Current 4.5 A at 3.3 V DC; 1.3 A at 24 V DC for I/O and processor; 0.9 A for sensor supply
Maximum Power Dissipation 8.5 W
Protection Primary internal fuse; secondary overload, overvoltage and short-circuit protection
Backplane Compatibility Not compatible with BMEXBP..02
Electrical Connections 5-pin line supply connector; 2-pin alarm relay connector
Status Indicators Green rack voltage OK LED; green sensor voltage LED
Reset Function RESET push-button, cold restart
IP Rating IP20
Operating Temperature -25 to +70 deg C
Storage Temperature -40 to +85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Protective Treatment Conformal coating
Vibration Resistance 3 gn
Shock Resistance 30 gn
Immunity to Microbreaks 1 ms
Operating Altitude 0-2000 m; 2000-5000 m with derating
Insulation Resistance >= 100 Mohm, primary to ground and primary to secondary
Dielectric Strength 1500 V primary/secondary for logic and I/O supplies; 2300 V for sensor supply
Weight 0.36 kg
Country of Origin United States
GTIN 3595864029894

Environmental Resistance

The BMXCPS3500H has conformal coating and environmental resistance classifications for operation in demanding industrial environments.

Its documented environmental characteristics include:

  • Gas resistance: Class Gx, ISA S71.04.
  • Gas resistance: Class 3C4, IEC 60721-3-3.
  • Dust and sand resistance: Class 3S4, IEC 60721-3-3.
  • Mold and fungal spore resistance: Class 3B2, IEC 60721-3-3.
  • Salt resistance: Level 2, IEC 68252.
  • Hazardous location classification: Class I, Division 2.

Frequently Asked Questions

Q: Can the BMXCPS3500H operate at temperatures below 0 deg C?

A: Yes. Its specified operating temperature range extends from -25 to +70 deg C. However, the available secondary power ratings are reduced compared with operation between 0 and 60 deg C.

Q: Is the BMXCPS3500H compatible with all Modicon X80 backplanes?

A: No. The specified compatibility restriction excludes BMEXBP..02 backplanes. Check the exact backplane reference before selecting this module as a replacement.

Q: What happens if a secondary power circuit experiences an overload or short circuit?

A: The secondary circuits include overload, overvoltage and short-circuit protection. The module also provides separate rack voltage and sensor voltage status indicators for local diagnosis.

Thanh toán: T/T, Western Union.

Cảng vận chuyển: Hạ Môn.

Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).

Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.

Câu hỏi thường gặp

Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trả

Nhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.

Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.

Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.

Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.

Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.

Products FAQs

Bạn cũng có thể thích