
Đã thông báo qua email khi sản phẩm này có sẵn
- Mô tả
- Reviews
- Vận chuyển & Thanh toán
The BMXDRA0815 is an 8-channel discrete relay output module in the Schneider Electric Modicon X80 range. It provides eight electrically isolated normally open (NO) relay outputs for switching AC or DC loads. The module supports rated load voltages of 24-240 V AC and 24-125 V DC, with positive output logic and a standard protective coating. It is designed for Modicon M340 and M580 automation platforms.
Output Configuration and Operation
The BMXDRA0815 uses electromechanical relay contacts to switch external loads. Each of its eight output channels operates as a normally open contact, closing when the corresponding output command is activated and opening when the command is removed.
The relay contacts support both AC and DC switching. Unlike transistor output modules, relay outputs can switch different voltage types without requiring the external load to use the same voltage as the PLC's internal logic supply. The eight outputs are electrically isolated, allowing separate load circuits within the limits of the module's electrical ratings.
Switching Characteristics and Load Protection
The module has an activation response time of 10 ms or less and a deactivation response time of 13 ms or less. These characteristics should be considered when selecting the module for applications involving frequent switching or time-sensitive output sequences.
The permissible switching load depends on voltage, load type, ambient temperature and electrical operating conditions. Inductive loads require particular attention because switching can generate voltage transients across relay contacts.
- AC inductive loads require an appropriately rated RC circuit or ZNO-type surge limiter across each output channel.
- DC inductive loads require a discharge diode on each output channel.
- External fast-blow fuses are required for short-circuit and overload protection.
The minimum switching load is also relevant when controlling low-current signals. Contact operation should be checked against the manufacturer's specified minimum load rather than assuming that the rated voltage range guarantees reliable switching at every current level.
Modicon X80 Platform Integration
The BMXDRA0815 belongs to the Modicon X80 common I/O architecture, which provides a shared hardware environment for Modicon M340 and M580 PLC systems. It can be used in local or remote I/O configurations, subject to the selected PLC architecture and rack arrangement.
The module is installed in an appropriate X80 module rack and secured using two mounting screws. Its field connections use a compatible 20-pin connection arrangement, with cage-clamp, screw-clamp or removable spring-type terminal block options.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRA0815 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 8 |
| Output Type | Electromechanical Relay |
| Contact Configuration | 8 Normally Open (NO) |
| Output Isolation | Electrically isolated channels |
| Discrete Output Logic | Positive |
| Rated AC Voltage | 24-240 V AC |
| Rated DC Voltage | 24-125 V DC |
| Minimum Switching Load | 5 V DC / 10 mA |
| Output Activation Time | 10 MOhm at 500 V DC |
| Dielectric Strength | 1780 V AC at 50/60 Hz for 1 min |
| MTBF | 3,200,000 h (product specification) |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95% at 60 deg C, non-condensing |
| Protection Rating | IP20 |
| Protective Coating | Standard version |
| Product Weight | 0.169 kg |
| EAN | 3606481275608 |
| Lifecycle Carbon Footprint | 157 kg CO2 eq. |
Frequently Asked Questions
Q: How many relay outputs does the BMXDRA0815 provide?
A: It provides eight electrically isolated normally open relay outputs. Each channel can switch an external AC or DC load within its specified electrical switching limits.
Q: Can the BMXDRA0815 switch both AC and DC loads?
A: Yes. Its rated voltage ranges are 24-240 V AC and 24-125 V DC. However, permissible switching power and current depend on the load type and operating conditions. Inductive loads require appropriate external suppression components.
Q: Is the BMXDRA0815 compatible with Modicon M340 and M580 PLC systems?
A: Yes. It belongs to the Modicon X80 I/O family and is specified for Modicon M340 and M580 local or remote I/O configurations. The selected rack, connection block and system architecture must support the module.
Thanh toán: T/T, Western Union.
Cảng vận chuyển: Hạ Môn.
Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).
Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.
Câu hỏi thường gặp
Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trảNhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.
Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.
Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.
Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.
Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.
Bạn cũng có thể thích
Bài đăng blog
Tin tức về tự động hóa công nghiệp, hướng dẫn kỹ thuật và cập nhật sản phẩm.
