
Đã thông báo qua email khi sản phẩm này có sẵn
- Mô tả
- Reviews
- Vận chuyển & Thanh toán
The Schneider Electric BMXDRC0805 is an 8-channel relay discrete output module in the Modicon X80 range. It provides isolated relay contacts with normally open (NO) and normally closed (NC) configurations for switching AC and DC loads. Its output voltage range covers 24 to 240 VAC and 24 to 125 VDC, making it suitable for integration into Modicon M340 and M580 local or remote I/O architectures.
Output Configuration and Operation
The BMXDRC0805 uses electromechanical relay outputs to switch external loads according to commands from the PLC. Its 8 isolated relay outputs provide complementary NO and NC contacts, allowing the output circuit to be configured according to the requirements of the connected equipment.
The module supports positive or negative output logic. The minimum switching current is 10 mA at 5 VDC. The specified response times are no more than 10 ms for activation and 13 ms for deactivation, which should be considered when evaluating output timing in the control sequence.
Electrical Characteristics and Protection
The output circuits support switching voltages from 24 to 240 VAC or 24 to 125 VDC. The actual load current capacity is not specified in the supplied data, so the connected load must be checked against the manufacturer's output current ratings before installation.
The module specifies external short-circuit, overload and inductive-load overvoltage protection requirements. Its insulation resistance is greater than 10 MOhm at 500 VDC, and its dielectric strength is 1780 VAC at 50/60 Hz for 1 minute.
PLC Integration and Installation
The BMXDRC0805 belongs to the Modicon X80 common I/O platform, which supports Modicon M340 and M580 PLC architectures, including local and remote I/O configurations. It is installed on the PLC rack and secured with two screws.
Electrical connections use a 40-way removable terminal block. Supported terminal block types include caged, screw-clamp and spring connections. The terminal block must be selected separately according to the required wiring arrangement.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRC0805 |
| Brand | Schneider Electric |
| Product Type | Relay Discrete Output Module |
| Product Range | Modicon X80 |
| Number of Outputs | 8 |
| Output Type | Isolated relay outputs |
| Contact Configuration | NO / NC, complementary |
| Discrete Output Logic | Positive or negative |
| Output Switching Voltage | 24-240 VAC / 24-125 VDC |
| Minimum Switching Current | 10 mA at 5 VDC |
| Output Activation Time | 10 MOhm at 500 VDC |
| Dielectric Strength | 1780 VAC, 50/60 Hz, 1 min |
| Protection Requirements | External short-circuit, overload and inductive-load overvoltage protection |
| Mounting | Modicon X80 rack, secured with 2 screws |
| Connection | 40-way removable terminal block |
| Terminal Block Types | Caged, screw-clamp or spring |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95%, non-condensing |
| Dimensions (W x D x H) | 32 x 100 x 86 mm |
| Net Weight | 0.189 kg |
| Certifications | CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy |
| Standards | EN 61000-6-5, EN 61850-3, EN 61131-2 |
| Country of Origin | USA |
| GTIN | 3606489485061 |
Frequently Asked Questions
Q: Which PLC platforms support the BMXDRC0805?
A: The BMXDRC0805 is designed for Modicon M340 and Modicon M580 PLC architectures. It supports both local and remote I/O configurations within the Modicon X80 platform.
Q: What terminal block is required for the BMXDRC0805?
A: The module uses a 40-way removable terminal block. Caged, screw-clamp and spring-type connections are specified as supported options. The appropriate terminal block must be selected for the installation.
Q: Can the BMXDRC0805 switch both AC and DC loads?
A: Yes. Its relay outputs support 24-240 VAC and 24-125 VDC switching voltages. However, the load current rating must also be checked against the manufacturer's specifications before connecting field devices.
Thanh toán: T/T, Western Union.
Cảng vận chuyển: Hạ Môn.
Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).
Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.
Câu hỏi thường gặp
Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trảNhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.
Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.
Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.
Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.
Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.
Bạn cũng có thể thích
Bài đăng blog
Tin tức về tự động hóa công nghiệp, hướng dẫn kỹ thuật và cập nhật sản phẩm.
