Chuyển đến thông tin sản phẩm
1 của 3

Schneider BMXEAE0300 Modicon X80 SSI Encoder Interface Module

18 còn hàng
  • Manufacturer: Schneider
  • Product No.: BMXEAE0300
  • Country of origin: France
  • Product Type: Modicon X80 SSI Encoder Interface Module
  • Condition: Mới hoàn toàn
  • Payment: T/T, Western Union
  • Weight: 0.138 kg
  • Shipping port: Hạ Môn
  • Warranty: 12 tháng
  • Mô tả
  • Reviews
  • Vận chuyển & Thanh toán

The Schneider BMXEAE0300 is a three-channel SSI encoder interface module in the Modicon X80 range. It acquires position data from 24 V DC SSI absolute encoders and transfers the digital information to the automation system. Each channel supports data lengths from 8 to 31 bits, with selectable transmission rates up to 1 MBaud. The module also provides digital input and reflex output functions for encoder-related signal handling.

Technical Specifications

Parameter Specification
Model BMXEAE0300
Brand Schneider Electric
Product Type SSI Encoder Interface Module
Product Series Modicon X80
Number of Channels 3 SSI channels
Data Format 8-31 bits
Transmission Rates 100 kBaud, 200 kBaud, 500 kBaud, 1 MBaud
Update Time 1 ms
Encoder Compatibility 24 V DC SSI absolute encoders
Encoder Voltage Range 19.2-30 V DC
Encoder Current Capacity 200 mA per channel
Digital Inputs 2 x 24 V DC inputs shared across 3 SSI channels
Digital Outputs 1 x 24 V DC digital reflex output per SSI channel
Nominal Operating Voltage 24 V DC
Operating Voltage Range 19.2-30 V DC
Operating Current Less than 30 mA at 24 V DC (typical)
Backplane Current Consumption 150 mA at 3.3 V DC (typical); 250 mA (maximum)
Dielectric Strength 1400 V DC for 60 s
Protection DC overvoltage protection
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Operating Altitude 0-4000 m
Weight 0.138 kg
Mounting Module rack installation, secured with 2 screws
Certifications CE, UL, CSA, RCM, EAC, Merchant Marine
Standards IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201
EU Directives 2014/35/EU, 2014/30/EU
EAN 3595864126685
Lifecycle Carbon Footprint 48 kg CO2 eq.

SSI Encoder Signal Processing

The BMXEAE0300 receives serial position data from SSI absolute encoders. SSI uses a synchronous serial communication method in which clock signals coordinate the transmission of encoder data to the receiving controller. The module supports data lengths between 8 and 31 bits, allowing different encoder resolution formats to be handled according to the selected configuration.

The three independent SSI channels allow multiple absolute encoders to be connected through one interface module. The available transmission rates are 100 kBaud, 200 kBaud, 500 kBaud and 1 MBaud. The specified update time is 1 ms, which is relevant when evaluating position acquisition requirements and controller response timing.

Digital I/O Functions

In addition to SSI data acquisition, the module provides digital signal interfaces associated with encoder operation:

  • Two 24 V DC digital inputs: Shared across the three SSI channels for signal acquisition and control-related functions.
  • Three 24 V DC reflex outputs: One output per SSI channel for encoder-related digital output functions.

These additional I/O points allow the module to handle associated digital signals without requiring every signal to be processed through a separate general-purpose I/O module. Their exact operating behavior depends on the configured module functions.

Power Supply and Backplane Consumption

The module operates with a nominal 24 V DC supply, with an allowable operating voltage range of 19.2-30 V DC. The encoder supply specification also identifies a current capacity of 200 mA per channel, which should be considered when checking the connected encoder load.

The backplane current consumption is specified separately from the encoder supply: 150 mA typical and 250 mA maximum at 3.3 V DC. These figures are relevant when calculating the power requirements of the Modicon X80 rack and checking the available capacity of its power supply.

Installation and Environmental Conditions

The BMXEAE0300 is designed for installation in a Modicon X80 module rack and must be secured using two screws. Its IP20 enclosure provides protection against contact with internal electrical components but does not provide protection against water ingress.

The specified operating temperature is 0 to 60 deg C, with an operating altitude of up to 4000 m. The module is listed for use in Modicon M340 and Modicon M580 automation architectures through the Modicon X80 common I/O platform.

Frequently Asked Questions

Q: How many SSI absolute encoders can the BMXEAE0300 connect?

A: The module provides three SSI channels, allowing connection of up to three compatible SSI absolute encoders. Each encoder must meet the specified 24 V DC interface and 200 mA per-channel supply conditions.

Q: What encoder data lengths and communication speeds does this module support?

A: The BMXEAE0300 supports data lengths from 8 to 31 bits and four transmission rates: 100 kBaud, 200 kBaud, 500 kBaud and 1 MBaud. The selected settings must match the connected encoder's communication specifications.

Q: Can the BMXEAE0300 be installed in a Modicon M340 or M580 system?

A: Yes. The module belongs to the Modicon X80 common I/O platform, which is specified for Modicon M340 and Modicon M580 automation architectures. The target rack configuration and system hardware compatibility should be checked before installation.

Thanh toán: T/T, Western Union.

Cảng vận chuyển: Hạ Môn.

Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).

Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.

Câu hỏi thường gặp

Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trả

Nhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.

Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.

Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.

Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.

Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.

Products FAQs

Bạn cũng có thể thích