
Đã thông báo qua email khi sản phẩm này có sẵn
- Mô tả
- Reviews
- Vận chuyển & Thanh toán
The Schneider BMXEHC0800H is an 8-channel high-speed counter module in the Modicon X80 I/O family, designed for counting and frequency measurement in industrial automation systems. It supports counting frequencies up to 10 kHz and accepts signals from 19.2-30 V DC two-wire or three-wire proximity sensors and 10-30 V DC push-pull incremental encoders. Its extended operating temperature range is -25 to 70 deg C.
Counting Functions and Signal Processing
The BMXEHC0800H processes high-speed input signals for counting and measurement tasks. Its supported functions include:
- Up/down counting
- 32-bit up-counting
- Down-counting
- Modulo counting
- Frequency measurement
- Counting event detection
The module supports 8 high-speed channels, with 2 inputs in single-mode operation or 3 inputs in a specific two-phase operating mode. The maximum counting frequency is 10 kHz, making it suitable for applications that require pulse counting and incremental position or speed-related signal processing.
Input Compatibility and Electrical Characteristics
The module accepts signals from 19.2-30 V DC two-wire and three-wire proximity sensors, as well as incremental encoders with 10-30 V DC push-pull outputs. The guaranteed logic thresholds define the valid input states: 11-30 V DC for logic 1 and 5 V DC for logic 0.
The 4.5 mA input current and 5 ms cycle time are relevant when evaluating sensor output characteristics and the timing requirements of the counting application. The specified 1500 V insulation voltage applies for 60 seconds.
Electrical Connection and Power Requirements
The BMXEHC0800H uses one 20-pin connector for its electrical connections. Its power consumption is divided between the internal bus supply and the encoder supply:
- 200 mA at 3.3 V DC bus
- 80 mA at 24 V DC encoder supply
These are separate supply requirements and should be considered when checking the available capacity of the PLC rack power supply and the external encoder supply.
Installation and Environmental Conditions
The module is designed for installation in a Modicon X80 module rack and is secured with two screws. Its IP20 enclosure protects the electronic components against contact and solid foreign objects within the limits of this protection rating; it does not provide protection against water ingress.
The extended operating temperature range of -25 to 70 deg C and specified resistance to gases, dust, sand, salt, and biological contaminants support its use in demanding installation environments. Relative humidity is specified at 10-95%, with condensation not permitted.
Certifications and Standards
The product carries the following certifications and environmental classifications according to the supplied Schneider specifications:
- CE, UL, CSA, RCM and EAC
- Merchant marine
- ATEX Zone 2/22
- IECEx Zone 2/22
- Class I, Division 2 hazardous-location classification
- IEC 61131-2 and IEC 61010-2-201
- IACS E10
- EN/IEC 61850-3, Location G
- EN/IEC 61000-6-5, Interface Types 1 and 2
The specifications also identify gas resistance Class Gx under ISA S71.04, gas resistance Class 3C4, dust and sand resistance Class 3S4, and mould resistance Class 3B2.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXEHC0800H |
| Brand | Schneider Electric |
| Product Type | High-Speed Counter Module |
| Product Family | Modicon X80 |
| Automation Platform | Modicon M340 |
| Number of Channels | 8 |
| Maximum Counting Frequency | 10 kHz |
| Number of Inputs | 2 in single mode; 3 in special two-phase mode |
| Input Type | High-speed |
| Input Voltage | 24 V DC, Type 3 |
| Input Voltage Limits | 24 V DC |
| Input Current | 4.5 mA |
| Guaranteed Logic 1 Voltage | 11-30 V DC |
| Guaranteed Logic 1 Current | Greater than 2 mA at U >= 11 V |
| Guaranteed Logic 0 Voltage | 5 V DC |
| Guaranteed Logic 0 Current | Less than 1.5 mA |
| Compatible Sensors | 19.2-30 V DC 2-wire/3-wire proximity sensors |
| Encoder Compatibility | 10-30 V DC push-pull incremental encoders |
| Counting Functions | Event counting, up/down counting, modulo counting, frequency measurement, 32-bit up-counting and down-counting |
| Cycle Time | 5 ms |
| Insulation Voltage | 1500 V for 60 s |
| Electrical Connection | 1 x 20-pin connector |
| Bus Current Consumption | 200 mA at 3.3 V DC |
| Encoder Supply Current | 80 mA at 24 V DC |
| Module Format | Standard |
| Protective Coating | Conformal coating |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Protection Rating | IP20 |
| Environmental Resistance | Gas, dust, sand, salt and mould resistance classifications specified |
| Product Certifications | CE, UL, CSA, RCM, EAC, Merchant Marine, ATEX, IECEx |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10 |
| Product Weight | 0.113 kg |
| EAN | 3595864010427 |
| Lifecycle Carbon Footprint | 103 kg CO2 eq. |
Frequently Asked Questions
Q: How many high-speed channels does the BMXEHC0800H provide?
A: The module provides 8 high-speed channels, with 2 inputs in single-mode operation and 3 inputs in its specified special two-phase operating mode. The maximum counting frequency is 10 kHz.
Q: Which sensors and encoders are compatible with the BMXEHC0800H?
A: It supports 19.2-30 V DC two-wire and three-wire proximity sensors, along with incremental encoders featuring 10-30 V DC push-pull outputs. The sensor output voltage and current characteristics must meet the module's specified input thresholds.
Q: What installation conditions should be checked before replacing this module?
A: Verify the Modicon X80 rack installation, two-screw fastening arrangement, 20-pin connection, bus power requirements and 24 V DC encoder supply. Also check the sensor configuration, counting mode and operating temperature requirements before commissioning.
Thanh toán: T/T, Western Union.
Cảng vận chuyển: Hạ Môn.
Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).
Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.
Câu hỏi thường gặp
Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trảNhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.
Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.
Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.
Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.
Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.
Bạn cũng có thể thích
Bài đăng blog
Tin tức về tự động hóa công nghiệp, hướng dẫn kỹ thuật và cập nhật sản phẩm.
