
Đã thông báo qua email khi sản phẩm này có sẵn
- Mô tả
- Reviews
- Vận chuyển & Thanh toán
The Schneider Electric BMXNRP0200 is a two-channel fiber optic Ethernet repeater from the Modicon X80 range. It converts two 100BASE-TX copper Ethernet connections to two 100BASE-FX multimode fiber connections, extending Ethernet communication over distances of up to 2,000 m. It operates at 24 VDC and supports IEEE 802.3u Ethernet interfaces.
Ethernet and Fiber Optic Interfaces
The BMXNRP0200 provides four Ethernet connections:
- 2 x RJ45 ports supporting 100BASE-TX.
- 2 x multimode fiber optic ports supporting 100BASE-FX.
- Ethernet interface compliance with IEEE 802.3u.
- Optical wavelength: 1310 nm.
- Maximum operating distance: 2,000 m.
The repeater transfers Ethernet communication between copper and fiber optic network segments. Fiber connections allow communication over longer distances than conventional copper Ethernet cabling and provide electrical isolation between connected network segments.
Optical Transmission Characteristics
The optical interface operates at a wavelength of 1310 nm. Its specified attenuation ranges depend on the multimode fiber core size:
- 50/125 um fiber: -23.5 to -14 dB.
- 62.5/125 um fiber: -20 to -14 dB.
The receiver sensitivity is specified from -31 to -14 dBm, with a rise/fall time of 3 ns. These values are relevant when checking fiber characteristics, optical signal levels and the transmission path against the required communication distance.
Power Supply and Diagnostics
The module operates with a rated voltage of 24 VDC. Its typical current consumption is 140 mA, with a maximum of 200 mA. Local LED indicators provide information about power status, error conditions, Ethernet link status, and fiber connection status and activity.
The BMXNRP0200 supports hot swapping according to the manufacturer's product specifications. This function is relevant when planning module replacement and maintenance procedures within the applicable Modicon X80 installation.
Installation and Environmental Conditions
The BMXNRP0200 is designed for installation in a module carrier and is secured with two screws. Ethernet interlink cables provide connections to CRA drop adapters in the described Modicon architecture.
Its IP20 enclosure rating is intended for installation inside a suitable equipment enclosure. The specified operating temperature is 0 to 60 deg C, while the storage temperature range is -40 to 70 deg C. The module also supports relative humidity from 0 to 95% and an operating altitude of up to 4,000 m.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNRP0200 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Fiber Optic Ethernet Repeater |
| Fiber Type | Multimode |
| Rated Voltage | 24 VDC |
| Typical Current Consumption | 140 mA |
| Maximum Current Consumption | 200 mA |
| Copper Ethernet Ports | 2 x RJ45, 100BASE-TX |
| Fiber Ethernet Ports | 2 x 100BASE-FX |
| Ethernet Standard | IEEE 802.3u |
| Optical Wavelength | 1310 nm |
| Operating Distance | 0 to 2,000 m |
| Attenuation (50/125 um) | -23.5 to -14 dB |
| Attenuation (62.5/125 um) | -20 to -14 dB |
| Receiver Sensitivity | -31 to -14 dBm |
| Rise/Fall Time | 3 ns |
| Hot Swapping | Supported |
| Local Diagnostics | Power, error, Ethernet link, fiber link and activity LEDs |
| Dielectric Strength | 1,400 VDC between field and bus; 500 VDC between channels |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 70 deg C |
| Relative Humidity | 0 to 95% |
| Maximum Operating Altitude | 4,000 m |
| Dimensions (W x H x D) | 32 x 100 x 86 mm |
| Weight | 203 g |
| Product Standards | IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201 |
| Certifications | CE, RCM, CSA, EAC, UL, Merchant Navy |
| EAN | 3595864142753 |
| Lifecycle Carbon Footprint | 167 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between the two Ethernet interfaces on the BMXNRP0200?
A: The two RJ45 ports use 100BASE-TX copper Ethernet, while the two fiber optic ports use 100BASE-FX multimode fiber. This configuration allows copper Ethernet network segments to communicate through fiber optic connections.
Q: What fiber optic cable distance does the BMXNRP0200 support?
A: The specified operating distance is 0 to 2,000 m. The actual fiber installation must also satisfy the specified attenuation and receiver sensitivity limits for the selected multimode fiber type.
Q: Does the BMXNRP0200 support hot swapping?
A: Yes. Hot swapping is listed as a supported function in the product specifications. Replacement procedures should still follow the applicable Modicon X80 system and installation requirements.
Thanh toán: T/T, Western Union.
Cảng vận chuyển: Hạ Môn.
Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).
Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.
Câu hỏi thường gặp
Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trảNhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.
Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.
Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.
Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.
Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.
Bạn cũng có thể thích
Bài đăng blog
Tin tức về tự động hóa công nghiệp, hướng dẫn kỹ thuật và cập nhật sản phẩm.
